上海朔川電氣設備有限公司

免費會員

您現在的位置：上海朔川電氣設備有限公司>>智能控制PLC模塊>>西門子工業電器電源6EP>> 西門子6ES71324BD000AB0

西門子6ES71324BD000AB0

參考價:	面議

參考價:

面議

具體成交價以合同協議為準

產品型號
品牌
經銷商 廠商性質
上海市 所在地

訪問次數：223更新時間：2017-11-06 15:51:52

在線詢價加入對比查看聯系方式

聯系我們時請說明是智能制造網上看到的信息，謝謝!

分享

智能控制PLC模塊

上海朔川電氣設備有限公司

免費會員·9年

聯系人：: 吉夢琪

在線咨詢給我留言

掃一掃訪問手機商鋪

產品簡介

西門子6ES71324BD000AB0

產品介紹

西門子6ES71324BD000AB0 西門子6ES71324BD000AB0

6ES7132-4BD00-0AB0

SIMATIC DP,5 Elektronikmodule 用于 ET 200S,4 DO 高特性 DC 24V/0.5A,15mm Baubr. 診斷短路,SF-LED 5 零件 je 包裝機

公司名稱：上海朔川電氣設備有限公司

聯系人：吉夢琪

：

地址：上海市金山區涇波路129號

信譽*，客戶*是公司成立之初所確立的宗旨，在公司的嚴格要求和員工們不折不扣地貫徹執行下發展延續至今。“假一罰十”一直是我公司的主動承諾。
承諾一：1、保證全新*

承諾二：2、保證安全準時發貨
承諾三：3、保證售后服務質量
流程一：1、客戶確認所需采購產品型號
流程二：2、我方會根據詢價單型號查詢價格以及交貨期，擬一份詳細正規報價單
流程三：3，客戶收到報價單并確認型號無誤后訂購產品
流程四：4、報價單負責人根據客戶提供型號以及數量擬份銷售合同
流程五：5、客戶收到合同查閱同意后蓋章回傳并按照合同銷售額匯款到公司開戶行
流程六：6、我公司財務查到款后，業務員安排發貨并通知客戶跟蹤運單

您隨口的一問多少錢，我就立馬放下筷子趕緊回話。

您隨口的一句有沒有現貨，我就立馬進去系統拼命地找。

您隨口問了問能優惠不？我就到處想辦法。

您很隨便，我卻很當真；您不知道我的回答，只為得到您的滿意..……

只因為我和您不止是客戶的關系，而是把您當我的朋友，在全力以赴做到我能做到的

您的選擇您的支持是我zui大的動力！ ————致我親愛的客戶（好朋友）

產品簡述：質保一年，一年內因產品質量問題免費更新產品不收取任何費用

哪里有賣要多少錢哪里有哪里能買到要在哪里買在哪里有賣的價格，參數，型號，哪家便宜，比較便宜，哪里有，銷售，訂貨號，多少錢？哪家價格好？廠家，性能，優點，包裝，用途，售后服務!哪里有賣代理商總代理商

數字量電子模塊

訂貨數據
附件
產品信息
組態工具

跳轉到

概述

技術規范

概述

用于 ET 200S 的 2、4 和 8 通道輸入和輸出
采用自動編碼，可插入到 TM-E 端子模板
高性能型，用于增強設備可用性、附加功能和豐富的診斷功能
可以進行模板的熱交換

