揚州恩泰機電有限公司專業從事各種國內外中的工控自動化產品的進口貿易與工程服務，主要經營來自歐洲、美國、日本等國的各類自動化產品，并被廣泛用于鋼鐵、冶金、能源、石化、礦山、港口、軌道交通等眾多行業的國家重點企業。本公司供應零件涵蓋廣泛，產品主要包括：繼電器、傳感器、控制器、編碼器、開關、插頭插座、電纜、電機、液壓缸、液壓泵、液壓閥、氣缸、氣動閥、壓力表、空氣閥、球閥、液壓件、液壓膠管、氣動管接頭、電磁閥等種類繁多，歡迎洽詢。

德國Eckelmann 控制器

產用型號：

BI-AOI/4cb 4-20HA

EI-AOI-4C/K

EI-AII-4C/K

EAII-3122-02

EAOI-4140-03

5136-PFB-VME

XCNT01-M01

VME R64

IGVPD

TK16P

UES60S-5A 5V/12A

REG5

EIAOI4C001.2221

EIAOI4CK01

EIAII4CK01

M9738911

TYPE:B   IN:+/-10V   OUT:+/-10MA

PNC55

XPFB03

E.VME-CNTM01

產品介紹：

CONTROLLERS FOR MACHINE AUTOMATION

TopPrint page

ECK­EL­MANN de­vel­ops and pro­duces con­trollers for ma­chine au­toma­tion. The close in­te­gra­tion of hard­ware de­vel­op­ment, man­u­fac­ture and test­ing guar­an­tees so­phis­ti­cat­ed func­tion­al­i­ty and sus­tain­able qual­i­ty.

Con­trollers to re­ly on

The ExC con­troller range of­fers the ap­pro­pri­ate con­trol plat­form for all ap­pli­ca­tions from com­pact de­vice con­trol to com­plex CNC ap­pli­ca­tions. Pro­ces­sor per­for­mance, mem­o­ry and pro­gram­ming can be se­lect­ed for each ap­pli­ca­tion on the ba­sis of cur­rent in­dus­try stan­dards. The fol­low­ing per­for­mance class­es are avail­able:

Ex­C55: The con­troller for ba­sic re­quire­ments

The ba­sic ver­sion for PLC, mo­tion con­trol and CNC ap­pli­ca­tions, with a broad range of in­ter­faces such as Eth­er­net TCP/IP, RS232 CANopen® for the di­rect con­nec­tion of field­bus ter­mi­nals and drive con­trollers, of­fered as stan­dard con­fig­u­ra­tion.

Ex­C66: The con­troller for the high­er pow­er range

The Ex­C66 mod­el is the stan­dard con­troller for CNC, SPS and mo­tion con­trol ap­pli­ca­tions in the high­er pow­er range. Its tech­ni­cal high­lights in­clude a pow­er­ful mi­cro­con­troller with min­i­mum en­er­gy con­sump­tion, the op­tion of mem­o­ry ex­ten­sion via SC card and in­ter­face ver­sa­til­i­ty (4x CANopen®, USB, RS232C, re­al-time Eth­er­net).

Ex­C66 / H43: SER­COS III for fast, in­te­grat­ed net­work­ing

The Ex­C66 mod­el is al­so avail­able with a SER­COS III in­ter­face. ECK­EL­MANN has thus elect­ed to fo­cus on a fu­ture-ori­ent­ed com­mu­ni­ca­tion sys­tem as a ba­sis for fast and in­te­grat­ed com­mu­ni­ca­tion be­tween con­trols, drives and I/O pe­riph­er­als.

In­dus­tri­al au­toma­tion ben­e­fits from this man­u­fac­tur­er-in­de­pen­dent, re­al-time com­mu­ni­ca­tion so­lu­tion: SER­COS III will in­crease flex­i­bil­i­ty and per­for­mance in ma­chine au­toma­tion. The sup­port of the TCP/IP pro­to­col fa­cil­i­tates the sim­ple de­vel­op­ment of in­te­grat­ed in­for­ma­tion in­fras­truc­tures from field to plan­ning lev­el.

Ex­C66c: The com­pact con­troller

This is a par­tic­u­lar­ly space-sav­ing con­troller, whose op­ti­mised scope of func­tions and in­ter­faces of­fers a favourable price-to-per­for­mance ra­tio. It is used for small and medi­um-sized PLC ap­pli­ca­tions.

