SM 1222 數字量輸出模塊跳轉到概述 應用 功能 技術規范 更多信息 概述- 為CPU的本機I/O提供更多的數字量輸出
- 用于使控制器靈活地適應相關任務的要求
- 用于使用附加輸出對系統進行后續擴展

應用數字量輸出模塊允許將數字信號從控制器輸出到過程。 這為用戶提供了下列優勢: - 適應性:
使用可以根據需要混合的信號模塊,用戶可以使其控制器準確地滿足相關任務的要求。這可以避免產生不必要的投資。可以使用帶有 8 個、16 個和 32 個輸入/輸出通道的模塊。 - 靈活性:
如果任務后續有所擴展,可以升級控制器。更新用戶程序非常簡單。

功能SM 1222 數字量輸出信號模塊將 SIMATIC S7-1200 的內部信號電平轉換為過程所需的外部信號電平。 
技術規范Article number | 6ES7222-1BF32-0XB0 | 6ES7222-1BH32-0XB0 | 6ES7222-1HF32-0XB0 | 6ES7222-1HH32-0XB0 | 6ES7222-1XF32-0XB0 |
---|
| DIGITAL OUTPUT SM1222, 8 DO, 24V DC | DIGITAL OUTPUT SM1222, 16 DO, 24V DC | DIGITAL OUTPUT SM 1222, 8 DO, RELAY | DIGITAL OUTPUT SM1222, 16 DO, RELAY | DIGITAL OUTPUT SM 1222, 8 DO, CHANGEOVER |
---|
Supply voltage | | | | | | permissible range, lower limit (DC) | 20.4 V | 20.4 V | 20.4 V | 20.4 V | 20.4 V | permissible range, upper limit (DC) | 28.8 V | 28.8 V | 28.8 V | 28.8 V | 28.8 V | Input current | | | | | | from backplane bus 5 V DC, max. | 120 mA | 140 mA | 120 mA | 135 mA | 140 mA | Digital outputs | | | | | | | | | 11 mA/relay coil | 11 mA/relay coil | 16.7 mA/relay coil | Power loss | | | | | | Power loss, typ. | 1.5 W | 2.5 W | 4.5 W | 8.5 W | 5 W | Digital outputs | | | | | | Number of digital outputs | 8 | 16 | 8 | 16 | 8 | | 1 | 1 | 2 | 1 | 1 | Short-circuit protection | No; to be provided externally | No; to be provided externally | No; to be provided externally | No; to be provided externally | No; to be provided externally | Limitation of inductive shutdown voltage to | typ. (L+) -48 V | typ. (L+) -48 V | | | | Switching capacity of the outputs | | | | | | | 0.5 A | 0.5 A | 2 A | 2 A | 2 A | | 5 W | 5 W | 30 W with DC, 200 W with AC | 30 W with DC, 200 W with AC | 30 W with DC, 200 W with AC | Output voltage | | | | | | | 24 V | 24 V | 5 V DC to 30 V DC | 5 V DC to 30 V DC | 5 V DC to 30 V DC | | | | 5 V AC to 250 V AC | 5 V AC to 250 V AC | 5 V AC to 250 V AC | | 0.1 V; with 10 kOhm load | 0.1 V; with 10 kOhm load | | | | | 20 V DC | 20 V DC | | | | Output current | | | | | | | 0.5 A | 0.5 A | 2 A | 2 A | 2 A | | 10 µA | 10 µA | | | | Output delay with resistive load | | | | | | | 50 µs | 50 µs | 10 ms | 10 ms | 10 ms | | 200 µs | 200 µs | 10 ms | 10 ms | 10 ms | Total current of the outputs (per group) | | | | | | horizontal installation | | | | | | | 4 A; Current per mass | 8 A; Current per mass | 10 A; Current per mass | 10 A; Current per mass | 2 A; Current per mass | Relay outputs | | | | | | | | | 8 | 16 | 8 | | | | 24 V | 24 V | 24 V | | | | mechanically 10 million, at rated load voltage 100 000 | mechanically 10 million, at rated load voltage 100 000 | mechanically 10 million, at rated load voltage 100 000 | Switching capacity of contacts | | | | | | | 0.5 A | 0.5 A | 2 A | 2 A | 2 A | | 5 W | 5 W | 30 W with DC, 200 W with AC | 30 W with DC, 200 W with AC | 30 W with DC, 200 W with AC | | 0.5 A | 0.5 A | 2 A | 2 A | 2 A | Cable length | | | | | | | 500 m | 500 m | 500 m | 500 m | 500 m | | 150 m | 150 m | 150 m | 150 m | 150 m | Interrupts/diagnostics/status information | | | | | | Alarms | | | | | | | Yes | Yes | Yes | Yes | Yes | Diagnostics indication LED | | | | | | | Yes | Yes | Yes | Yes | Yes | Potential separation | | | | | | Potential separation digital outputs | | | | | | | | | Relays | Relays | Relays | | 1 | 1 | 2 | 4 | 1 | | 500 V AC | 500 V AC | 1500 V AC for 1 minute | 1500 V AC for 1 minute | 1500 V AC for 1 minute | Permissible potential difference | | | | | | between different circuits | | | 750 V AC for 1 minute | 750 V AC for 1 minute | 750 V AC for 1 minute | Degree and class of protection | | | | | | Degree of protection acc. to EN 60529 | | | | | | | Yes | Yes | Yes | Yes | Yes | Standards, approvals, certificates | | | | | | CE mark | Yes | Yes | Yes | Yes | Yes | CSA approval | Yes | Yes | Yes | Yes | Yes | UL approval | Yes | Yes | Yes | Yes | Yes | cULus | Yes | Yes | Yes | Yes | Yes | FM approval | Yes | Yes | Yes | Yes | Yes | RCM (formerly C-TICK) | Yes | Yes | Yes | Yes | Yes | Marine approval | Yes | Yes | Yes | Yes | Yes | Ambient conditions | | | | | | Free fall | | | | | | | 0.3 m; five times, in product package | 0.3 m; five times, in product package | 0.3 m; five times, in product package | 0.3 m; five times, in product package | 0.3 m; five times, in product package | Ambient temperature during operation | | | | | | | -20 °C | -20 °C | -20 °C | -20 °C | -20 °C | | 60 °C | 60 °C | 60 °C | 60 °C; Number of simultaneously activated outputs: 8 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 16 at 55 °C horizontal or 45 °C vertical | 60 °C; Number of simultaneously activated outputs: 4 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 8 at 55 °C horizontal or 45 °C vertical | | -20 °C | -20 °C | -20 °C | -20 °C | -20 °C | | 60 °C | 60 °C | 60 °C | 60 °C | 60 °C | | -20 °C | -20 °C | -20 °C | -20 °C | -20 °C | | 50 °C | 50 °C | 50 °C | 50 °C | 50 °C | | 5°C to 55°C, 3°C / minute | 5°C to 55°C, 3°C / minute | 5°C to 55°C, 3°C / minute | 5°C to 55°C, 3°C / minute | 5°C to 55°C, 3°C / minute | Ambient temperature during storage/transportation | | | | | | | -40 °C | -40 °C | -40 °C | -40 °C | -40 °C | | 70 °C | 70 °C | 70 °C | 70 °C | 70 °C | Air pressure acc. to IEC 60068-2-13 | | | | | | | 660 hPa | 660 hPa | 660 hPa | 660 hPa | 660 hPa | | 1 080 hPa | 1 080 hPa | 1 080 hPa | 1 080 hPa | 1 080 hPa | Relative humidity | | | | | | | 95 % | 95 % | 95 % | 95 % | 95 % | Connection method | | | | | | required front connector | Yes | Yes | Yes | Yes | Yes | Mechanics/material | | | | | | Enclosure material (front) | | | | | | | Yes | Yes | Yes | Yes | Yes | Dimensions | | | | | | Width | 45 mm | 45 mm | 45 mm | 45 mm | 70 mm | Height | 100 mm | 100 mm | 100 mm | 100 mm | 100 mm | Depth | 75 mm | 75 mm | 75 mm | 75 mm | 75 mm | Weights | | | | | | Weight, approx. | 180 g | 220 g | 190 g | 260 g | 310 g | 
更多信息手冊 要下載相關的信息資料,請訪問: http://www.siemens。。com/simatic/printmaterial 
| 全部關于 SM 1222 數字量輸出模塊 產品與解決方案在線目錄與訂購系統技術信息服務與支持與合作伙伴服務項目 
