上海朔川電氣設備有限公司

免費會員

您現在的位置：上海朔川電氣設備有限公司>>西門子S7-300>> 西門子6ES73146CH040AB0型號及規格

西門子6ES73146CH040AB0型號及規格

參考價:	面議

參考價:

面議

具體成交價以合同協議為準

產品型號
品牌
經銷商 廠商性質
上海市 所在地

訪問次數：280更新時間：2017-10-18 16:21:56

在線詢價加入對比查看聯系方式

聯系我們時請說明是智能制造網上看到的信息，謝謝!

分享

西門子S7-300

上海朔川電氣設備有限公司

免費會員·9年

聯系人：: 吉夢琪

在線咨詢給我留言

掃一掃訪問手機商鋪

產品簡介

西門子6ES73146CH040AB0型號及規格

產品介紹

西門子6ES73146CH040AB0型號及規格西門子6ES73146CH040AB0型號及規格

6ES7314-6CH04-0AB0

SIMATIC S7-300,CPU 314C-2 DP 緊湊型 CPU mit MPI, 24 DE/16 DA,4AE,2AA,1 Pt100, 4 schnelle 計數器(60 kHz), integrierte DP 接口, integr. 電源 DC 24V, 工作存儲器 192 KByte, 前連接器(2x 40極)和微型存儲卡需要

公司名稱：上海朔川電氣設備有限公司
聯系人：吉夢琪
：
地址：上海市金山區涇波路129號
：2840735331

CPU 314C-2 DP

訂貨數據
附件
產品信息
組態工具

跳轉到

概述

應用

設計

功能

技術規范

概述

帶集成數字量和模擬量輸入/輸出和PROFIBUS DP主站/從站接口的緊湊型CPU
帶技術功能
滿足工廠對高處理性能和相應時間的要求
用于連接分布式 I/O

CPU 運行需要 SIMATIC 微存儲卡 (MMC)。

應用

CPU 314C-2 DP 是緊湊型 CPU，可用于具有分布式結構的系統。通過其擴展工作存儲器，該緊湊型CPU也適用于中等規模的應用。集成數字量和模擬量 I/O，支持與過程的直接連接；PROFIBUS DP 主站/從站接口支持與分布式 I/O 的連接。因此，CPU 314C-2 DP 既可以用作分布式單元進行快速預處理，也可以用作帶下位現場總線系統的上位控制器。

集成技術工程的其他用途包括：

計數
頻率測量
周期測量
脈寬調制
PID 控制
定位控制

設計

CPU 314C-2 DP 安裝有：

微處理器;
處理器處理每條二進制指令的時間可達 60 ns。
擴展存儲器;
192 KB 高速工作存儲器（相當于約 64 K 指令），用于程序段執行，可以為用戶程序提供足夠的存儲器空間
SIMATIC 微型存儲卡（zui大 8 MB）作為程序的裝載存儲器，還允許將項目（包括符號和注釋）存儲在 CPU 中。
靈活的擴展能力;
多達 31 個模塊，（4排結構）
MPI多點接口
內置 MPI 接口可以zui多同時建立 12 個與 S7-300/400 或與 PG、PC、OP 的連接。在這些連接中，始終分別為 PG 和 OP 各保留一個連接。通過“全局數據通訊”，MPI可以用來建立zui多16個CPU組成的簡單網絡。
PROFIBUS DP 接口:
帶有 PROFIBUS DP 主/從接口的 CPU 314C-2 DP 可以用來建立高速、易用的分布式自動化系統。對用戶來說,分布式I/O單元可作為一個集中式單元來處理(相同的組態、編址和編程).
內置輸入/輸出；
在 CPU 314C-2 DP 中，提供有 24 路數字量輸入（所有輸入都可用作報警處理），16 路數字量輸出以及 4路模擬量輸入和 2 路模擬量輸出（用于電流/電壓信號），以及 1 路附加輸入（用于測量溫度 (Pt100)），使其可以成為上位控制系統。

