智能制造網APP
智能制造網手機站
智能制造網小程序
智能制造網官微
智能制造網服務號
YG13H內螺紋蒸汽減壓閥
- 質量穩定：實行全過程質量監控，細致入微，*檢測！
- 價格合理：高效內部成本控制，減少了開支，讓利于客戶！
- 交貨快捷：*生產流水線，充足的備貨，縮短了交貨期！
- 服務：4007-285-265
- 傳真：
- ：
YG13H內螺紋蒸汽減壓閥
結構特點和用處
YG13H內螺紋高靈敏度蒸汽減壓閥屬于先導活塞式減壓閥。由主閥和導閥兩部分組成。主閥主要由閥座、主閥盤、活塞、彈簧等零件組成。導閥主要由閥座、閥瓣、膜片、彈簧、調節彈簧等零件組成。通過調節調節彈簧壓力設定出口壓力、利用膜片傳感出口壓力變化，通過導閥啟閉驅動活塞調節主閥節流部位過流面積的大小，實現減壓穩壓功能。
本系列產品在普通減壓閥基礎上做了以下改進，加大了活塞面積，改變了節流結構，改變了密封形式，改進了導閥結構和調節彈簧形式，從而從以下幾方面提高了產品的性能。
1、 提高了對出口壓力變化的傳感效能，提高了靈敏度，大大降低了因上游壓力變化，流量變化等因素引起的壓力偏差。
2、改善了流線分布，降低了噪聲。
3、改進了密封面結構，延長了密封面壽命。
本產品主要用于蒸汽管路，適用于進口壓力變化大，流量變化大的蒸汽管路。
主要技術參數和性能指標
| 公稱壓力（Mpa） | 1.0 | 1.6 |
| 殼體試驗壓力（Mpa）* | 1.5 | 2.4 |
| 密封試驗壓力（Mpa） | 1.0 | 1.6 |
| zui高進口壓力（Mpa） | 1.0 | 1.6 |
| 出口壓力范圍（Mpa） | 0.04-0.6 | 0.04-1.0 |
| 壓力特性偏差（Mpa）△P2P | GB12246-1989 | |
| 流量特性偏差（Mpa）P2G | GB12246-1989 | |
| zui小壓差（Mpa） | 0.05 | 0.07 |
| 滲漏量 | GB12245-1989 | |
*：殼體試驗不包括膜片、頂蓋
主要零件材料
| 零件名稱 | 零件材料 |
| 閥體 閥蓋 底蓋 | WCB |
| 閥座 閥瓣 | 2Cr13 |
| 缸套 活塞 | 鋁鐵青銅 |
| 膜片 | PH15-7Mo |
| 活塞環 | 對位聚苯 |
| 導閥座 導閥瓣 | 2Cr13 |
| 主閥彈簧 | 50CrVA |
| 導調主彈簧 | 50CrVA |
| 調節彈簧 | 60Si2Mn |
流量系數（Cv）
| DN | 25 | 32 | 40 | 50 | 65 | 80 |
| Cv | 4 | 6.5 | 9 | 16 | 25 | 36 |
YG13H inner screw steam pressure reducing valve
Structure characteristic and use
YG13H internal thread high sensitivity steam pressure reducing valve belongs to the pilot piston type pressure-reducing valve. From the main valve and pilot valve composed of two parts. Main valve mainly comprises a valve seat, the main valve disc, piston, springs and other parts. Mainly by the pilot valve seat, valve, diaphragm, spring, adjusting springs and other parts. Adjusting the spring pressure by adjusting the outlet pressure setting, using changes in outlet pressure sensing diaphragm, through the pilot valve opening and closing the main valve piston adjusting throttle position for driving the flow area of the size, to achieve decompression function.
This series of products in the ordinary decompression valve base made the following improvements, increase the piston area, changing the throttle structure, changes the sealing form, improved pilot valve structure and adjust the spring form, which from the following aspects of improving the performance of the product.
1, improve the outlet pressure change sensing performance, improved sensitivity, greatly reduced due to the upstream pressure, flow changes caused by factors such as the pressure deviation.
In 2, to improve the streamline distribution, reduces noise.
3, improved sealing face structure, prolongs the life of sealing surface.
The products are mainly used in steam pipeline, applicable to the variation of the inlet pressure, the flow changes Steam pipeline.
The main technical parameters and performance index
本文地址：http://www.mogojianyafa。。ｃｏｍ/cp/jyf/18.html
全國統一：4007 285 265 | ：+86-21-51860785 +86-21-51860795 | 圖文+86-21-51714564 | ：shmgfm
上海閔高閥門有限公司 - 廠址：上海市工業綜合開發區大葉公路2386號
Copyright © 2012 上海閔高閥門有限公司，版權所有。
