產品 規格：【德國原裝，全新*】
產品 質量：【*，假一罰十】
產品 價格：【薄利多銷，行業zui低】
產品 貨期：【庫存銷售，現買現賣】

：*

；    

： 

廣州鴻懿電氣設備有限公司竭誠為您服務

更多產品和報價咨詢掃二維碼加我

購物需知

1、西門子產品均為密封包裝，外包裝詳見產品圖片，白色標簽上均有西門子品牌LOGO及產品訂貨號，各位買家在收到貨后，請核對型號無誤，再拆包裝

2、本公司銷售的產品一律為（原裝**假一罰十*質保一年） 本公司簽約正式的銷售合同，開具17%的增值稅發票、普通發票。

6SL3210-1PB15-5UL0
西門子產品訂貨號：6SL32101PB155UL0

西門子產品價格：168  RMB

西門子產品凈重：1.100 Kg

西門子產品承諾：質保一年，原裝*

西門子產品尺寸：270.00 x 225.00 x 85.00

概述

SINAMICS G120C, frame sizes FSAA to FSF, with Inligent Operator Panel IOP

SINAMICS G120C compact inverters offer a well-balanced combination of features to address a wide range of applications. They are compact, rugged devices that are easy to operate and can be optionally equipped with a basic or advanced operator panel.

SINAMICS G120C inverters are especially suitable when it comes to meeting the requirements of system integrators, OEMs and distributors regarding high productivity and tailored performance.

優勢

• Compact design
• Side-by-side design
• High power density, low envelope dimensions
• Simple installation in the tightest space
• Low space requirement
• Use in small control cabinets, close to the machine
• Optimized parameter set
• Optimized commissioning
• Getting Started document
• BOP?2 or IOP operator panels can be used
• Integrated USB connection
• Simple and fast software parameter assignment
• Simple to use during commissioning and in operation
• Minimized training costs, existing SINAMICS know-how can be used
• High degree of service friendliness, simple maintenance
• Plug-in terminals
• Cloning function using BOP?2, IOP or memory card
• Operating hours counter for "drive on" and "motor on"
• Fast mechanical installation
• Intuitive standard commissioning
• Component of Totally Integrated Automation
• Energy-efficient, sensorless vector control
• Automatic flux reduction with V/f ECO
• Integrated energy saving computer
• Safety Integrated (STO)
• Communications versions with PROFINET / EtherNet/IP, PROFIBUS DP, USS/Modbus RTU
• Coated modules
• Operation up to an ambient temperature of 60 °C (140 °F)

設計

SINAMICS G120C is a compact converter for control cabinet mounting in IP20 degree of protection where the Control Unit (CU) and Power Module (PM) function units are combined in one device.

The compact mechanical design and the high power density allow these devices to be installed in machine control enclosures and control cabinets for maximum space utilization. The SINAMICS G120C compact converter can be butt-mounted directly, without derating at temperatures up to 40 °C (104 °F).

SINAMICS G120C, frame size FSAA with BOP-2

SINAMICS G120C can be integrated into the widest range of applications, either using the integrated digital and analog inputs or via the integrated fieldbus interface (available in USS, Modbus RTU, PROFIBUS, PROFINET / EtherNet/IP versions). Especially the product versions with integrated PROFIBUS/PROFINET interface make full integration into the Siemens TIA family possible, therefore allowing the advantages of the seamless TIA product family to be fully utilized. SINAMICS G120C devices are preset in the factory so that they can be immediay connected to PROFIBUS and/or PROFINET fieldbus systems without parameterization.

SINAMICS G120C is also equipped with the safety function STO (Safe Torque Off) as standard, which is used to safely stop drives. As a consequence, machine manufacturers can simply comply with current machinery directives with minimum associated costs.

SINAMICS G120C can control asynchronous (induction) motors in the power range from 0.37 kW up to 132 kW (0.5 hp to 200 hp). Reliable and efficient motor operation is achieved by using state-of-the-art IGBT technology combined with vector control. The extensive range of functions integrated in the SINAMICS G120C also offers a high degree of protection for the converter and motor.

Line-side components

Line reactors

Line reactors smooth the current drawn by the converter and thus reduce harmonic components in the line current. Through the reduction of the current harmonics, the thermal load on the power components in the rectifier and in the DC-link capacitors is reduced as well as the harmonic effects on the supply. The use of a line reactor increases the service life of the converter.

Recommended line-side power components

Standard fuses can be used for the SINAMICS G120C. These must be dimensioned to comply with local regulations. In this chapter, you will find recommended components such as fuses and circuit breakers in compliance with IEC and UL regulations.

DC link components

Braking resistors

Excess energy in the DC link is dissipated in the braking resistor. The braking resistors are designed for use with the SINAMICS G120C. This has an integrated braking chopper (electronic switch).

Load-side power components

Output reactors

Output reactors reduce the rate of voltage rise (dv/dt) and the height of the current peaks, and enable longer motor cables to be connected.