功能

口令保護;
用戶程序使用密碼保護，可防止非法訪問。
塊加密；
函數 (FC) 和功能塊 (FB) 可以通過 S7-Block Privacy，加密存儲于 CPU 以保護專有技術。
診斷緩沖;
診斷緩沖區中可存儲zui后 500 條錯誤和中斷事件，其中的 100 條事件可以*存儲。
免維護的數據后備;
如果發生斷電，則可通過 CPU 將所有數據（zui大 64 KB）自動寫入到 SIMATIC 微型存儲卡，且將在再次通電時保持不變。

可參數化的特性

可以使用 STEP 7 對 S7 的組態、屬性以及CPU的響應進行參數設置：

概要：
定義名稱、上位系統名稱和位置名稱
MPI多點接口;
定義站地址
啟動；
定義 CPU 的啟動特性和監視時間
循環/時鐘存儲器；
定義zui大的掃循環描時間和負載設置時鐘存儲器地址
記憶性；
定義具有保持功能的存儲位、計數器、定時器和數據塊的數量
日時鐘中斷；
設定起始日期、起始時間和間隔周期
周期中斷；
周期設定
系統診斷；
確定診斷消息的處理和范圍
時鐘；
設定AS內或MPI上的同步類型
防護等級；
定義程序和數據的訪問權限
通訊；
保留連接源
PROFIBUS DP 主站/從站接口;
針對分布式 I/O 的用戶定義地址分配。對操作模式進行參數化，并組態使用 PROFIBUS DP 時的傳輸區域。對時間同步進行參數化
數字量輸入/輸出
地址設定，輸入繼電器和過程中斷
模擬輸入/輸出
地址設置，對于輸入：溫度單元，測量類型，量程，以及干擾頻率；對于輸出：輸出類型和輸出范圍
集成功能“計數器”
設定地址，以及 “連續計數”“單次計數”“周期計數”“頻率測量”和“脈寬調制”模式下的參數分配
集成功能“定位器”
設定地址，“數字輸出定位”和“模擬輸出定位”參數
集成“規則”功能

顯示功能與信息功能

狀態和故障指示；
發光二極管顯示，例如，硬件、編程、定時器或I/O出錯以及運行模式，如RUN、STOP、Startup。
測試功能；
可使用編程器顯示程序執行過程中的信號狀態，可以不通過用戶程序而修改過程變量，以及輸出堆棧內容。
信息功能；
通過編程器以文本形式為用戶提供存儲能力信息、CPU的運行模式，以及主存儲器和裝載存儲器當前的使用情況、當前的循環時間和診斷緩沖區的內容。

集成的通訊功能

編程器/OP 通訊
全局數據通訊
S7 基本通訊
S7 通訊(只是服務器)
路由
數據記錄路由

集成功能

計數器；
4個計數器(zui高60kHz)，具有獨立方向的比較器，可直接連接到24V增量編碼器。
4通道頻率測量；
允許進行頻率測量（高達 60 kHz），例如，測量軸速或吞吐量（每個測量周期內的件數）。
周期測量
4個通道。可測量計數信號的周期時間，計數頻率zui高為 1 KHz。
脈寬調制；
4個輸出可直接連接控制閥、執行器、開關設備、加熱裝置等，例如采樣頻率為 2.5 kHz。可設置周期長度并可在運行時修改占空比。
定位控制
集成在操作系統中的 SFB 可通過 2 個數字量輸出或 1 個模擬量輸出對 1 個軸進行定位控制。
報警輸入（所有數字量輸入）；
報警輸入可以檢測過程事件，并在zui短的時間內觸發響應。

