Opticut No. 435

Ergonomically styled Cutter for use with plastic sheeting and foamed material. For use by right- and lefthanders. The TEFLON®-coated metal base slides readily across any surface for controlled cutting operations. Blade change within seconds. OPTICUT No. 437: with hold-down clip designed to prevent material build-up ahead of the blade edge and to keep fingertips SAFELY away! Push-cut model. OPTICUT No. 436: with reversed hold-down clip. Pull-cut model. OPTICUT No. 435: Same as No. 436, but with additional lateral protector.

OPTICUT安全*，適用于切割膠片及泡沫塑料，與切割面接觸的金屬底板經 “fon” 處理，避免因經常磨擦而損壞。切割面入口帶穩定夾，讓切割作業達*較果，適合左手及右手操作者使用。2邊 / 4點式刀片可重復使用，更具經濟效益。

產品通過德國GS安全檢測認證。

標配刀片:

Industrial cutter blade No. 37040
with square ends, alloyed carbon steel, deep-edged

length: 43.00 mm
Width: 22.00 mm
Material thickness: 0.40 mm

其它刀片選擇

Industrial cutter blade No. 83730（不銹鋼刀片）

with square ends, stainless, TiN-coated

length: 43.00 mm
Width: 22.00 mm
Material thickness: 0.30 mm

Industrial cutter blade No. 13730
with square ends, stainless

length: 43.00 mm
Width: 22.00 mm
Material thickness: 0.30 mm