產品 規格：【德國原裝，全新*】
產品 質量：【*，假一罰十】
產品 價格：【薄利多銷，行業zui低】
產品 貨期：【庫存銷售，現買現賣】

：*

；    

： 

廣州鴻懿電氣設備有限公司竭誠為您服務

更多產品和報價咨詢掃二維碼加我

購物需知

1、西門子產品均為密封包裝，外包裝詳見產品圖片，白色標簽上均有西門子品牌LOGO及產品訂貨號，各位買家在收到貨后，請核對型號無誤，再拆包裝

2、本公司銷售的產品一律為（原裝**假一罰十*質保一年） 本公司簽約正式的銷售合同，開具17%的增值稅發票、普通發票。

6SL3224-0BE35-5UA0
西門子產品訂貨號：6SL32240BE355UA0

西門子產品價格：168  RMB

西門子產品凈重：1.100 Kg

西門子產品承諾：質保一年，原裝*

西門子產品尺寸：270.00 x 225.00 x 85.00

概述

SINAMICS G120C, frame sizes FSAA to FSF, with Inligent Operator Panel IOP

SINAMICS G120C compact inverters offer a well-balanced combination of features to address a wide range of applications. They are compact, rugged devices that are easy to operate and can be optionally equipped with a basic or advanced operator panel.

SINAMICS G120C inverters are especially suitable when it comes to meeting the requirements of system integrators, OEMs and distributors regarding high productivity and tailored performance.

優勢

• Compact design
• Side-by-side design
• High power density, low envelope dimensions
• Simple installation in the tightest space
• Low space requirement
• Use in small control cabinets, close to the machine
• Optimized parameter set
• Optimized commissioning
• Getting Started document
• BOP?2 or IOP operator panels can be used
• Integrated USB connection
• Simple and fast software parameter assignment
• Simple to use during commissioning and in operation
• Minimized training costs, existing SINAMICS know-how can be used
• High degree of service friendliness, simple maintenance
• Plug-in terminals
• Cloning function using BOP?2, IOP or memory card
• Operating hours counter for "drive on" and "motor on"
• Fast mechanical installation
• Intuitive standard commissioning
• Component of Totally Integrated Automation
• Energy-efficient, sensorless vector control
• Automatic flux reduction with V/f ECO
• Integrated energy saving computer
• Safety Integrated (STO)
• Communications versions with PROFINET / EtherNet/IP, PROFIBUS DP, USS/Modbus RTU
• Coated modules
• Operation up to an ambient temperature of 60 °C (140 °F)

設計

SINAMICS G120C is a compact converter for control cabinet mounting in IP20 degree of protection where the Control Unit (CU) and Power Module (PM) function units are combined in one device.

The compact mechanical design and the high power density allow these devices to be installed in machine control enclosures and control cabinets for maximum space utilization. The SINAMICS G120C compact converter can be butt-mounted directly, without derating at temperatures up to 40 °C (104 °F).

SINAMICS G120C, frame size FSAA with BOP-2

SINAMICS G120C can be integrated into the widest range of applications, either using the integrated digital and analog inputs or via the integrated fieldbus interface (available in USS, Modbus RTU, PROFIBUS, PROFINET / EtherNet/IP versions). Especially the product versions with integrated PROFIBUS/PROFINET interface make full integration into the Siemens TIA family possible, therefore allowing the advantages of the seamless TIA product family to be fully utilized. SINAMICS G120C devices are preset in the factory so that they can be immediay connected to PROFIBUS and/or PROFINET fieldbus systems without parameterization.

SINAMICS G120C is also equipped with the safety function STO (Safe Torque Off) as standard, which is used to safely stop drives. As a consequence, machine manufacturers can simply comply with current machinery directives with minimum associated costs.

SINAMICS G120C can control asynchronous (induction) motors in the power range from 0.37 kW up to 132 kW (0.5 hp to 200 hp). Reliable and efficient motor operation is achieved by using state-of-the-art IGBT technology combined with vector control. The extensive range of functions integrated in the SINAMICS G120C also offers a high degree of protection for the converter and motor.

