西門子6ES75131AL010AB0型號及參數 西門子6ES75131AL010AB0型號及參數 

6ES7513-1AL01-0AB0 SIMATIC S7-1500, CPU 1513-1 PN, *處理器 mit 工作存儲器 300 KB 用于 程序 和 1,5MB 用于數據, 1. 接口:PROFINET IRT mit 2 Port 換機, 40 NS Bit-Performance, 需要 SIMATIC 存儲卡

公司名稱：上海朔川電氣設備有限公司

• 聯 系 人：吉夢琪
• ：
• 地址：上海市金山區涇波路129號
• ：2840735331

• CPU 1513-1 PN 訂貨數據   附件   產品信息   組態工具 跳轉到 概述 應用 設計 功能 技術規范 更多信息 概述 適用于具有中等要求的應用的 CPU，用于 S7-1500 控制器產品系列中的程序/數據存儲 具有高處理速度，適用于二進制和浮點運算 在具有集中式和分布式 I/O 的生產線上作為集中式控制器使用 PROFINET IO IRT 接口，帶 2 端換機 PROFINET I/O 控制器，用于在 PROFINET 上運行分布式 I/O 用于連接 CPU 作為 SIMATIC 或 非西門子 PROFINET I/O 控制器下的 PROFINET 設備的 PRIFINET 智能設備 OPC UA 服務器（數據訪問）作為運行時選件，可輕易將 SIMATIC S7-1500 連接至第三方設備/系統 等時同步模式 集成運動控制功能，用于控制速度控制軸和定位軸，支持外部編碼器，凸輪/凸輪軌道和探頭 用于診斷集成 Web 服務器，帶有創建用戶定義的 Web 站點的選項 注： SIMATIC 存儲卡（用來運行 CPU） 應用 The CPU 1513-1 PN is the CPU with a medium program and data memory for applications that also contain distributed automation structures alongside central I/O. It can be used as a PROFINET IO controller or as distributed inligence (PROFINET I-Device). The integrated PROFINET IO IRT interface is designed as 2-port switch so that a linear topology can be set up in the system. In addition, the CPU offers comprehensive control functionalities as well as the ability to connect drives via standardized PLC-open blocks. 設計 The CPU 1513-1 PN 的特點： 功能強大的處理器： 該 CPU 的單條二進制命令的命令執行時間可低至 40 ns。 大容量工作存儲器： 300KB，用于程序；1.5 MB，用于數據 采用 SIMATIC 存儲卡作為加裝存儲器； 允許實現例如數據日志和歸檔等其它功能 靈活的擴展功能： 單層組態zui多可支持 32 個模塊（CPU + 31 個模塊） 顯示器的功能為： 顯示概覽信息，例如，集成接口的 IP 地址、站名稱、高級別名稱、位置名稱等。 顯示器以及診斷確認和用戶消息 模塊信息顯示 顯示設置 顯示可由用戶定義的徽標 IP 地址設置 日期和時間設置 選擇操作模式 復位 CPU 至出廠設置 項目的備份與恢復 禁用/啟用顯示屏 啟用保護級別 PROFINET IO IRT 接口用于通過 PROFINET 進行分布式 I/O 連接 功能 性能 指令處理速度更快, 取決于 CPU 型號、語言擴展和新的數據類型 由于背板總線速度顯著提高，CPU 的響應時間縮短 功能強大的網絡連接： 每個 CPU 均標配PROFINET IO IRT（2 端換機）標準接口。 集成技術 通過標準化的塊 (PLCopen) 連接模擬驅動器和具有 PROFIdrive 功能的驅動器 支持速度控制軸和定位軸以及外部編碼器，各軸之間可實現位置精確的傳動，凸輪/凸輪軌道和探頭 追蹤功能適用于所有 CPU 標簽，既適用于實時診斷，也適用于偶發錯誤檢測；還可通過 CPU的網頁服務器來調用 全面的控制功能，例如，通過便于組態的塊可自動優化控制參數實現*控制質量 集成安全功能 通過密碼進行知識保護，防止未經*讀取和修改程序塊 通過復制保護，可綁定 SIMATIC 存儲卡的程序塊和序列號：只有在將配置的存儲卡插到 CPU 中時，該程序塊才可運行。 4-級 *理念： 與 HMI 設備的通信也會受到限制。 操作保護： 控制器可以識別工程組態數據的更改和未*傳輸。 設計與操作 顯示概覽信息： 例如，站名稱，工廠標識符，位置名稱，診斷信息，模塊信息，顯示設置。 顯示器上可能的操作： 設置 CPU 或所連接以太網通信處理器的地址、設置日期和時間、選擇 CPU 的操作模式、復位 CPU 至默認設置、禁用/啟用顯示器、激活保護等級，確認消息，備份和恢復項目。 集成系統診斷 顯示屏上、TIA 博途中、HMI 設備上以及 Web 服務器上以純文本形式*顯示系統診斷信息（甚至能顯示來自變頻器的消息），即使 CPU 處于停止模式也會進行更新。 集成在 CPU 的固件中，無須進行特殊組態 SIMATIC 存儲卡(用來運行 CPU) 用作插入式裝載存儲器，或用于更新固件。 還可用于存儲附加文檔或 csv 文件（用于配方和歸檔） 通過用戶程序的系統函數創建數據塊實現數據存儲/讀取 數據記錄（歸檔）和配方 配方和歸檔以 csv 文件保存在 SIMATIC 存儲卡中； 便于使用 Office 工具或通過 web 服務器，訪問工廠運行數據 通過網頁瀏覽器或 SD 讀卡器，可方便地訪問機器的組態數據（與控制器之間的雙向數據換） 編程 使用 STEP 7 Professional V12 或更高版本進行編程 用于從 SIMATIC S7-300/S7-400 移植到 S7-1500 的移植工具；可基本上自動轉換程序代碼。記錄不可轉換的代碼，并可以手動進行調整。 STEP 7 V11 項目可在兼容模式下繼續和 STEP 7 V12 組合使用 。 