中国xxxx真实偷拍,波罗野结衣被躁57分钟,公交车上忘穿内裤被c好爽

VMC 1100, a new generation 7-inch vehicle mount computer with dual core Intel^® Atom™ processor, is designed for transportation applications requiring real-time vehicle tracking. Adopting the latest low power consumption processor and integrating a WVGA LCD with a brightness of 400nits and a 4-wire resistive touch sensor, VMC 1100 does not compromise with its space to sacrifice its functional features. It provides dual CANbus, RS-232, RS-485, USB 3.0, GPIO, analog input, PWM and LAN signal. For security, VMC 1100 supports real-time vehicle tracking through GPS and SMS/GSM/GPRS. VMC 1100 can also be upgraded to a different LCD resolution and include other features such as LTE, projected capacitive touch, CANbus protocol support and backup battery.

General	Cooling System: FanlessEnclosure: Plastic PC + ABS with aluminum die casting heatsinkMounting: Support VESA 75, stａnd mountingFour SMA Type antenna connectors of BT/Wi-Fi/WWAN/GPSPower Input: 9 ~ 36VDC input with IgnitionPower Consumption: 26WIngress Protection: Front panel IP54Dimension: 213mm (W) x 145mm (H) x 50mm (D)(8.3" x 5.7" x 1.9")Weight: TBD
LCD Panel	7-inch TFT LCD Panel with LED Backlight800 x 480 pixels (WVGA)Brightness: 400 cd/m2 (typical)Contrast ratio: 600:1 (typical)
Touch Screen Sensor	4-wire resistant touchAnti-glare coating surfaceTransmission rate: 78 ± 3%
CPU & Chipset	Intel® Atom™ Dual Core E3825 1.33GHz
Memory	One 204-pin DDR3L 1600MHz SO-DIMM slot (up to 4GB) - Default 2GB
Expandable Storage	1 x SATAIII SATA DOM Slot (available option 16G and 32G)
Expansion	1 x Half mini-PCIe socket (PCIe + USB) for WLAN option1 x mini-PCIe socket ((USB + UART) for WWAN option)1 x External module for OBD/Battery module option(UART + USB)
I/O Interface-Front	F1 ~ F5 functions keyLight SensorInternal Mic-in2 x Built-in 2W speakers3 x LED indicators (Power mode, Storage and WWAN status)
I/O Interface-Lateral	Right side - 1 x Micro SD card socket - 1 x SIM card socket - 1 x USB 3.0 host type A connector - 1 x Mic-in, Line-outLeft side - 1 x Power button - 1 x System reset button - Volume up/down or Brightness up/dow
I/O Interface-Rear	1 x 5-pin Circular connector for Power/Ignition input1 x RJ45 for LAN1 x RJ45 for Full RS-232 with 0V/5V/12V power supply (0.5A)1 x DB9 (Male) for - RX/TX or RS-485 - 2 x CAN Bus 2.01 x DB15 (Female) for - GPS dead reckoning interface (optional) - 2 x PWM, 2 x Analog Input, 3 x GPO, 3 x GPI Analog Input requirement for Voltages are measured Channel: 8 Voltage range: 0 ~ 38V Resolution: 8 bit Analog Input requirement for Frequency, Speed Square wave Frequency signal offset voltage range: 0 ~ 15VDC Protection: +/- 500V spike Frequency signal duty cycle range: 10% ~ 90%
Communication Module	1 x On board GPS module1 x WLAN or Bluetooth module for optional1 x WWAN module for optional
Power Management	Selectable boot-up & shut-down voltage for low power protectionHW design ready for 8-level delay time on/off at user's self configurationPower on/off ignition, software detectableSupport S3 and S4 suspend mode; wake on RTC and SMS
Operating System	Windows 8 Professional, WES8Windows 7, WES7Linux Fedora (kernel V3.2.0)
Environment	Operating temperatures: Ambient with air -20°C to 60°CStorage temperatures: -30°C to 80°CRelative humidity: 10% to 95% (non-condensing)Vibration (random): 3g @5 ~ 500HzVibration Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4 Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24Shock Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers=20g Crash hazard: MIL-STD-810G, Method 516.6, Procedure V, ground equipment=75g
Power Design & Protection	Load dump and inductive load protection Cold cranking protection Transient voltage protection Electrostatic discharge protection
Standards/Certifications	EMC - CE, FCC class BPower - SAE J1113 - SAE J1455 - ISO 7637-2Safety - EN 60950-1 LVD