Line-side components

Line reactors

Line reactors smooth the current drawn by the converter and thus reduce harmonic components in the line current. Through the reduction of the current harmonics, the thermal load on the power components in the rectifier and in the DC-link capacitors is reduced as well as the harmonic effects on the supply. The use of a line reactor increases the service life of the converter.

Recommended line-side power components

Standard fuses can be used for the SINAMICS G120C. These must be dimensioned to comply with local regulations. In this chapter, you will find recommended components such as fuses and circuit breakers in compliance with IEC and UL regulations.

DC link components

Braking resistors

Excess energy in the DC link is dissipated in the braking resistor. The braking resistors are designed for use with the SINAMICS G120C. This has an integrated braking chopper (electronic switch).

Load-side power components

Output reactors

Output reactors reduce the rate of voltage rise (dv/dt) and the height of the current peaks, and enable longer motor cables to be connected.

Supplementary system components

Inligent Operator Panel IOP

Graphics-based, user-friendly and powerful operator panel for commissioning and diagnostics as well as local operator control and monitoring of SINAMICS G120C.

Basic Operator Panel BOP-2

A 2-line display to provide support when commissioning and troubleshooting the drive. The drive can be locally controlled.

Memory card

The parameter settings for an inverter can be stored on the SINAMICS SD memory card. When service is required, e.g. after the inverter has been replaced and the data have been downloaded from the memory card the drive system is immediay ready for use again. The associated memory card holder is integrated in the inverter.

PC inverter connection kit 2

For controlling and commissioning an inverter directly from a PC if the STARTER commissioning tool or SINAMICS Startdrive has been installed on the PC.

Spare parts

Shield plates

A set of shield plates is included in the scope of delivery for the motor and signal cables corresponding to the frame size of the SINAMICS G120C, and can also be ordered as spare parts.

Spare parts kit

This kit comprises four I/O terminals, one RS485 terminal, two pairs of Control Unit doors (1 × PN and 1 × other communication versions) and one blanking cover.

Set of connectors

A set of connectors for the line feeder cable, braking resistor and motor cable can be ordered corresponding to the frame size of the SINAMICS G120C inverter.

Roof-mounted fan

A roof-mounted fan (at the top of the device) comprising a pre-assembled unit with holder and fan can be ordered corresponding to the frame size of the SINAMICS G120C.

Fan unit

A replacement fan (at the rear of the device; heat sink) comprising a pre-assembled unit with holder and fan can be ordered corresponding to the frame size of the SINAMICS G120C.