技術規范

Article number		6ES7314-6CH04-0AB0
		CPU314C-2DP, 24DI/16DO/5AI/2AO, 192 KB
General information
Hardware product version		01
Firmware version		V3.3
Engineering with
● Programming package		STEP 7 V5.5 + SP1 or higher or STEP 7 V5.3 + SP2 or higher with HSP 203
Supply voltage
Rated value (DC)
● 24 V DC		Yes
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
external protection for power supply lines (recommendation)		Miniature circuit breaker, type C; min. 2 A; miniature circuit breaker type B, min. 4 A
Mains buffering
● Mains/voltage failure stored energy time		5 ms
● Repeat rate, min.		1 s
Load voltage L+
Digital inputs
— Rated value (DC)		24 V
— Reverse polarity protection		Yes
Digital outputs
— Rated value (DC)		24 V
— Reverse polarity protection		No
Input current
Current consumption (rated value)		880 mA
Current consumption (in no-load operation), typ.		150 mA
Inrush current, typ.		5 A
I²t		0.7 A²·s
Digital inputs
● from load voltage L+ (without load), max.		80 mA
Digital outputs
● from load voltage L+, max.		50 mA
Power loss
Power loss, typ.		13 W
Memory
Work memory
● integrated		192 kbyte
● expandable		No
● Size of retentive memory for retentive data blocks		64 kbyte
Load memory
● Plug-in (MMC)		Yes
● Plug-in (MMC), max.		8 Mbyte
● Data management on MMC (after last programming), min.		10 y
Backup
● present		Yes; Guaranteed by MMC (maintenance-free)
● without battery		Yes; Program and data
CPU processing times
for bit operations, typ.		0.06 µs
for word operations, typ.		0.12 µs
for fixed point arithmetic, typ.		0.16 µs
for floating point arithmetic, typ.		0.59 µs
CPU-blocks
Number of blocks (total)		1 024; (DBs, FCs, FBs); the maximum number of loadable blocks can be reduced by the MMC used.
DB
● Number, max.		1 024; Number range: 1 to 16000
● Size, max.		64 kbyte
FB
● Number, max.		1 024; Number range: 0 to 7999
● Size, max.		64 kbyte
FC
● Number, max.		1 024; Number range: 0 to 7999
● Size, max.		64 kbyte
OB
● Description		see instruction list
● Size, max.		64 kbyte
● Number of free cycle OBs		1; OB 1
● Number of time alarm OBs		1; OB 10
● Number of delay alarm OBs		2; OB 20, 21
● Number of cyclic interrupt OBs		4; OB 32, 33, 34, 35
● Number of process alarm OBs		1; OB 40
● Number of DPV1 alarm OBs		3; OB 55, 56, 57
● Number of startup OBs		1; OB 100
● Number of asynchronous error OBs		5; OB 80, 82, 85, 86, 87
● Number of synchronous error OBs		2; OB 121, 122
Nesting depth
● per priority class		16
● additional within an error OB		4
Counters, timers and their retentivity
S7 counter
● Number		256
Retentivity
— adjustable		Yes
— lower limit		0
— upper limit		255
— preset		Z 0 to Z 7
Counting range
— lower limit		0
— upper limit		999
IEC counter
● Number		Unlimited (limited only by RAM capacity)
S7 times
● Number		256
Retentivity
— adjustable		Yes
— lower limit		0
— upper limit		255
— preset		No retentivity
Time range
— lower limit		10 ms
— upper limit		9 990 s
IEC timer
● present		Yes
● Type		SFB
● Number		Unlimited (limited only by RAM capacity)
Data areas and their retentivity
retentive data area in total		All, max. 64 KB
Flag
● Number, max.		256 byte
● Retentivity available		Yes; MB 0 to MB 255
● Retentivity preset		MB 0 to MB 15
● Number of clock memories		8; 1 memory byte
Data blocks
● Number, max.		1 024; Number range: 1 to 16000
● Size, max.		64 kbyte
● Retentivity adjustable		Yes; via non-retain property on DB
● Retentivity preset		Yes
Local data
● per priority class, max.		32 kbyte; Max. 2048 bytes per block
Address area
I/O address area
● Inputs		2 048 byte
● Outputs		2 048 byte
of which distributed
— Inputs		2 003 byte
— Outputs		2 010 byte
Process image
● Inputs		2 048 byte
● Outputs		2 048 byte
● Inputs, adjustable		2 048 byte
● Outputs, adjustable		2 048 byte
● Inputs, default		128 byte
● Outputs, default		128 byte
Default addresses of the integrated channels
— Digital inputs		124.0 to 126.7
— Digital outputs		124.0 to 125.7
— Analog inputs		752 to 761
— Analog outputs		752 to 755
Digital channels
● Inputs		16 048