技術規范

Article number	6ES7131-4BB01-0AA0	6ES7131-4BB01-0AB0	6ES7131-4BD01-0AA0	6ES7131-4BD01-0AB0	6ES7131-4BD51-0AA0	6ES7131-4BF00-0AA0
	ET200S, EL-MOD., 2DI ST, DC 24V, 5PCS.	ET200S, EL-MOD., 2DI HF, DC 24V, 5PCS.	ET200S, EL-MOD., 4DI ST., DC 24V, 5PCS.	ET200S, EL-MOD., 4DI HF, DC 24V, 5PC.	ET200S, EL-MOD., 4DI HF, DC 24V, 5PCS.	ET200S, ELEKTRONIKMODULE, 8DI DC 24V
Supply voltage
Rated value (DC)
● 24 V DC	Yes; From power module	Yes; From power module	Yes; From power module	Yes; From power module	Yes; From power module	Yes
permissible range, lower limit (DC)	20.4 V	20.4 V	20.4 V	20.4 V	20.4 V	20.4 V
permissible range, upper limit (DC)	28.8 V	28.8 V	28.8 V	28.8 V	28.8 V	28.8 V
Reverse polarity protection	Yes	Yes	Yes	Yes	Yes	Yes
Input current
from supply voltage L+, max.	Dependent on encoder	Dependent on encoder	Dependent on encoder	Dependent on encoder	Dependent on encoder	Dependent on encoder
from backplane bus 3.3 V DC, max.	10 mA	10 mA	10 mA	10 mA		10 mA
Encoder supply
Number of outputs						0; no encoder supply
Type of output voltage	min. L+ (-0.5 V), under load	min. L+ (-0.5 V), under load	min. L+ (-0.5 V), under load	min. L+ (-0.5 V), under load	max. M +0.5 V, under load
Short-circuit protection		Yes; Electronic		Yes; Electronic
Output current
● Rated value	500 mA	500 mA	500 mA	500 mA	500 mA
● permissible range, lower limit	0 mA	0 mA	0 mA	0 mA	0 mA
● permissible range, upper limit	500 mA	500 mA	500 mA	500 mA	500 mA
Power loss
Power loss, typ.	0.4 W	0.4 W	0.7 W	0.7 W	0.7 W	1.2 W
Address space per module
● with packing	2 bit	2 bit	4 bit	4 bit	4 bit
● without packing	1 byte	1 byte	1 byte	1 byte	1 byte	1 byte
Digital inputs
Number of digital inputs	2	2	4	4	4	8
Input characteristic curve in accordance with IEC 61131, type 1	Yes	Yes	Yes	Yes	Yes	Yes; 2-wire sensors connectable
Number of simultaneously controllable inputs
● Number of simultaneously controllable inputs						8
Input voltage
● Type of input voltage	DC	DC	DC	DC	DC	DC
● Rated value (DC)	24 V	24 V	24 V	24 V	24 V	24 V
● for signal "0"	-30 to +5V	-30 to +5V	-30 to +5V	-30 to +5V	-5 to +30V	-30 to +5V
● for signal "1"	+15 to +30V	+11 to +30V	+15 to +30V	+11 to +30V	-15 to -30 V	+15 to +30V
Input current