集成

Connection example for SINAMICS G120C

USS/Modbus RTU communication interface

PROFIBUS DP communication interface

PROFINET, EtherNet/IP communication interface

6SL3224-0BE35-5UA0
西門子產品訂貨號：6SL32240BE355UA0

西門子產品價格：168  RMB

西門子產品凈重：1.100 Kg

西門子產品承諾：質保一年，原裝*

西門子產品尺寸：270.00 x 225.00 x 85.00

PM240, PM240?2 and PM250 Power Modules

西門子產品訂貨號：6SL32240BE355UA0

西門子產品價格：168  RMB

西門子產品凈重：1.100 Kg

西門子產品承諾：質保一年，原裝*

西門子產品尺寸：270.00 x 225.00 x 85.00

廣州鴻懿電氣設備有限公司西門子工控產品銷售區域：

直轄市:北京_重慶_天津_上海

1.河北:_石家莊_唐山_秦皇島_邯鄲_邢臺保定_張家口_承德_滄州_廊坊_衡水

2.山西:_太原_大同_陽泉_長治_晉城_朔州_晉中_運城_忻州_臨汾_呂梁

3.內蒙古:_呼和浩特_包頭_烏海_赤峰_通遼_鄂爾多斯_呼倫貝爾_巴彥淖爾盟_興安盟_錫林郭勒盟和滿洲里_阿拉善盟 _烏蘭察布盟_二連浩特

4.遼寧:_沈陽_大連_鞍山_撫順_本溪_丹東_錦州_營口_阜新_遼陽_盤錦_鐵嶺_朝陽_葫蘆島

5.吉林:_長春_吉林_四平_遼源_通化_白山_松原_白城_延邊朝鮮族自治州

6.黑龍江:_哈爾濱_齊齊哈爾_雞西_鶴崗_雙鴨山_大慶_伊春_佳木斯_七臺河_牡丹江_黑河_綏化_大興安嶺

7.江蘇:_南京_無錫_徐州_常州_蘇州_南通_連云港_淮安_鹽城_揚州_鎮江_泰州_宿遷

8.浙江:_杭州_寧波_溫州_嘉興_湖州_紹興_金華_衢州_舟山_臺州_麗水

9.安徽:_合肥_蕪湖_蚌埠_淮南_馬鞍山_淮北_銅陵_安慶_黃山_滁州_阜陽_宿州_巢湖_六安_亳州_池州_宣城

10.福建:_福州_廈門_莆田_三明_泉州_漳州_南平_龍巖_寧德

11.江西:_南昌_景德鎮_萍鄉_九江_新余_鷹潭_贛州_吉安_宜春_撫州_上饒

12.山東：_濟南_青島_淄博_棗莊_東營_煙臺_濰坊_威海_濟寧_泰安_日照_萊蕪_臨沂_德州_聊城_濱州_菏澤

13.河南：_鄭州_開封_洛陽_平頂山_焦作_鶴壁_新鄉_安陽_濮陽_許昌_漯河_三門峽_南陽_商丘_信陽_周口_駐馬店

14.湖北：_武漢_黃石_襄陽_十堰_荊州_宜昌_荊門_鄂州_孝感_黃岡_咸寧_隨州_恩施州

15.湖南:_長沙_株洲_湘潭_衡陽_邵陽_岳陽_常德_張家界_益陽_郴州_永州_懷化_婁底_湘西州

16.廣東:_廣州_深圳_珠海_汕頭_韶關_佛山_江門_湛江_茂名_肇慶_惠州_梅州_汕尾_河源_陽江_清遠_東莞_中山_潮州_揭陽_云浮

17.廣西:_南寧_柳州_桂林_梧州_北海_防城港_欽州_貴港_玉林_百色_賀州_河池_來賓_崇左

18.海南:_海口_三亞_白沙黎族自治縣_昌江黎族自治縣_樂東黎族自治縣_陵水黎族自治縣_保亭黎族苗族自治縣_瓊中黎族苗族自治縣_西沙群島_南沙群島_中沙群島_五指山_瓊海_儋州_文昌_萬寧_東方_定安縣_屯昌縣_澄邁縣_臨高縣

19.四川:_成都_自貢_攀枝花_瀘州_德陽_綿陽_廣元_遂寧_內江_樂山_南充_宜賓_廣安_達州_眉山_雅安_巴中_資陽_阿壩州_甘孜州_涼山州

20.貴州:_貴陽_六盤水_遵義_安順_銅仁_畢節_黔西南州_黔東南州_黔南州

21.云南：_昆明_曲靖_玉溪_保山_昭通_麗江_普洱_臨滄_*州_紅河州_西雙版納_楚雄州_大理_德宏州_怒江州_迪慶州_思茅

22.西藏:_拉薩_昌都_山南_日喀則_那曲_阿里_林芝

23.陜西：_西安_銅川_寶雞_咸陽_渭南_延安_漢中_榆林_安康_商洛

24.甘肅:_蘭州_嘉峪關_金昌_白銀_天水_武威_張掖_平涼_酒泉_慶陽_定西_隴南_臨夏州_甘南州

25.青海:_西_寧海_東海_北州_黃南州_海南州_果洛州_玉樹州_海西州

26:寧夏:_銀川_石嘴山_吳忠_固原_中衛

27.新疆：_烏魯木齊_克拉瑪依_吐魯番_哈密_昌吉州_博爾塔拉州_巴音郭楞州_阿克蘇_克孜勒蘇州_喀什_和田_伊犁州