SM 1222 數字量輸出模塊跳轉到概述 應用 功能 技術規范 更多信息 概述- 為CPU的本機I/O提供更多的數字量輸出
- 用于使控制器靈活地適應相關任務的要求
- 用于使用附加輸出對系統進行后續擴展

應用數字量輸出模塊允許將數字信號從控制器輸出到過程。 這為用戶提供了下列優勢: - 適應性:
使用可以根據需要混合的信號模塊,用戶可以使其控制器準確地滿足相關任務的要求。這可以避免產生不必要的投資。可以使用帶有 8 個、16 個和 32 個輸入/輸出通道的模塊。 - 靈活性:
如果任務后續有所擴展,可以升級控制器。更新用戶程序非常簡單。

功能SM 1222 數字量輸出信號模塊將 SIMATIC S7-1200 的內部信號電平轉換為過程所需的外部信號電平。 
技術規范Article number | 6ES7222-1BF32-0XB0 | 6ES7222-1BH32-0XB0 | 6ES7222-1HF32-0XB0 | 6ES7222-1HH32-0XB0 | 6ES7222-1XF32-0XB0 |
---|
| DIGITAL OUTPUT SM1222, 8 DO, 24V DC | DIGITAL OUTPUT SM1222, 16 DO, 24V DC | DIGITAL OUTPUT SM 1222, 8 DO, RELAY | DIGITAL OUTPUT SM1222, 16 DO, RELAY | DIGITAL OUTPUT SM 1222, 8 DO, CHANGEOVER |
---|
Supply voltage | | | | | | permissible range, lower limit (DC) | 20.4 V | 20.4 V | 20.4 V | 20.4 V | 20.4 V | permissible range, upper limit (DC) | 28.8 V | 28.8 V | 28.8 V | 28.8 V | 28.8 V | Input current | | | | | | from backplane bus 5 V DC, max. | 120 mA | 140 mA | 120 mA | 135 mA | 140 mA | Digital outputs | | | | | | | | | 11 mA/relay coil | 11 mA/relay coil | 16.7 mA/relay coil | Power loss | | | | | | Power loss, typ. | 1.5 W | 2.5 W | 4.5 W | 8.5 W | 5 W | Digital outputs | | | | | | Number of digital outputs | 8 | 16 | 8 | 16 | 8 | | 1 | 1 | 2 | 1 | 1 | Short-circuit protection | No; to be provided externally | No; to be provided externally | No; to be provided externally | No; to be provided externally | No; to be provided externally | Limitation of inductive shutdown voltage to | typ. (L+) -48 V | typ. (L+) -48 V | | | | Switching capacity of the outputs | | | | | | | 0.5 A | 0.5 A | 2 A | 2 A | 2 A | | 5 W | 5 W | 30 W with DC, 200 W with AC | 30 W with DC, 200 W with AC | 30 W with DC, 200 W with AC | Output voltage | | | | | | | 24 V | 24 V | 5 V DC to 30 V DC | 5 V DC to 30 V DC | 5 V DC to 30 V DC | | | | 5 V AC to 250 V AC | 5 V AC to 250 V AC | 5 V AC to 250 V AC | | 0.1 V; with 10 kOhm load | 0.1 V; with 10 kOhm load | | | | | 20 V DC | 20 V DC | | | | Output current | | | | | | | 0.5 A | 0.5 A | 2 A | 2 A | 2 A | | 10 µA | 10 µA | | | | Output delay with resistive load | | | | | | | 50 µs | 50 µs | 10 ms | 10 ms | 10 ms | | 200 µs | 200 µs | 10 ms | 10 ms | 10 ms | Total current of the outputs (per group) | | | | | | horizontal installation | | | | | | | 4 A; Current per mass | 8 A; Current per mass | 10 A; Current per mass | 10 A; Current per mass | 2 A; Current per mass | Relay outputs | | | | | | | | | 8 | 16 | 8 | | | | 24 V | 24 V | 24 V | | | | mechanically 10 million, at rated load voltage 100 000 | mechanically 10 million, at rated load voltage 100 000 | mechanically 10 million, at rated load voltage 100 000 | Switching capacity of contacts | | | | | | | 0.5 A | 0.5 A | 2 A | 2 A | 2 A | | 5 W | 5 W | 30 W with DC, 200 W with AC | 30 W with DC, 200 W with AC | 30 W with DC, 200 W with AC | | 0.5 A | 0.5 A | 2 A | 2 A | 2 A | Cable length | | | | | | | 500 m | 500 m | 500 m | 500 m | 500 m | | 150 m | 150 m | 150 m | 150 m | 150 m | Interrupts/diagnostics/status