● for signal "1", typ.	7 mA; at 24 V	8 mA	7 mA; at 24 V	8 mA	7 mA; at 24 V	5 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable	No	Yes; 0.1 / 0.5 / 3 / 15 ms	No	Yes; 0.1 / 0.5 / 3 / 15 ms	No	No
— at "0" to "1", min.	2 ms; typically 3 ms	0.05 / 0.4 / 2.7 / 14.85	2 ms; typically 3 ms	0.05 / 0.4 / 2.7 / 14.85	2 ms; typically 3 ms	2 ms
— at "0" to "1", max.	4.5 ms	0,15 / 0,6 / 3,3 / 15,15	4.5 ms	0,15 / 0,6 / 3,3 / 15,15	4.5 ms	4.5 ms
— at "1" to "0", min.	2 ms; typically 3 ms	0.05 / 0.4 / 2.7 / 14.85	2 ms; typically 3 ms	0.05 / 0.4 / 2.7 / 14.85	2 ms; typically 3 ms	2 ms
— at "1" to "0", max.	4.5 ms	0,15 / 0,6 / 3,3 / 15,15	4.5 ms	0,15 / 0,6 / 3,3 / 15,15	4.5 ms	4.5 ms
Cable length
● shielded, max.	1 000 m	1 000 m	1 000 m	1 000 m	1 000 m	1 000 m
● unshielded, max.	600 m	600 m	600 m	600 m	600 m	600 m
Encoder
Connectable encoders
● 2-wire sensor	Yes	Yes	Yes	Yes	Yes	Yes
— permissible quiescent current (2-wire sensor), max.	1.5 mA	1.5 mA	1.5 mA	1.5 mA	1.5 mA	1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)						Yes; TWE = 3000 us
Interrupts/diagnostics/status information
Diagnostic functions	No	Yes	No	Yes	No	No
Alarms
● Hardware interrupt		Yes; Parameterizable
Diagnostic messages
● Short-circuit		Yes; Short-circuit of outputs to ground; module by module		Yes; Short-circuit of outputs to ground; module by module
Diagnostics indication LED
● Group error SF (red)	No	Yes	No	Yes	No
● Status indicator digital input (green)	Yes; per channel	Yes; per channel	Yes; per channel	Yes; per channel	Yes; per channel	Yes
Parameter
Remark	1 byte	3 byte	1 byte	3 byte	1 byte	3-byte parameter (not accessible for the user)
Diagnostics short-circuit		Disable / enable		Disable / enable
Potential separation
Potential separation digital inputs
● between the channels	No	No	No	No	No	No
● between the channels and backplane bus	Yes	Yes	Yes	Yes	Yes	Yes
Permissible potential difference
between different circuits	75 V DC/60 V AC	75 V DC/60 V AC	75 V DC/60 V AC	75 V DC/60 V AC	75 V DC/60 V AC	75 V DC/60 V AC
Isolation
Isolation tested with	500 V DC	500 V DC	500 V DC	500 V DC	500 V DC	500 V DC
Dimensions
Width	15 mm	15 mm	15 mm	15 mm	15 mm	15 mm
Height	81 mm	81 mm	81 mm	81 mm	81 mm	81 mm
Depth	52 mm	52 mm	52 mm	52 mm	52 mm	52 mm
Weights
Weight, approx.	35 g	35 g	35 g	35 g	35 g	35 g

