美國泛美Panametrics 25 MULTI PLUS 超聲波測厚儀

The Panametrics-NDT™ Model 25 MULTI PLUS is an advanced ultrasonic precision thickness gage with several unique measurement capabilities. In addition to making thickness measurements on metal, plastic and many other materials with varying thickness ranges, the 25 MULTI PLUS has the ability to calculate and simultaneously display up to four separate measurements. The Summation Mode accurately displays total thickness of selected layers.
Another unique feature of the 25 MULTI PLUS is the Barrier Layer Mode. This feature makes it possible to measure critical barrier layers in multilayer plastic parts such as gas fuel tanks and bottle preforms. This special Mode displays the thickness of thin barrier layers that are typically too difficult to measure with conventional ultrasonic thickness gages because of lack of separation between the echo from the front and back of the barrier layer.

The 25 MULTI PLUS is ideal for the following applications:
• Multilayer fuel tanks
• Multilayer plastic bottle preforms
• Calculating radius of curvature and the thickness of contact lenses
• Multilayer aircraft windows
• Co-extruded plastic
• Two layer hot tubs and spas
• Two layer automotive air intake ducts

Features

• A-scan Display for Waveform Verification
• Wide Thickness Range: 0.003" to 20.000" (0.08 mm- 508.00 mm)
• Resolution up to 0.0001" (0.001 mm)
• Uses Contact, Delay Line, and Immersion transducers
• Internal Alphanumeric File-Based Datalogger stores 18,000 thickness or 1,750 waveforms
• Application Auto-Recall with Stored Standard and Custom Setups

25 MULTI PLUS Specifications*

Measurements

Thickness Measurement Range:

Thickness range depends on material, transducer, surface condition,temperature, and SETUP selected.

Barrier Layer Plastic Mode:
Only for Mode 1 and 2, Thickness Range
0.004 - 0.020 inches (0.100 - 0.50 mm).*

Multilayer Measurement Mode:
Simultaneously displays up to four thickness measurements.
Summation Mode: Displays the sum of up to three layer thickness measurements.
Material Velocity Range:
0.02000 - 0.55110 inch/µS
(0.5080 - 13.9979 mm/µS)
Resolution: (keypad selectable)

Transducer Frequency Range:
2-30 MHz (-3 dB)

Min/Max Mode
Two Alarm Modes: Programmable Hi-Low Alarm with audible and visual indicators
1) Standard Hi-Low
2) Previous thickness
-Absolute
-Percentage

Two Differential Modes:
1) Thickness difference between actual measurement and reference value
2) Percent difference between actual measurement and reference value

Application Auto-Recall: Automatically adjusts internal parameters and zero offset for a wide variety of transducers.
Stored Standard Setups: 25 stored transducer setups to allow fast, easy calibration for our standard transducers.
Stored Custom Setups: Up to 35 stored custom transducer setups for best performance in special applications.

Power Supply
Battery: 6 V Rechargeable NiCad battery pack
Battery Life: 25 hours in normal measurement mode with backlight off
Fast-Charger: Two-hour Fast Charger with universal voltage

GENERAL
Keypad: Sealed color-coded keypad with tactile and audible feedback
Case: Water-resistant, gasketed Lexan® case with sealed connectors
Metric/English Units
Auto Power Off: On or off
Size: 9.375" x 5.45" x 1.5"
(238 x 138 x 38 mm)
Weight: 2.1 lbs. (0.95 kg)
Operating Temperature:
-10°C to +50°C. (+14°F to 122°F)

DISPLAY
Display: Liquid crystal display with backlight. Contrast keypad adjustable. Display area 4.0" x 3.39" (102 x 86 mm)
Backlight, Zoom Mode, Freeze Mode and Hold/Blank
Rectification: RF, half wave positive or negative, and full wave
WaveformDisplay Rangeａnd Delay Control

INTERNAL DATALOGGER
Datalogger and RS-232: Identifies, stores, recalls, clears, and transmits thickness readings, waveform images, and gage setup information via the RS-232 Serial Port. Baud Rate, Word Length, Stop Bits, and Parity are adjustable from the keypad.

Maximum # of Stored Values:

Standard Inclusions
Model 25 MULTI PLUS Digital Ultrasonic Multilayer Thickness Gage, AC or Battery Operation, 50-60Hz, with Internal Alphanumeric Datalogger.
Including: Universal Quick Charger/AC Adapter, Transducer Cable, Test Block, Couplant, RS-232 I/O Cable, Carrying Case Instruction Manual and a Two Year Limited Warranty

Optional Accessories

Please contact us for other accessories available with the Model 25 MULTI PLUS.

*All specifications are subject to change without notice.

Some 25 MultiPlus Applications