PLC, mo­tion con­trol and CNC com­plete so­lu­tion

Equipped with the proven soft­ware li­braries, ExC con­trollers with their ap­pro­pri­ate I/O mod­ules are turned in­to pow­er­ful com­plete so­lu­tions for ma­chine con­trol:

·         ENC (CNC) with NC op­er­at­ing sys­tem, stan­dard HMI for PC and DIN pro­gram­ming – up to 16 ax­es

·         ELC (SPS)with CoDeSys® pro­gram­ming tool in ac­cor­dance with IEC 61131-3  

·         EMC (Mo­tion) with ad­di­tion­al mo­tion li­brary for up to 64 ax­es

Con­trol en­gi­neer­ing, tried and test­ed:

·         Hard­ware in ap­pli­ca­tion-spe­cif­ic per­for­mance class­es, tried and test­ed many times

·         Field­bus and lo­cal bus mod­ules for the fast and safe con­nec­tions of all in­puts and out­puts

·         Sup­port of In­dus­tri­al Eth­er­net (SER­COS III, Ether­CAT®)

TopPrint page

In­dus­tri­al PCs and op­er­a­tor ter­mi­nals which can be adapt­ed to the spe­cif­ic con­di­tions of a ma­chine in terms of per­for­mance and de­sign are the flex­i­ble and open hard­ware plat­form for op­er­at­ing & mon­i­tor­ing in ma­chine au­toma­tion.

In­dus­tri­al PCs: cus­tom op­er­at­ing & mon­i­tor­ing

Panel industrial PC of the FIPC range

Due to its in­dus­try-stan­dard de­sign, the in­dus­tri­al PCs of the FIPC range meet the very high­est de­mands re­gard­ing ro­bust­ness and dura­bil­i­ty. Size, per­for­mance and con­fig­u­ra­tion can be in­di­vid­u­al­ly cho­sen from a wide range of op­tions. This al­lows for op­er­at­ing and mon­i­tor­ing so­lu­tions which are op­ti­mal­ly adapt­ed to the ma­chine’s func­tion­al re­quire­ments and en­vi­ron­ment.

The FIPC’s per­for­mance can eas­i­ly be scaled over time. Al­so, we guar­an­tee con­tin­u­ous fol­low-on prod­ucts for all mod­els. Be­cause of their com­pact di­men­sions, the in­dus­tri­al PCs can be in­stalled in racks, cab­i­nets, switch­boards and swing gates in a space-sav­ing way.

Overview of in­dus­tri­al PC mod­el range

Box industrial PC FIPC 11.11

·         Pan­el-IPC: FIPC 7.x, FIPC 14.x

·         Box-IPC: FIPC 11.4

·         Ex­tend­ed In­dus­try Pan­els: FI­Pan­el 12.x(dis­play unit for re­mote op­er­a­tion from dis­tances of up to 30 m)

All FIPCs can be equipped with cus­tomer-spe­cif­ic com­po­nents such as in­te­grat­ed UPS and bat­tery packs and are avail­able in cus­tomer-spe­cif­ic de­sign.

On a small­er scale: op­er­a­tor ter­mi­nals

An industry terminal of the FIT 3.x range

FIT op­er­a­tor ter­mi­nals with TFT dis­plays and touch screens are avail­able for small­er ma­chines and for com­pact graph­ic con­trol and dis­play pan­els. Pro­tec­tion class, pro­ces­sor per­for­mance, mem­o­ry, dis­play size, in­ter­faces and op­er­at­ing sys­tem can be se­lect­ed de­pend­ing on the cus­tomer’s ap­pli­ca­tion.

·         Op­er­a­tor ter­mi­nals: FIT 3.x, FIT 2.x

The ap­pro­pri­ate op­er­at­ing & mon­i­tor­ing so­lu­tion

·         The right hard­ware plat­form for all tasks re­lat­ed to the op­er­at­ing & mon­i­tor­ing of ma­chines, whether in the form of an IPC or an op­er­a­tor ter­mi­nal.

·         Ex­ten­sive con­fig­u­ra­tion op­tions and the op­tion of cus­tomised adap­ta­tion for ap­pro­pri­ate so­lu­tions.

·         Long-term so­lu­tion safe­ty through sus­tain­able de­sign and ser­vice over the en­tire prod­uct life cy­cle.

·         Us­er in­ter­faces for IPCs and ter­mi­nals in vary­ing de­grees of com­plex­i­ty are cre­at­ed with the vi­su­al­i­sa­tion sys­tem E-TOOLS VIS in a quick and us­er-friend­ly way.