— of which central		1 016
● Outputs		16 096
— of which central		1 008
Analog channels
● Inputs		1 006
— of which central		253
● Outputs		1 007
— of which central		250
Hardware configuration
Number of expansion units, max.		3
Number of DP masters
● integrated		1
● via CP		4
Number of operable FMs and CPs (recommended)
● FM		8
● CP, PtP		8
● CP, LAN		10
Rack
● Racks, max.		4
● Modules per rack, max.		8; In rack 3 max. 7
Time of day
Clock
● Hardware clock (real-time)		Yes
● retentive and synchronizable		Yes
● Backup time		6 wk; At 40 °C ambient temperature
● Deviation per day, max.		10 s; Typ.: 2 s
● Behavior of the clock following POWER-ON		Clock continues running after POWER OFF
● Behavior of the clock following expiry of backup period		Clock continues to run with the time at which the power failure occurred
Operating hours counter
● Number		1
● Number/Number range		0
● Range of values		0 to 2^31 hours (when using SFC 101)
● Granularity		1 hour
● retentive		Yes; Must be restarted at each restart
Clock synchronization
● supported		Yes
● to MPI, master		Yes
● to MPI, slave		Yes
● to DP, master		Yes; With DP slave only slave clock
● to DP, slave		Yes
● in AS, master		Yes
● in AS, slave		No
Digital inputs
Number of digital inputs		24
● of which inputs usable for technological functions		16
integrated channels (DI)		24
Input characteristic curve in accordance with IEC 61131, type 1		Yes
horizontal installation
— up to 40 °C, max.		24
— up to 60 °C, max.		12
vertical installation
— up to 40 °C, max.		12
Input voltage
● Rated value (DC)		24 V
● for signal "0"		-3 to +5V
● for signal "1"		+15 to +30V
Input current
● for signal "1", typ.		8 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable		Yes; 0.1 / 0.3 / 3 / 15 ms (You can reconfigure the input delay of the standard inputs during program runtime. Please note that under certain circumstances your newly set filter time may not be effective until the next filter cycle.)
— Rated value		3 ms
for counter/technological functions
— at "0" to "1", max.		8 µs; Minimum pulse width/minimum pause between pulses at maximum counting frequency
Cable length
● shielded, max.		1 000 m; 50 m for technological functions
● unshielded, max.		600 m; For technological functions: No
for technological functions
— shielded, max.		50 m; at maximum count frequency
— unshielded, max.		not allowed
Digital outputs
Number of digital outputs		16
● of which high-speed outputs		4; Notice: You cannot connect the fast outputs of your CPU in parallel
integrated channels (DO)		16
Short-circuit protection		Yes; Clocked electronically
● Response threshold, typ.		1 A
Limitation of inductive shutdown voltage to		L+ (-48 V)
Controlling a digital input		Yes
Switching capacity of the outputs
● on lamp load, max.		5 W
Load resistance range
● lower limit		48 ?
● upper limit		4 k?
Output voltage
● for signal "1", min.		L+ (-0.8 V)
Output current
● for signal "1" rated value		500 mA
● for signal "1" permissible range, min.		5 mA
● for signal "1" permissible range, max.		0.6 A
● for signal "1" minimum load current		5 mA
● for signal "0" residual current, max.		0.5 mA
Parallel switching of two outputs
● for uprating		No
● for redundant control of a load		Yes
Switching frequency
● with resistive load, max.		100 Hz
● with inductive load, max.		0.5 Hz
● on lamp load, max.		100 Hz
● of the pulse outputs, with resistive load, max.		2.5 kHz
horizontal installation
— up to 40 °C, max.		3 A
— up to 60 °C, max.		2 A
vertical installation
— up to 40 °C, max.		2 A
Cable length
● shielded, max.		1 000 m
● unshielded, max.		600 m
Analog inputs
Number of analog inputs		5
● For voltage/current measurement		4
● For resistance/resistance thermometer measurement		1
integrated channels (AI)		5; 4 x current/voltage, 1 x resistance
permissible input voltage for current input (destruction limit), max.		5 V; Permanent
permissible input voltage for voltage input (destruction limit), max.		30 V; Permanent
permissible input current for voltage input (destruction limit), max.		0.5 mA; Permanent