S7-1200 程序可通過復制/粘貼手段轉移至 S7-1500 技術規范 Article number 6ES7513-1AL01-0AB0   CPU 1513-1 PN, 300KB PROG., 1,5MB DATA General information   Product type designation CPU 1513-1 PN HW functional status FS03 Firmware version V2.1 Engineering with   ● STEP 7 TIA Portal configurable/integrated as of version V14 SP1 (FW V2.1) / V13 SP1 Update 4 (FW V1.8) or higher Configuration control   via dataset Yes Display   Screen diagonal [cm] 3.45 cm Control elements   Number of keys 6 Mode selector switch 1 Supply voltage   Type of supply voltage 24 V DC permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Mains buffering   ● Mains/voltage failure stored energy time 5 ms Input current   Current consumption (rated value) 0.7 A Inrush current, max. 1.9 A; Rated value I²t 0.02 A²·s Power   Infeed power to the backplane bus 10 W Power consumption from the backplane bus (balanced) 5.5 W Power loss   Power loss, typ. 5.7 W Memory   Number of slots for SIMATIC memory card 1 SIMATIC memory card required Yes Work memory   ● integrated (for program) 300 kbyte ● integrated (for data) 1.5 Mbyte Load memory   ● Plug-in (SIMATIC Memory Card), max. 32 Gbyte Backup   ● maintenance-free Yes CPU processing times   for bit operations, typ. 40 ns for word operations, typ. 48 ns for fixed point arithmetic, typ. 64 ns for floating point arithmetic, typ. 256 ns CPU-blocks   Number of elements (total) 2 000; Blocks (OB, FB, FC, DB) and UDTs DB   ● Number range 1 ... 60 999; subdivided into: number range that can be used by the user: 1 ... 59 999, and number range of DBs created via SFC 86: 60 000 ... 60 999 ● Size, max. 1.5 Mbyte; For non-optimized block accesses, the max. size of the DB is 64 KB FB   ● Number range 0 ... 65 535 ● Size, max. 300 kbyte FC   ● Number range 0 ... 65 535 ● Size, max. 300 kbyte OB   ● Size, max. 300 kbyte ● Number of free cycle OBs 100 ● Number of time alarm OBs 20 ● Number of delay alarm OBs 20 ● Number of cyclic interrupt OBs 20; With minimum OB 3x cycle of 500 µs ● Number of process alarm OBs 50 ● Number of DPV1 alarm OBs 3 ● Number of isochronous mode OBs 1 ● Number of technology synchronous alarm OBs 2 ● Number of startup OBs 100 ● Number of asynchronous error OBs 4 ● Number of synchronous error OBs 2 ● Number of diagnostic alarm OBs 1 Nesting depth   ● per priority class 24 Counters, timers and their retentivity   S7 counter   ● Number 2 048 Retentivity   — adjustable Yes IEC counter   ● Number Any (only limited by the main memory) Retentivity   — adjustable Yes S7 times   ● Number 2 048 Retentivity   — adjustable Yes IEC timer   ● Number Any (only limited by the main memory) Retentivity   — adjustable Yes Data areas and their retentivity   Retentive data area (incl. timers, counters, flags), max. 128 kbyte; In total; available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 88 KB Extended retentive data area (incl. timers, counters, flags), max. 1.5 Mbyte; When using PS 60W 24/48/60V DC HF Flag   ● Number, max. 16 kbyte ● Number of clock memories 8; 8 clock memory bits, grouped into one clock memory byte Data blocks   ● Retentivity adjustable Yes ● Retentivity preset No Local data   ● per priority class, max. 64 kbyte; max. 16 KB per block Address area   Number of IO modules 2 048; max. number of modules / submodules I/O address area   ● Inputs 32 kbyte; All inputs are in the process image ● Outputs 32 kbyte; All outputs are in the process image per integrated IO subsystem   — Inputs (volume) 8 kbyte — Outputs (volume) 8 kbyte per CM/CP   — Inputs (volume) 8 kbyte — Outputs (volume) 8 kbyte Subprocess images   ● Number of subprocess images, max. 32 Hardware configuration   Number of distributed IO systems 32; A distributed I/O system is characterized not only by the integration of distributed I/O via PROFINET or PROFIBUS communication modules, but also by the connection of I/O via AS-i master modules or links (e.g. IE/PB-Link) Number of DP masters   ● Via CM 6; A maximum of 6 CMs (PROFINET + PROFIBUS) can be inserted in total Number of IO Controllers   ● integrated 1 ● Via CM 6; A maximum of 6 CMs (PROFINET + PROFIBUS) can be inserted in total Rack   ● Modules per rack, max. 32; CPU + 31 modules ● Number of lines, max. 1 PtP CM   ● Number of PtP CMs the number of connectable PtP CMs is only limited by the number of available slots Time of day   Clock   ● Type Hardware clock ● Backup time 6 wk; At 40 °C ambient temperature, typically ● Deviation per day, max. 10 s; Typ.: 2 s Operating hours counter   ● Number 16 Clock synchronization   ● supported Yes ● in AS, master Yes ● in AS, slave Yes ● on Ethernet via NTP Yes Interfaces   Number of PROFINET interfaces 1 1. Interface   Interface types   ● Number of ports 2 ● integrated switch Yes ● RJ 45 (Ethernet) Yes; X1 Functionality   ● IP protocol Yes; *4 ● PROFINET IO Controller Yes ● PROFINET IO Device Yes ● SIMATIC communication Yes ● Open IE communication Yes ● Web server Yes ● Media redundancy Yes PROFINET IO Controller   Services   — PG/OP communication Yes — S7 routing Yes — Isochronous mode Yes — Open IE communication Yes — IRT Yes — MRP Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50 — MRPD Yes; Requirement: IRT — Prioritized startup Yes; Max. 32 PROFINET devices — Number of connectable IO Devices, max. 128; In total, up to 512 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET — Of which IO devices with IRT, max. 64 — Number of connectable IO Devices for RT, max. 128 — of which in line, max. 128 — Number of IO Devices that can be simultaneously activated/deactivated, max. 8; in total across all interfaces — Number of IO Devices per tool, max. 8 — Updating times The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data Update time for IRT   — for send cycle of 250 µs 250 μs to 4 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 500 µs of the isochronous OB is decisive — for send cycle of 500 µs 500 µs to 8 ms — for send cycle of 1 ms 1 ms to 16 ms — for send cycle of 2 ms 2 ms to 32 ms — for send cycle of 4 ms 4 ms to 64 ms — With IRT and parameterization of "odd" send cycles Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs) Update time for RT   — for send cycle of 250 µs 250 µs to 128 ms — for send cycle of 500 µs 500 µs to 256 ms — for send cycle of 1 ms 1 ms to 512 ms — for send cycle of 2 ms 2 ms to 512 ms — for send cycle of 4 ms 4 ms to 512 ms PROFINET IO Device   Services   — PG/OP communication Yes — S7 routing Yes — Isochronous mode No — Open IE communication Yes — IRT Yes — MRP Yes — MRPD Yes; Requirement: IRT — PROFIenergy Yes — Shared device Yes — Number of IO