Article number	6ES7131-4CD02-0AB0	6ES7131-4EB00-0AB0	6ES7131-4FB00-0AB0	6ES7131-4RD02-0AB0	6ES7131-4BF50-0AA0
	ET200S, EL-MOD., 4DI, UC 24-48V, 5 PCS	ET200S, EL-MOD., 2DI, AC 120V, 5PCS.	ET200S, EL-MOD., 2DI, AC 230V, 5PCS.	ET200S, EL-MOD., 4DI DC 24V NAMUR	ET 200S, 8 DI Source Input DC24V
Supply voltage
Rated value (DC)
● 24 V DC	Yes; From power module			Yes	Yes; From power module
permissible range, lower limit (DC)	24 V			20.4 V	20.4 V
permissible range, upper limit (DC)	48 V			28.8 V	28.8 V
Rated value (AC)
● 24 V AC	Yes
● 120 V AC		Yes; From power module
● 230 V AC			Yes
permissible range, lower limit (AC)	24 V	102 V	192 V
permissible range, upper limit (AC)	48 V	144 V	264 V
Reverse polarity protection	Yes; AC or DC automatic				Yes
Input current
from supply voltage L+, max.	Dependent on encoder				Dependent on encoder
from supply voltage L1, max.		Dependent on encoder	Dependent on encoder
from backplane bus 3.3 V DC, max.	10 mA	6 mA	6 mA
Encoder supply
Number of outputs				1
Type of output voltage	min. L+ (-0.5 V), under load			min. 8.2 V, loaded
Short-circuit protection	Yes; per module			Yes; Electronic
Output current
● Rated value	500 mA			45 mA
● permissible range, lower limit	0 mA
● permissible range, upper limit	500 mA
Power loss
Power loss, typ.	0.7 W	0.5 W	0.7 W	1.6 W	1.2 W
Address space per module
● with packing	4 bit	2 bit	2 bit	4 bit
● without packing	1 byte	1 byte	1 byte	1 byte
Digital inputs
Number of digital inputs	4	2	2	4	8
Number of NAMUR inputs				4
Parallel switching of inputs				No
Input characteristic curve in accordance with IEC 61131, type 1	Yes	Yes	Yes		Yes
Number of simultaneously controllable inputs
● Number of simultaneously controllable inputs				4
Input voltage
● Type of input voltage	AC/DC	AC	AC	DC	DC
● Rated value (DC)					24 V
● Rated value (AC)		120 V; 47 ... 63 Hz	230 V; 47 ... 63 Hz
● Rated value (UC)	24 V; 24 ... 48 V UC (47 ... 63 Hz)
● for signal "0"	-6 to +6 V DC/ 0 to 5 V AC	0V AC to 20V AC	0V AC to 40V AC		-5 to +30V
● for signal "1"	-15 V DC to -57.6 V DC; 15 V DC to 57.6 V DC; 15 V AC to 48 V AC	79 to 132 V AC	164V AC to 264V AC		-15 to -30 V
Input current
● for signal "1", typ.	10 mA; 4 to 10 mA	3 mA; 3 to 9 mA	5 mA; 5 to 15mA		6 mA; at 24 V
for 10 k switched contact
— for signal "0"				0.35 to 1.2 mA
— for signal "1"				2.1 to 7 mA
for unswitched contact
— for signal "0", max. (permissible quiescent current)				0.5 mA
— for signal "1"				typ. 8 mA
for NAMUR encoders
— for signal "0"				0.35 to 1.2 mA
— for signal "1"				2.1 to 7 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable					No
— at "0" to "1", min.		15 ms	15 ms		2 ms
— at "0" to "1", max.	15 ms			4.6 µs	4.5 ms
— at "1" to "0", min.		25 ms	45 ms		2 ms
— at "1" to "0", max.	15 ms			4.6 µs	4.5 ms
Encoder connection
● Fixed current limitation for wire-break monitoring, min.	18 k?; Rated voltage 24 V (15 V to 35 V); rated voltage 48 V (30 V to 60 V): 39 kohms
Cable length
● shielded, max.	1 000 m	1 000 m	1 000 m	200 m	1 000 m
● unshielded, max.	600 m	600 m	600 m		600 m
Encoder
Connectable encoders
● 2-wire sensor	Yes	No	No		Yes
— permissible quiescent current (2-wire sensor), max.	2 mA; (0.5 to 2 mA), a minimum load current is necessary for wire break diagnostics.	1 mA	2 mA		1.5 mA
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	No	No		Yes
Interrupts/diagnostics/status information
Diagnostic functions	Yes; Parameterizable	No	No	Yes; Diagnostic alarm	No
Alarms
● Diagnostic alarm				Yes; can be set
● Hardware interrupt				No
Diagnostic messages
● Diagnostic information readable				Yes
● Wire-break	Yes			Yes
● Short-circuit		No	No
Diagnostics indication LED
● Group error SF (red)	Yes			Yes	No
● Status indicator digital input (green)	Yes; per channel	Yes; per channel	Yes; per channel	Yes; per channel	Yes; per channel
Parameter
Remark		3 byte	3 byte	12 byte	3 byte
Potential separation
Potential separation digital inputs
● between the channels	No	No	No	No	No
● between the channels and backplane bus	Yes	Yes	Yes	Yes	Yes
● Between the channels and load voltage L+				Yes
Permissible potential difference
between different circuits	75 V DC/60 V AC			75 V DC/60 V AC	75 V DC/60 V AC
between M internally and the inputs		1500 V AC	1500 V AC
Isolation
Isolation tested with	2500 V DC	2500 V DC	4 000 V DC	500 V DC	500 V DC
Dimensions
Width	15 mm	15 mm	15 mm	15 mm	15 mm
Height	81 mm	81 mm	81 mm	81 mm	81 mm
Depth	52 mm	52 mm	52 mm	52 mm	52 mm
Weights
Weight, approx.	35 g	31 g	31 g	35 g	35 g