permissible input current for current input (destruction limit), max.		50 mA; Permanent
Technical unit for temperature measurement adjustable		Yes; Degrees Celsius / degrees Fahrenheit / Kelvin
Input ranges
● Voltage		Yes; ±10 V / 100 kΩ; 0 V to 10 V / 100 kΩ
● Current		Yes; ±20 mA / 100 Ω; 0 mA to 20 mA / 100 Ω; 4 mA to 20 mA / 100 Ω
● Resistance thermometer		Yes; Pt 100 / 10 MΩ
● Resistance		Yes; 0 Ω to 600 Ω / 10 MΩ
Input ranges (rated values), voltages
● 0 to +10 V		Yes
● Input resistance (0 to 10 V)		100 k?
Input ranges (rated values), currents
● 0 to 20 mA		Yes
● Input resistance (0 to 20 mA)		100 ?
● -20 mA to +20 mA		Yes
● Input resistance (-20 mA to +20 mA)		100 ?
● 4 mA to 20 mA		Yes
● Input resistance (4 mA to 20 mA)		100 ?
Input ranges (rated values), resistance thermometer
● Pt 100		Yes
● Input resistance (Pt 100)		10 M?
Input ranges (rated values), resistors
● No-load voltage, typ.		3.3 V
● Measuring current, typ.		1,25 mA
● 0 to 600 ohms		Yes
● Input resistance (0 to 600 ohms)		10 M?
Thermocouple (TC)
Temperature compensation
— parameterizable		No
Characteristic linearization
● parameterizable		Yes; by software
— for resistance thermometer		Pt 100
Cable length
● shielded, max.		100 m
Analog outputs
Number of analog outputs		2
integrated channels (AO)		2
Voltage output, short-circuit protection		Yes
Voltage output, short-circuit current, max.		55 mA
Current output, no-load voltage, max.		14 V
Output ranges, voltage
● 0 to 10 V		Yes
● -10 V to +10 V		Yes
Output ranges, current
● 0 to 20 mA		Yes
● -20 mA to +20 mA		Yes
● 4 mA to 20 mA		Yes
Connection of actuators
● for voltage output two-wire connection		Yes; Without compensation of the line resistances
● for voltage output four-wire connection		No
● for current output two-wire connection		Yes
Load impedance (in rated range of output)
● with voltage outputs, min.		1 k?
● with voltage outputs, capacitive load, max.		0.1 µF
● with current outputs, max.		300 ?
● with current outputs, inductive load, max.		0.1 mH
Destruction limits against externally applied voltages and currents
● Voltages at the outputs towards MANA		16 V; Permanent
● Current, max.		50 mA; Permanent
Cable length
● shielded, max.		200 m
Analog value generation for the inputs
Measurement principle		Actual value encryption (successive approximation)
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.		12 bit
● Integration time, parameterizable		Yes; 16.6 / 20 ms
● Interference voltage suppression for interference frequency f1 in Hz		50 / 60 Hz
● permissible input frequency, max.		400 Hz
● Time constant of the input filter		0.38 ms
● Basic execution time of the module (all channels released)		1 ms
Analog value generation for the outputs
Integration and conversion time/resolution per channel
● Resolution with overrange (bit including sign), max.		12 bit
● Conversion time (per channel)		1 ms
Settling time
● for resistive load		0.6 ms
● for capacitive load		1 ms
● for inductive load		0.5 ms
Encoder
Connection of signal encoders
● for voltage measurement		Yes
● for current measurement as 2-wire transducer		Yes; with external supply
● for current measurement as 4-wire transducer		Yes
● for resistance measurement with two-wire connection		Yes; Without compensation of the line resistances
● for resistance measurement with three-wire connection		No
● for resistance measurement with four-wire connection		No
Connectable encoders
● 2-wire sensor		Yes
— permissible quiescent current (2-wire sensor), max.		1.5 mA
Errors/accuracies
Temperature error (relative to input range), (+/-)		0.006 %/K
Crosstalk between the inputs, min.		60 dB
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)		0.06 %
Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-)		0.1 %
Linearity error (relative to output range), (+/-)		0.15 %
Temperature error (relative to output range), (+/-)		0.01 %/K
Crosstalk between the outputs, min.		60 dB
Repeat accuracy in steady state at 25 °C (relative to output range), (+/-)		0.06 %
