單點激光測振儀廠家1.2原理：
Julight 公司的激光測振儀是基于新穎的自混頻干涉結構而成的，可以對粗糙發散的表面（比如未拋光的金屬，塑料，橡皮，紙質，纖維等）進行極易而精確的非接觸振動測量。激光測振儀提供模擬的電信號輸出，這些電信號就是在某一頻率的目標位移的復制品（ 1mv/um響應率，對應 1mm/V）。頻率范圍從DC到50KHZ,甚至到10MHZ ,zui小的可測位移為0.4nm (1HZ噪聲寬帶)，zui大的振動幅值（峰峰值）可以大于20mm,zui大的速率可以使1 m/s .
Julight公司的激光測振儀的zui顯著的特點就是具有非常小的光學頭：
-標準光學頭，帶斑點追蹤功能（大小：105mm x 60mm x 40mm)，有定焦和自動對焦兩個版本。
-可選的超小的光學頭，不帶斑點追蹤和自動對焦功能（大小：長50 mm,直徑 15mm）
處理干涉信號的簡單二有效的電子系統可以做得和精致，一臺 VSM400(或 VSM4000)儀器能夠支持4個光學頭（也就是說4個獨立的光學通道），因此，這樣的話，就可以進行同時測量不同點的振動，而無需使用掃描系統來完成。
單點激光測振儀廠家系列產品參數比較表
| Description | VSM1000 | VSM4000 | VSM1000-L | VSM1000-L-EXT | VSM3D |
| Maximum measurable vibration (peak-to-peak) | 43 mm (theoretical) 1 mm (practical) | 43 mm (theoretical) 1 mm (practical) | 43 mm (theoretical) 1 mm (practical) | 43 mm (theoretical) 1 mm (practical) (0-50KHZ) 4 um(practical) (20KHZ-3MHZ) | 43 mm (theoretical) 1mm (practical) |
| Maximum measurable velocity | > 0.5 m/s | > 0.5m/s | 0.5 m/s @ 0.5 m 0.2 m/s @ 5.0 m | 0-50KHZ: 0.5 m/s @ 0.5 m 0.2 m/s @ 5.0 m 20KHZ-3MHZ: 40ms/s | 0.5 m/s |
| Output signals | · Displacement / Velocity(analog, BNC connector) · Monitor (3.5mm jack): - Optical Signal Level (analog) | · Displacement/ Velocity (analog, BNC connector) · Monitor (3.5mm jack): - Optical Signal Level (analog) | · Displacement / Velocity(analog, BNC connector) · Monitor (3.5mm jack): - Optical Signal Level (analog) | · Displacement / Velocity(analog, BNC connector) · Monitor (3.5mm jack): - Optical Signal Level (analog) | · X, Y, Z Displacement (analog, 3x BNC connectors) · Monitor (3.5mm jack): - Optical Signal Level (analog) |
| Output signal responsivity | · Displacement: 0.5 V/mm ·Velocity: 5 V/(m/s) | · Displacement: 0.5 mV/mm ·Velocity: 5 V/(m/s) | · Displacement: 0.5 V/mm ·Velocity: 5 V/(m/s) | 0-50KHZ: · Displacement: 0.5 V/mm ·Velocity: 5 V/(m/s) 20KHZ-3MHZ: 5V/um | · Displacement: 0.5 V/mm |
| Resolution | Noise-limited | Noise-limited | Noise-limited | Noise-limited | Noise-limited |
| Noise Equivalent Displacement | 0.2 nm/ÖHz (from DC to 50 kHz) | 0.2 nm/ÖHz (from DC to 50 kHz) | 0.2 nm/ÖHz @ 0.5 m 1 nm/ÖHz @ 5.0 m | 0.2 nm/ÖHz @ 0.5 m 1 nm/ÖHz @ 5.0 m | 0.2 nm/ÖHz (from DC to 50 kHz) To 10M HZ |
| Output signal accuracy | 1% | 1% | 1% | 0-50KHZ: 1% 20KHZ-3MHZ: 5% | 1% |
| Spatial transversal resolution | 100 mm | 100 mm | 100 mm | 100 mm | 100 mm |
| Target surface | Diffusive or back-reflecting | Diffusive or back-reflecting | Diffusive or back-reflecting | Diffusive or back-reflecting | Diffusive or back-reflecting |
| Working distance | · From 20 to 120 cm (Auto Focus mode) · 20, 40 and 100 cm (Fixed Focus mode) | · From 20 to 120 cm(Auto Focus mode) · 20, 40 and 100 cm (Fixed Focus mode) | · From 0.5 to 5.0 m(Auto Focus mode) · 0.5, 1.0 and 5.0 m (Fixed Focus mode) | · From 0.5 to 5.0 m(Auto Focus mode) · 0.5, 1.0 and 5.0 m (Fixed Focus mode) | · 15 cm (accurate positioning assisted by LED bar indicator) |
| Laser radiation | · Pout < 1 mW @ 650 nm (collimated) | · Pout < 1 mW @ 650 nm (collimated) | · Pout < 1 mW @ 650 nm (collimated) | · Pout < 1 mW @ 650 nm (collimated) | · Pout < 1 mW @ 650 nm (collimated) |
| Laser safety class | · Class 2 @ 650 nm (visible) | · Class 2 (visible) @ 650 nm | · Class 2 @ 650 nm (visible) | · Class 2 @ 650 nm (visible) | · Class 2 @ 650 nm (visible) |
| Optical head | 50 mm x 70 mm x 105 mm | 50 mm x 70 mm x 105 mm | 50 mm x 70 mm x 105 mm | 50 mm x 70 mm x 105 mm | 155 mm x 145 mm x 80 mm |
| Electronic unit dimensions | 12.5 cm x 15.5 cm x 29.6 cm | 24.6 cm x 15.5 cm x 29.6 cm | 12.5 cm x 15.5 cm x 29.6 cm | 12.5 cm x 15.5 cm x 29.6 cm | 24.6 cm x 15.5 cm x 29.6 cm |
| Optical head cable length | 2.5 m (5 m optional) | 2.5 m (5 m optional) | 2.5 m (5 m optional) | 2.5 m (5 m optional) | 2 m (5 m optional) |
| Power supply | · 110-120 VAC / 60 Hz · 220-240 VAC / 50 Hz | · 110-120 VAC / 60 Hz · 220-240 VAC / 50 Hz | · 110-120 VAC / 60 Hz · 220-240 VAC / 50 Hz | · 110-120 VAC / 60 Hz · 220-240 VAC / 50 Hz | · 110-120 VAC / 60 Hz · 220-240 VAC / 50 Hz |
| Power consumption | < 5 W | < 5 W per channel (max 20 W) | < 5 W | < 5 W | < 15 W |
| I/O | RS485 serial port | RS485 serial port | RS485 serial port | RS485 serial port | RS485 serial port |
| Weight | 4 kg | 4¸6 kg | 4 kg | 4 kg | 6 kg |
| Temperature (operating) | Optical head: -20°C to +80°C (-4°F to +176°F) Main unit: | Optical head: -20°C to +80°C (-4°F to +176°F) Main unit: | Optical head: -20°C to +80°C (-4°F to +176°F) Main unit: | Optical head: -20°C to +80°C (-4°F to +176°F) Main unit: | Optical head: 0°C to +80°C (+32°F to +176°F) Main unit: |
注意：以上型號工作距離和頻率范圍可以根據客戶需求定制拓展，工作距離：1.2米，5米，
10米，20米，30米甚至更遠。頻率可以拓展到：3MHZ和10MHZ 。
智能制造網