Controllers with shared device, max. 4 Interface types   RJ 45 (Ethernet)   ● 100 Mbps Yes ● Autonegotiation Yes ● Autocrossing Yes ● Industrial Ethernet status LED Yes Protocols   Number of connections   ● Number of connections, max. 128; via integrated interfaces of the CPU and connected CPs / CMs ● Number of connections reserved for ES/HMI/web 10 ● Number of connections via integrated interfaces 88 ● Number of S7 routing paths 16 PROFINET IO Controller   Services   — PG/OP communication Yes — S7 routing Yes — Isochronous mode Yes — Open IE communication Yes — IRT Yes — MRP Yes; As MRP redundancy manager and/or MRP client; max. number of devices in the ring: 50 — MRPD Yes; Requirement: IRT — PROFIenergy Yes — Prioritized startup Yes; Max. 32 PROFINET devices — Number of connectable IO Devices, max. 128; In total, up to 512 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET — Of which IO devices with IRT, max. 64 — Number of connectable IO Devices for RT, max. 128 — of which in line, max. 128 — Number of IO Devices that can be simultaneously activated/deactivated, max. 8; in total across all interfaces — Number of IO Devices per tool, max. 8 — Updating times The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data SIMATIC communication   ● S7 communication, as server Yes ● S7 communication, as client Yes ● User data per job, max. See online help (S7 communication, user data size) Open IE communication   ● TCP/IP Yes — Data length, max. 64 kbyte — several passive connections per port, supported Yes ● ISO-on-TCP (RFC1006) Yes — Data length, max. 64 kbyte ● UDP Yes — Data length, max. 1 472 byte — UDP multicast Yes; Max. 5 multicast circuits ● DHCP No ● SNMP Yes ● DCP Yes ● LLDP Yes Web server   ● HTTP Yes; Standard and user pages ● HTTPS Yes; Standard and user pages OPC UA   ● OPC UA Server Yes; Data access (read, write, subscribe), runtime license required — Application authentication Yes — Security policies Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 — User authentication "anonymous" or by user name & password Further protocols   ● MODBUS Yes; MODBUS TCP Media redundancy   ● Switchover time on line break, typ. 200 ms; For MRP, bumpless for MRPD ● Number of stations in the ring, max. 50 Isochronous mode   Isochronous operation (application synchronized up to terminal) Yes; With minimum OB 6x cycle of 500 µs Equidistance Yes S7 message functions   Number of login stations for message functions, max. 32 Program alarms Yes Number of configurable program alarms 5 000 Number of simultaneously active program alarms   ● Number of program alarms 300 ● Number of alarms for system diagnostics 100 ● Number of alarms for motion technology objects 80 Test commissioning functions   Joint commission (Team Engineering) Yes; Parallel online access possible for up to 5 engineering systems Status block Yes; Up to 8 simultaneously (in total across all ES clients) Single step No Status/control   ● Status/control variable Yes ● Variables Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters ● Number of variables, max.   — of which status variables, max. 200; per job — of which control variables, max. 200; per job Forcing   ● Forcing, variables Peripheral inputs/outputs ● Number of variables, max. 200 Diagnostic buffer   ● present Yes ● Number of entries, max. 1 000 — of which powerfail-proof 500 Traces   ● Number of configurable Traces 4; Up to 512 KB of data per trace are possible Interrupts/diagnostics/status information   Diagnostics indication LED   ● RUN/STOP LED Yes ● ERROR LED Yes ● MAINT LED Yes ● Connection display LINK TX/RX Yes Supported technology objects   Motion Control Yes; Note: The number of axes affects the cycle time of the PLC program; selection guide via the TIA Selection Tool or SIZER ● Number of available Motion Control resources for technology objects (except cam disks) 800 ● Required Motion Control resources   — per speed-controlled axis 40 — per positioning axis 80 — per synchronous axis 160 — per external encoder 80 — per output cam 20 — per cam track 160 — per probe 40 ● Positioning axis   — Number of positioning axes at motion control cycle of 4 ms (typical value) 5 — Number of positioning axes at motion control cycle of 8 ms (typical value) 10 Controller   ● PID_Compact Yes; Universal PID controller with integrated optimization ● PID_3Step Yes; PID controller with integrated optimization for valves ● PID-Temp Yes; PID controller with integrated optimization for temperature Counting and measuring   ● High-speed counter Yes Ambient conditions   Ambient temperature during operation   ● horizontal installation, min. 0 °C ● horizontal installation, max. 60 °C; Display: 50 °C, at an operating temperature of typically 50 °C, the display is switched off ● vertical installation, min. 0 °C ● vertical installation, max. 40 °C; Display: 40 °C, at an operating temperature of typically 40 °C, the display is switched off Ambient temperature during storage/transportation   ● min. -40 °C ● max. 70 °C Configuration   Programming   Programming language   — LAD Yes — FBD Yes — STL Yes — SCL Yes — GRAPH Yes Know-how protection   ● User program protection/password protection Yes ● Copy protection Yes ● Block protection Yes Access protection   ● Password for display Yes ● Protection level: Write protection Yes ● Protection level: Read/write protection Yes ● Protection level: Complete protection Yes Cycle time monitoring   ● lower limit adjustable minimum cycle time ● upper limit adjustable maximum cycle time Dimensions   Width 35 mm Height 147 mm Depth 129 mm Weights   Weight, approx. 430 g   更多信息 其它信息和下載內容 手冊 SIMATIC S7-1500 手冊可從網上免費下載（SIMATIC 客戶支持）。 http://support.automation.siemens.com/WW/view/en/86140384 TIA 博途 － zui重要的文檔與鏈接一覽 － 控制 https://support.industry.siemens.com/cs/en/en/view/65601780 SIMATIC S7-1500 顯示屏仿真器 使用 S7-1500 的顯示屏仿真器，可以實現熟悉顯示屏上的不同設置選項和功能。 http://www.automation.siemens.com/salesmaterial-as/interactive-manuals/getting-started_simatic-s7-1500/disp_tool/start_en.html 一般信息 http://www.siemens。。ｃｏｍ/S7-1500 SIMATIC 選型工具 http://www.siemens。。ｃｏｍ/tia-selection-tool 手冊 要下載相關的信息資料，請訪問： http://www.siemens。。ｃｏｍ/simatic/printmaterial

  全部關于 CPU 1513-1 PN 產品與解決方案在線目錄與訂購系統技術信息服務與支持與合作伙伴服務項目