Supplementary system components

Inligent Operator Panel IOP

Graphics-based, user-friendly and powerful operator panel for commissioning and diagnostics as well as local operator control and monitoring of SINAMICS G120C.

Basic Operator Panel BOP-2

A 2-line display to provide support when commissioning and troubleshooting the drive. The drive can be locally controlled.

Memory card

The parameter settings for an inverter can be stored on the SINAMICS SD memory card. When service is required, e.g. after the inverter has been replaced and the data have been downloaded from the memory card the drive system is immediay ready for use again. The associated memory card holder is integrated in the inverter.

PC inverter connection kit 2

For controlling and commissioning an inverter directly from a PC if the STARTER commissioning tool or SINAMICS Startdrive has been installed on the PC.

Spare parts

Shield plates

A set of shield plates is included in the scope of delivery for the motor and signal cables corresponding to the frame size of the SINAMICS G120C, and can also be ordered as spare parts.

Spare parts kit

This kit comprises four I/O terminals, one RS485 terminal, two pairs of Control Unit doors (1 × PN and 1 × other communication versions) and one blanking cover.

Set of connectors

A set of connectors for the line feeder cable, braking resistor and motor cable can be ordered corresponding to the frame size of the SINAMICS G120C inverter.

Roof-mounted fan

A roof-mounted fan (at the top of the device) comprising a pre-assembled unit with holder and fan can be ordered corresponding to the frame size of the SINAMICS G120C.

Fan unit

A replacement fan (at the rear of the device; heat sink) comprising a pre-assembled unit with holder and fan can be ordered corresponding to the frame size of the SINAMICS G120C.

集成

Connection example for SINAMICS G120C

USS/Modbus RTU communication interface

PROFIBUS DP communication interface

PROFINET, EtherNet/IP communication interface

6SL3210-1PB15-5UL0
西門子產品訂貨號：6SL32101PB155UL0

西門子產品價格：168  RMB

西門子產品凈重：1.100 Kg

西門子產品承諾：質保一年，原裝*

西門子產品尺寸：270.00 x 225.00 x 85.00

PM240, PM240?2 and PM250 Power Modules

西門子產品訂貨號：6SL32101PB155UL0

西門子產品價格：168  RMB

西門子產品凈重：1.100 Kg

西門子產品承諾：質保一年，原裝*

西門子產品尺寸：270.00 x 225.00 x 85.00

PLC在拉力試驗系統中的應用

　　1引言

　　為了煤礦生產的安全性，用于煤礦斜井提升設備中的絞車底盤及三環鏈等設備，均需要進行檢驗，通過后方可允許批量生產和使用。而傳統的檢驗設備，無論在控制方式上，還是在檢驗手段上，均較落后，檢驗效率較低，而且設備的故障率也較高。因此，現有檢驗設備的改造問題，是目前國內各個檢驗中心急需進行的主要任務之一。

　　2檢驗原理及硬件系統設計

　　用于煤礦斜井提升的絞車、三環鏈等設備。在批量生產前，必須到的檢驗中心進行性能指標的檢測，主要測試其抗拉強度等性能指標，測出其zui小拉斷拉力，并與其承載量相對應的國家規定標準進行比較。當其zui小拉斷拉力大于標準所規定的允許抗拉強度時，則可判定該產品的抗拉強度滿足要求。

　　對上述設備進行檢驗的PLC控制系統的組成框圖如圖1所示，由觸摸屏、PLC傳感器、控制按鈕、控制設備及運行狀態指示等部分組成。

　　觸摸屏主要用于完成被檢設備的信息輸人、設備的啟?？刂?、測得的拉力數值的顯示輸出以及其他相關信息的輸出;傳感器將測得的拉力信號經A/D轉換后送入PLC，在PLC內部進行相應的運算后，送到觸摸屏進行顯示;PLC是控制系統的核心，主要用于接收觸摸屏輸人的相關信息及控制指令，輸出相應的控制命令，同時經A/D轉換器讀取拉力傳感器測得的數據。本系統中PLC選用松下電工的F印型PLC，觸摸屏選用GT一10型單色顯示觸摸屏。PLC的資源分配如表1所示。

3軟件設計

　　控制程序流程圖如圖2所示。其中對拉力值的處理是主要應注意的問題。PLC讀取測得的拉力值，在試驗過程中，拉力值將逐漸增加，當拉斷的瞬間，拉力值將立即減小。根據這個拉力值的變化，PLC可判斷試件是否拉斷。因此，PLC在每次讀取測得的拉力后，應將拉力值保存在一個特定的單元內，下一次讀取的值與所存的值進行比較。如果當前值小于存儲值，則可斷定試件已拉斷，存儲值為拉斷拉力。若當前值大于存儲值，則用當前值替換存儲值，并進行下一次檢測，直到拉斷為止。系統拉力檢測梯形圖如圖3所示。其中DTloo為經A/D轉換后所得的拉力數值，D功單元用于存儲暫存數值，DTloo單元用于存儲拉斷拉力值。