information | | | | | | Alarms | | | | | | | Yes | Yes | Yes | Yes | Yes | Diagnostics indication LED | | | | | | | Yes | Yes | Yes | Yes | Yes | Potential separation | | | | | | Potential separation digital outputs | | | | | | | | | Relays | Relays | Relays | | 1 | 1 | 2 | 4 | 1 | | 500 V AC | 500 V AC | 1500 V AC for 1 minute | 1500 V AC for 1 minute | 1500 V AC for 1 minute | Permissible potential difference | | | | | | between different circuits | | | 750 V AC for 1 minute | 750 V AC for 1 minute | 750 V AC for 1 minute | Degree and class of protection | | | | | | Degree of protection acc. to EN 60529 | | | | | | | Yes | Yes | Yes | Yes | Yes | Standards, approvals, certificates | | | | | | CE mark | Yes | Yes | Yes | Yes | Yes | CSA approval | Yes | Yes | Yes | Yes | Yes | UL approval | Yes | Yes | Yes | Yes | Yes | cULus | Yes | Yes | Yes | Yes | Yes | FM approval | Yes | Yes | Yes | Yes | Yes | RCM (formerly C-TICK) | Yes | Yes | Yes | Yes | Yes | Marine approval | Yes | Yes | Yes | Yes | Yes | Ambient conditions | | | | | | Free fall | | | | | | | 0.3 m; five times, in product package | 0.3 m; five times, in product package | 0.3 m; five times, in product package | 0.3 m; five times, in product package | 0.3 m; five times, in product package | Ambient temperature during operation | | | | | | | -20 °C | -20 °C | -20 °C | -20 °C | -20 °C | | 60 °C | 60 °C | 60 °C | 60 °C; Number of simultaneously activated outputs: 8 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 16 at 55 °C horizontal or 45 °C vertical | 60 °C; Number of simultaneously activated outputs: 4 (no adjacent points) at 60 °C horizontal or 50 °C vertical, 8 at 55 °C horizontal or 45 °C vertical | | -20 °C | -20 °C | -20 °C | -20 °C | -20 °C | | 60 °C | 60 °C | 60 °C | 60 °C | 60 °C | | -20 °C | -20 °C | -20 °C | -20 °C | -20 °C | | 50 °C | 50 °C | 50 °C | 50 °C | 50 °C | | 5°C to 55°C, 3°C / minute | 5°C to 55°C, 3°C / minute | 5°C to 55°C, 3°C / minute | 5°C to 55°C, 3°C / minute | 5°C to 55°C, 3°C / minute | Ambient temperature during storage/transportation | | | | | | | -40 °C | -40 °C | -40 °C | -40 °C | -40 °C | | 70 °C | 70 °C | 70 °C | 70 °C | 70 °C | Air pressure acc. to IEC 60068-2-13 | | | | | | | 660 hPa | 660 hPa | 660 hPa | 660 hPa | 660 hPa | | 1 080 hPa | 1 080 hPa | 1 080 hPa | 1 080 hPa | 1 080 hPa | Relative humidity | | | | | | | 95 % | 95 % | 95 % | 95 % | 95 % | Connection method | | | | | | required front connector | Yes | Yes | Yes | Yes | Yes | Mechanics/material | | | | | | Enclosure material (front) | | | | | | | Yes | Yes | Yes | Yes | Yes | Dimensions | | | | | | Width | 45 mm | 45 mm | 45 mm | 45 mm | 70 mm | Height | 100 mm | 100 mm | 100 mm | 100 mm | 100 mm | Depth | 75 mm | 75 mm | 75 mm | 75 mm | 75 mm | Weights | | | | | | Weight, approx. | 180 g | 220 g | 190 g | 260 g | 310 g | 
更多信息手冊 要下載相關的信息資料,請訪問: http://www.siemens。。com/simatic/printmaterial 
| 全部關于 SM 1222 數字量輸出模塊 產品與解決方案在線目錄與訂購系統技術信息服務與支持與合作伙伴服務項目 
|
|
|