Operational error limit in overall temperature range
● Voltage, relative to input range, (+/-)		1 %
● Current, relative to input range, (+/-)		1 %
● Resistance, relative to input range, (+/-)		1 %
● Voltage, relative to output range, (+/-)		1 %
● Current, relative to output range, (+/-)		1 %
Basic error limit (operational limit at 25 °C)
● Voltage, relative to input range, (+/-)		0.8 %; Linearity error +/- 0.06 %
● Current, relative to input range, (+/-)		0.8 %; Linearity error +/- 0.06 %
● Resistance, relative to input range, (+/-)		0.8 %; Linearity error +/- 0.2%
● Resistance thermometer, relative to input range, (+/-)		0.8 %
● Voltage, relative to output range, (+/-)		0.8 %
● Current, relative to output range, (+/-)		0.8 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
● Series mode interference (peak value of interference < rated value of input range), min.		30 dB
● Common mode interference, min.		40 dB
Interfaces
Number of industrial Ethernet interfaces		0
Number of RS 485 interfaces		2; MPI and PROFIBUS DP
Number of RS 422 interfaces		0
1. Interface
Interface type		Integrated RS 485 interface
Physics		RS 485
Isolated		No
Power supply to interface (15 to 30 V DC), max.		200 mA
Functionality
● MPI		Yes
● PROFIBUS DP master		No
● PROFIBUS DP slave		No
● Point-to-point connection		No
MPI
● Transmission rate, max.		187.5 kbit/s
Services
— PG/OP communication		Yes
— Routing		Yes
— Global data communication		Yes
— S7 basic communication		Yes
— S7 communication		Yes; Only server, configured on one side
— S7 communication, as client		No; but via CP and loadable FB
— S7 communication, as server		Yes
2. Interface
Interface type		Integrated RS 485 interface
Physics		RS 485
Isolated		Yes
Power supply to interface (15 to 30 V DC), max.		200 mA
Functionality
● MPI		No
● PROFINET IO Controller		No
● PROFINET IO Device		No
● PROFINET CBA		No
● PROFIBUS DP master		Yes
● PROFIBUS DP slave		Yes
● Point-to-point connection		No
DP master
● Transmission rate, max.		12 Mbit/s
● Number of DP slaves, max.		124
Services
— PG/OP communication		Yes
— Routing		Yes
— Global data communication		No
— S7 basic communication		Yes; I blocks only
— S7 communication		Yes; Only server, configured on one side
— S7 communication, as client		No
— S7 communication, as server		Yes
— Equidistance		Yes
— Isochronous mode		No
— SYNC/FREEZE		Yes
— Activation/deactivation of DP slaves		Yes
— Number of DP slaves that can be simultaneously activated/deactivated, max.		8
— Direct data exchange (slave-to-slave communication)		Yes; As subscriber
— DPV1		Yes
Address area
— Inputs, max.		2 kbyte
— Outputs, max.		2 kbyte
User data per DP slave
— Inputs, max.		244 byte
— Outputs, max.		244 byte
DP slave
● GSD file		The latest GSD file is available on the Internet (http://www.siemens。。ｃｏｍ/profibus-gsd)
● Transmission rate, max.		12 Mbit/s
● automatic baud rate search		Yes; only with passive interface
● Address area, max.		32
● User data per address area, max.		32 byte
Services
— PG/OP communication		Yes
— Routing		Yes; Only with active interface
— Global data communication		No
— S7 basic communication		No
— S7 communication		Yes; Only server, configured on one side
— S7 communication, as client		No
— S7 communication, as server		Yes
— Direct data exchange (slave-to-slave communication)		Yes
— DPV1		No
Transfer memory
— Inputs		244 byte
— Outputs		244 byte
Communication functions
PG/OP communication		Yes
Data record routing		Yes
Global data communication
● supported		Yes
● Number of GD loops, max.		8
● Number of GD packets, max.		8
● Number of GD packets, transmitter, max.		8
● Number of GD packets, receiver, max.		8
● Size of GD packets, max.		22 byte
● Size of GD packet (of which consistent), max.		22 byte
S7 basic communication
● supported		Yes
● User data per job, max.		76 byte
● User data per job (of which consistent), max.		76 byte; 76 bytes (with X_SEND or X_RCV); 64 bytes (with X_PUT or X_GET as server)
S7 communication
● supported		Yes
● as server		Yes
● as client		Yes; Via CP and loadable FB
