產品 規格：【德國原裝，全新*】
產品 質量：【*，假一罰十】
產品 價格：【薄利多銷，行業zui低】
產品 貨期：【庫存銷售，現買現賣】

：*

；    

： 

廣州鴻懿電氣設備有限公司竭誠為您服務

更多產品和報價咨詢掃二維碼加我

購物需知

1、西門子產品均為密封包裝，外包裝詳見產品圖片，白色標簽上均有西門子品牌LOGO及產品訂貨號，各位買家在收到貨后，請核對型號無誤，再拆包裝

2、本公司銷售的產品一律為（原裝**假一罰十*質保一年） 本公司簽約正式的銷售合同，開具17%的增值稅發票、普通發票。

6SL3210-1PE26-0UL0
西門子產品訂貨號：6SL32101PE260UL0

西門子產品價格：168  RMB

西門子產品凈重：1.100 Kg

西門子產品承諾：質保一年，原裝*

西門子產品尺寸：270.00 x 225.00 x 85.00

概述

SINAMICS G120C, frame sizes FSAA to FSF, with Inligent Operator Panel IOP

SINAMICS G120C compact inverters offer a well-balanced combination of features to address a wide range of applications. They are compact, rugged devices that are easy to operate and can be optionally equipped with a basic or advanced operator panel.

SINAMICS G120C inverters are especially suitable when it comes to meeting the requirements of system integrators, OEMs and distributors regarding high productivity and tailored performance.

優勢

• Compact design
• Side-by-side design
• High power density, low envelope dimensions
• Simple installation in the tightest space
• Low space requirement
• Use in small control cabinets, close to the machine
• Optimized parameter set
• Optimized commissioning
• Getting Started document
• BOP?2 or IOP operator panels can be used
• Integrated USB connection
• Simple and fast software parameter assignment
• Simple to use during commissioning and in operation
• Minimized training costs, existing SINAMICS know-how can be used
• High degree of service friendliness, simple maintenance
• Plug-in terminals
• Cloning function using BOP?2, IOP or memory card
• Operating hours counter for "drive on" and "motor on"
• Fast mechanical installation
• Intuitive standard commissioning
• Component of Totally Integrated Automation
• Energy-efficient, sensorless vector control
• Automatic flux reduction with V/f ECO
• Integrated energy saving computer
• Safety Integrated (STO)
• Communications versions with PROFINET / EtherNet/IP, PROFIBUS DP, USS/Modbus RTU
• Coated modules
• Operation up to an ambient temperature of 60 °C (140 °F)

設計

SINAMICS G120C is a compact converter for control cabinet mounting in IP20 degree of protection where the Control Unit (CU) and Power Module (PM) function units are combined in one device.

The compact mechanical design and the high power density allow these devices to be installed in machine control enclosures and control cabinets for maximum space utilization. The SINAMICS G120C compact converter can be butt-mounted directly, without derating at temperatures up to 40 °C (104 °F).

SINAMICS G120C, frame size FSAA with BOP-2

SINAMICS G120C can be integrated into the widest range of applications, either using the integrated digital and analog inputs or via the integrated fieldbus interface (available in USS, Modbus RTU, PROFIBUS, PROFINET / EtherNet/IP versions). Especially the product versions with integrated PROFIBUS/PROFINET interface make full integration into the Siemens TIA family possible, therefore allowing the advantages of the seamless TIA product family to be fully utilized. SINAMICS G120C devices are preset in the factory so that they can be immediay connected to PROFIBUS and/or PROFINET fieldbus systems without parameterization.

SINAMICS G120C is also equipped with the safety function STO (Safe Torque Off) as standard, which is used to safely stop drives. As a consequence, machine manufacturers can simply comply with current machinery directives with minimum associated costs.

SINAMICS G120C can control asynchronous (induction) motors in the power range from 0.37 kW up to 132 kW (0.5 hp to 200 hp). Reliable and efficient motor operation is achieved by using state-of-the-art IGBT technology combined with vector control. The extensive range of functions integrated in the SINAMICS G120C also offers a high degree of protection for the converter and motor.

Line-side components

Line reactors

Line reactors smooth the current drawn by the converter and thus reduce harmonic components in the line current. Through the reduction of the current harmonics, the thermal load on the power components in the rectifier and in the DC-link capacitors is reduced as well as the harmonic effects on the supply. The use of a line reactor increases the service life of the converter.

Recommended line-side power components

Standard fuses can be used for the SINAMICS G120C. These must be dimensioned to comply with local regulations. In this chapter, you will find recommended components such as fuses and circuit breakers in compliance with IEC and UL regulations.

DC link components

Braking resistors

Excess energy in the DC link is dissipated in the braking resistor. The braking resistors are designed for use with the SINAMICS G120C. This has an integrated braking chopper (electronic switch).

Load-side power components

Output reactors

Output reactors reduce the rate of voltage rise (dv/dt) and the height of the current peaks, and enable longer motor cables to be connected.

Supplementary system components

Inligent Operator Panel IOP

Graphics-based, user-friendly and powerful operator panel for commissioning and diagnostics as well as local operator control and monitoring of SINAMICS G120C.

Basic Operator Panel BOP-2

A 2-line display to provide support when commissioning and troubleshooting the drive. The drive can be locally controlled.

Memory card

The parameter settings for an inverter can be stored on the SINAMICS SD memory card. When service is required, e.g. after the inverter has been replaced and the data have been downloaded from the memory card the drive system is immediay ready for use again. The associated memory card holder is integrated in the inverter.

PC inverter connection kit 2

For controlling and commissioning an inverter directly from a PC if the STARTER commissioning tool or SINAMICS Startdrive has been installed on the PC.

