質量/安全認證ISO9001:2000

Quality/Safety Certification ISO9001-2000

電源要求 Power supply requirement：220V/50HZ

平面燙金機Electric Plane Gilding Press

技術參數 Technical Parameter:

1.      燙金面積 Gilding area:210*290mm

2.      工作臺面積  Area of the worktable :400mm*320mm

3.      zui大壓力 Max. pressure:4000Kg

4.      上下行程 Up and down throw:40mm （加高80mm Can be increased to 80mm）

5.      加熱功率 Power of heating :1000W（根據燙金面積 According to gilding area）

6.      輸紙方式  Paper feeding method: 電機驅動 Motor driven

1.      溫度范圍  Temperature range: 室溫 Room temperature -300°C

電動平面燙金機Electric Plane Gilding Press

產品優點 Product advantage:

1.      電器控制運行. Electric controlled operation.

2.      溫控器發熱溫度穩定. Heating temperature is stabilized by temperature controller.

3.      垂直壓力曲軸設計,壓力強勁. Vertical pressure crankshaft design which gives powerful pressing force.

4.      燙印壓力、溫度、速度均可調；Adjustable hot stamping pressure, temperature and speed;

1.      工作臺可進行多方位和角度調節. Multi-orientation and angle adjustment of the worktable.

2.      自動送紙,收紙，并可調 Adjustable automatic paper feeding and receiving.

3.      可按照要求加裝光電管實行節距控制. Photoelectric celled can be installed for pitch control according to requirement.

4.      工作臺高度可靈活調整。Worktable height can be adjusted freely.

產品描述 Product description：

平面燙印機手工拿放工件，全過程自動工藝過程，鋼板基座，燙金過程平穩；垂直壓力、可在紙張、塑料、皮革、PVC、木材等產品燙金、壓痕、起凸。

The workpiece is loaded and unloaded manually. Full automatic processing; steel plate base, smooth gilding process; vertical pressing force; it can realize gilding, impressing and embossing of paper, plastic, leather, PVC and wood products.

http://www.gzpingwei.com/