● User data per job, max.		180 kbyte; With PUT/GET
● User data per job (of which consistent), max.		240 byte; as server
S5 compatible communication
● supported		Yes; via CP and loadable FC
Number of connections
● overall		12
● usable for PG communication		11
— reserved for PG communication		1
— adjustable for PG communication, min.		1
— adjustable for PG communication, max.		11
● usable for OP communication		11
— reserved for OP communication		1
— adjustable for OP communication, min.		1
— adjustable for OP communication, max.		11
● usable for S7 basic communication		8
— reserved for S7 basic communication		0
— adjustable for S7 basic communication, min.		0
— adjustable for S7 basic communication, max.		8
● usable for routing		4; max.
S7 message functions
Number of login stations for message functions, max.		12; Depending on the configured connections for PG/OP and S7 basic communication
Process diagnostic messages		Yes
simultaneously active Alarm-S blocks, max.		300
Test commissioning functions
Status block		Yes; Up to 2 simultaneously
Single step		Yes
Number of breakpoints		4
Status/control
● Status/control variable		Yes
● Variables		Inputs, outputs, memory bits, DB, times, counters
● Number of variables, max.		30
— of which status variables, max.		30
— of which control variables, max.		14
Forcing
● Forcing		Yes
● Forcing, variables		Inputs, outputs
● Number of variables, max.		10
Diagnostic buffer
● present		Yes
● Number of entries, max.		500
— adjustable		No
— of which powerfail-proof		100; Only the last 100 entries are retained
● Number of entries readable in RUN, max.		499
— can be set		Yes; From 10 to 499
— preset		10
Service data
● can be read out		Yes
Interrupts/diagnostics/status information
Diagnostics indication LED
● Status indicator digital input (green)		Yes
● Status indicator digital output (green)		Yes
Integrated Functions
Number of counters		4; See "Technological Functions" manual
Counting frequency (counter) max.		60 kHz
Frequency measurement		Yes
Number of frequency meters		4; up to 60 kHz (see "Technological Functions" manual)
controlled positioning		Yes
integrated function blocks (closed-loop control)		Yes; PID controller (see "Technological Functions" manual)
PID controller		Yes
Number of pulse outputs		4; Pulse width modulation up to 2.5 kHz (see "Technological Functions" Manual)
Limit frequency (pulse)		2.5 kHz
Potential separation
Potential separation digital inputs
● Potential separation digital inputs		Yes
● between the channels		No
● between the channels and backplane bus		Yes
Potential separation digital outputs
● Potential separation digital outputs		Yes
● between the channels		Yes
● between the channels, in groups of		8
● between the channels and backplane bus		Yes
Potential separation analog inputs
● Potential separation analog inputs		Yes; common for analog I/O
● between the channels		No
● between the channels and backplane bus		Yes
Potential separation analog outputs
● Potential separation analog outputs		Yes; common for analog I/O
● between the channels		No
● between the channels and backplane bus		Yes
Permissible potential difference
between different circuits		75 V DC/60 V AC
Between the inputs and MANA (UCM)		8 V DC
between MANA and M internally (UISO)		75 V DC/60 V AC
Isolation
Isolation tested with		600 V DC
Ambient conditions
Ambient temperature during operation
● min.		0 °C
● max.		60 °C
Configuration
Configuration software
● STEP 7		Yes; STEP 7 V5.5 + SP1 or higher or STEP 7 V5.3 + SP2 or higher with HSP 203
● STEP 7 Lite		No
Programming
● Command set		see instruction list
● Nesting levels		8
● System functions (SFC)		see instruction list
● System function blocks (SFB)		see instruction list
Programming language
— LAD		Yes
— FBD		Yes
— STL		Yes
— SCL		Yes
— CFC		Yes
— GRAPH		Yes
— HiGraph®		Yes
Know-how protection
● User program protection/password protection		Yes
● Block encryption		Yes; With S7 block Privacy
Dimensions
Width		120 mm
Height		125 mm
Depth		130 mm
Weights
Weight, approx.		680 g