Spare parts

Shield plates

A set of shield plates is included in the scope of delivery for the motor and signal cables corresponding to the frame size of the SINAMICS G120C, and can also be ordered as spare parts.

Spare parts kit

This kit comprises four I/O terminals, one RS485 terminal, two pairs of Control Unit doors (1 × PN and 1 × other communication versions) and one blanking cover.

Set of connectors

A set of connectors for the line feeder cable, braking resistor and motor cable can be ordered corresponding to the frame size of the SINAMICS G120C inverter.

Roof-mounted fan

A roof-mounted fan (at the top of the device) comprising a pre-assembled unit with holder and fan can be ordered corresponding to the frame size of the SINAMICS G120C.

Fan unit

A replacement fan (at the rear of the device; heat sink) comprising a pre-assembled unit with holder and fan can be ordered corresponding to the frame size of the SINAMICS G120C.

集成

Connection example for SINAMICS G120C

USS/Modbus RTU communication interface

PROFIBUS DP communication interface

PROFINET, EtherNet/IP communication interface

6SL3210-1PE26-0UL0
西門子產品訂貨號：6SL32101PE260UL0

西門子產品價格：168  RMB

西門子產品凈重：1.100 Kg

西門子產品承諾：質保一年，原裝*

西門子產品尺寸：270.00 x 225.00 x 85.00

PM240, PM240?2 and PM250 Power Modules

西門子產品訂貨號：6SL32101PE260UL0

西門子產品價格：168  RMB

西門子產品凈重：1.100 Kg

西門子產品承諾：質保一年，原裝*

西門子產品尺寸：270.00 x 225.00 x 85.00

S7系列PLC操作系統更新方法

描述：

更新操作系統時，應當始終更新為相關訂貨號產品可用的版本。以前版本的操作系統可作為備份，以允許用戶恢復到zui初的版本，盡管迄今為止還未發現有這樣做的必要。
CPU 操作系統的版本適用于該訂貨號的所有版本。

用戶可以通過微存儲卡執行更新或者在線更新:

1. 微存儲卡：

創建操作系統更新卡的前提條件：

· 存儲容量為 4 MB (訂貨號 6ES7953-8LM20-0AA0)
或更高的微存儲卡

· STEP 7 V5.1 + SP2 或更高版本

· 帶有外部 PROM 編程器 (6ES7 792-0AA00-0XA0) 的 PC 或
帶有適配器(6ES7 798-0BA00-0XA0)的 PG720/740 或
FieldPG/PowerPG，用于編程微存儲卡

使用 STEP7 創建操作系統更新卡的步驟：

1.             下載所需的 CPU 文件。

2.             雙擊文件名解壓縮文件

3.             在 SIMATIC Manager 中執行“File/S7 Memory Card/Delete”命令，刪除微存儲卡。

4.             在 SIMATIC Manager 中選擇“PLC/Update Operating System”編程操作系統，然后選擇目標目錄并打開 CPU_HD.UPD 文件啟動編程過程。

5.             當屏幕上出現“The firmware update for the module with order number 6ES7 315-2EH13-0AB0 was transferred successfully to the S7 memory card” (訂貨號為 6ES7 315-2EH13-0AB0 的模塊的固件更新內容已經成功傳送至 S7 存儲卡) 提示消息時，操作系統更新卡的編程即告完成。

執行操作系統更新：

1.             切斷 CPU 所在機架的電源 (PS)

2.             將 PLC 從通信網絡斷開

3.             將準備好的操作系統更新卡插入 CPU 中

4.             接通 CPU 所在機架的電源 (PS)

5.             操作系統將從微存儲卡傳送到 CPU 內部閃存 EPROM。傳送期間 CPU 的所有 LED (FRCE、RUN、STOP、SF、BF) 都將點亮。

6.             大約 2 分鐘后，操作系統更新完成。此時 CPU 上的 STOP LED 慢速閃爍 => 請求系統存儲器復位。

7.             切斷電源并插入操作所需的微存儲卡。

8.             接通電源。CPU 自動執行一次總復位，然后立即轉為操作就緒狀態。

9.             將 PLC 重新接入通信網絡之前，必須進行時鐘同步。

2.在線更新：

前提條件：

· 使用 STEP 7 V5.3 及更高版本可以在線更新固件。

· 待更新的模塊所在的站必須能夠在線訪問。

· 必須將一個 MMC 插入模塊

· 編程設備 (PG 或 PC) 的文件系統上必須含有固件版本的文件。
一個文件夾中只能包含一個固件版本的文件。

執行固件更新：

1.             啟動 STEP 7 并切換到 HW-Config。

2.             打開待更新的 CPU 所在的站。

3.             選擇 CPU。

4.             選擇菜單項“Target system > Firmware update”。只有當所選的 CPU 支持“Firmware update”功能時，該菜單項才可用。

5.             在打開的菜單項“Firmware update”中，使用“Search”按鈕選擇固件更新文件 (*.UPD) 的路徑。

6.             選定一個文件之后，將會在“Firmware update”對話框的下半部分提示該文件適合哪些模塊，以及從哪個固件版本開始可以使用該文件。

7.             點擊“Execute”按鈕。STEP 7 將檢查模塊是否可以解析所選的文件 — 如果結果是肯定的 — 則將文件裝載到 CPU。如果為此需要更改 CPU 的運行模式，則系統會要求用戶執行此更改操作。然后 CPU 將自行更新固件。

8.             通過 STEP 7 檢查 (讀 CPU 診斷緩沖區) CPU 是否使用新的固件成功啟動。

請注意：

當 CPU 執行完一次總復位之后，下列值將保留：

· MPI 接口的參數 (MPI 地址和zui高的 MPI 地址)

· CPU 的 IP 地址

· 子網掩碼

· 靜態 SNMP 參數