This is a standard type of transmitter with
built-in head.

GENERAL SPECFICATIONS
Construction : head mount
Housing material : plastic (black)
Wiring : screw terminals on P.C.B (M2.5)
Isolation : none isolation
Weight : about 80g
PERFORMANCE
INSTALLATION
Operating temperature : -5 ~ 55'C
Operating humidity : 30 ~ 90 %RH
Mouting : head mount
Power input : DC 18-28V (Ripple 5%p-p Max.)
INPUT SIGNAL
DC CURRENT : Shunt Resistor attached to Internal PCB
Input resistance : 250ohm less (Specify when ordering)
DC VOLTAGE : -300 ~ +300V/DC
Min. Span : 5mV
Input resistance : 10Kohm more (Specify when ordering)
Insulation resistance : greater than 100Mohm with 500V/DC
Dielectric strength : 1500VAC at 1Min (input, output/housing)
Accuracy : ± 0.2% Max.
Response time : 0.5 Sec. /0-90%
MODEL & SPECIFICATION CODE
MODEL
INPUT TYPE
DC : DC SIGNAL
RT : RTD SENSOR
PM : POTENTIOMETER
MR - 2WXX
INPUT RANGE
ex) INPUT : 2 ~ 16 mA
POWER SUPPLY
DC 18 - 24 V
X X
OUTPUT SIGNAL
DC CURRENT : 4 - 20 mA
Min. Span : 4mA
Load resistance : 650ohm at 20mA