智能制造網APP
智能制造網手機站
智能制造網小程序
智能制造網官微
智能制造網服務號
TD-11VL01-2探測器Gigahertz-Optik
TD-11VL01-4探測器Gigahertz-Optik
Modular light detectors are designed to be combined with optics and mechanical components to configure complete light detection assemblies for a specific light measurement application. A mechanical interface is provided to make mounting or adding other components easy and flexible.
Photometric Responsivity
The TD-11VL01 detector is compact in size and fit the DP-11 detector port interface of integrating spheres directly or can be mounted to most Gigahertz-Optik integrating spheres using an adapter. The TD-11VL01 offers an accurate CIE V(λ) spectral match. It is most commonly used with integrating spheres for total flux measurements or as monitor detector on integrating sphere light sources.
Temperature Stabilized
The TD-11VL01 photometric detector features thermo-electric temperature stabilization where the detector is heated up to a controlled operating temperature of 50°C. The most common use for the TD-11VL01 detector is with integrating spheres where housing temperature increases during operation. The control electronics are housed in a separate case and powered by a plug-in power supply.
Traceable Calibration
Optional calibration is available by Gigahertz-Optik’s Calibration Laboratory for Optical Radiation Quantities.
| KDW-P | Calibration in photometric units with and without complementary products. | ||
| K-VIS-SR | Calibration of the relative spectral responsivity in the visible spectral range | ||
| Specification | |||
| Spectral function | photometric V(λ) | ||
| V(λ) matching error | f1 ≤ 5 % | ||
| Typ. Responsivity | 90 pA/(cd/m2) | ||
| Max. signal current | 1 mA | ||
| Measurement entrance | 2.7 x 2.7 mm behind filter | ||
| Temperatute photodiode | ca. 50 °C | ||
| Housing | TD-11, separate electronic | ||
| Power | plug-in power supply | ||
| Connection cable | coaxial cable 2 m Long, with BNC (-1), calibration data (-2) or ITT (-4) connector | ||
| Operation temperature | 5 - 40 ° C | ||