Article number	6ES7132-4BB01-0AB0	6ES7132-4BB01-0AA0	6ES7132-4BB31-0AB0	6ES7132-4BB31-0AA0	6ES7132-4BD00-0AB0	6ES7132-4BD02-0AA0
	ET200S, EL-MOD., 2DO HF,DC24V, 0.5A, 5PC	ET200S, EL-MOD., 2DO ST,DC24V, 0.5A, 5PC	ET200S, EL-MOD., 2DO HF, DC 24V, 2A, 5PC	ET200S, EL-MOD., 2DO ST, DC 24V, 2A, 5PC	ET200S, EL-MOD., 4DO HF,DC24V, 0.5A,5PCS	ET200S, EL-MOD., 4DO ST,DC24V, 0.5A,5PCS
Supply voltage
Reverse voltage protection	Yes; when using the same load voltage as on the power module	Yes; when using the same load voltage as on the power module	Yes; when using the same load voltage as on the power module	Yes; when using the same load voltage as on the power module	Yes; when using the same load voltage as on the power module	Yes; when using the same load voltage as on the power module
Load voltage L+
● Rated value (DC)	24 V; From power module	24 V; From power module	24 V; From power module	24 V; From power module	24 V; From power module	24 V; From power module
● Reverse polarity protection	Yes; polarity reversal can lead to the digital outputs being connected through	Yes; polarity reversal can lead to the digital outputs being connected through	Yes; polarity reversal can lead to the digital outputs being connected through	Yes; polarity reversal can lead to the digital outputs being connected through	Yes; polarity reversal can lead to the digital outputs being connected through	Yes; polarity reversal can lead to the digital outputs being connected through
Input current
from load voltage L+ (without load), max.	5 mA; Per channel	5 mA; Per channel	5 mA; Per channel	5 mA; Per channel	5 mA; Per channel	10 mA; Per channel
from backplane bus 3.3 V DC, max.	10 mA	10 mA	10 mA	10 mA	10 mA	10 mA
Power loss
Power loss, typ.	0.4 W	0.4 W	1.4 W	1.4 W	0.8 W	0.8 W
Address area
Address space per module
● with packing	2 bit	2 bit	2 bit	2 bit	4 bit	4 bit
● without packing	1 byte	1 byte	1 byte	1 byte	1 byte	1 byte
Digital outputs
Number of digital outputs	2	2	2	2	4	4
Short-circuit protection	Yes	Yes	Yes	Yes	Yes	Yes
● Response threshold, typ.	1.5 A	0.7 to 1.8 A	4 A	2.8 to 7.2 A	0.7 to 1.5 A	1 to 1.5 A
Limitation of inductive shutdown voltage to	-55 to -60 V, typ. L+( )	-55 to -60 V, typ. L+( )	-55 to -60 V, typ. L+( )	-55 to -60 V, typ. L+( )	-55 to -60 V, L+( )	L+ (-55 to -60 V)
Controlling a digital input	Yes	Yes	Yes	Yes	Yes	Yes
Switching capacity of the outputs
● on lamp load, max.	2.5 W	5 W	5 W	10 W	5 W	5 W
Load resistance range
● lower limit	48 ?	48 ?	12 ?	12 ?	48 ?	48 ?
● upper limit	3 400 ?	3 400 ?	3 400 ?	3 400 ?	3 400 ?	3 400 ?
Output voltage
● for signal "1", min.	L+ (-1 V)	L+ (-1 V)	L+ (-1 V)	L+ (-1 V)	L+ (-1 V)	L+ (-1 V)
Output current
● for signal "1" rated value	0.5 A	0.5 A	2 A	2 A	0.5 A	0.5 A
● for signal "1" permissible range, min.	7 mA	7 mA	7 mA	7 mA	7 mA	7 mA
● for signal "1" permissible range, max.	600 mA	600 mA	2.4 A	2.4 A	600 mA	600 mA
● for signal "0" residual current, max.	0.3 mA	0.3 mA	0.5 mA	0.5 mA	0.3 mA	0.3 mA
Output delay with resistive load
● "0" to "1", max.	100 µs	200 µs	100 µs	200 µs	100 µs	50 µs
● "1" to "0", max.	400 µs	1.3 ms	400 µs	1.3 ms	300 µs	120 µs
Parallel switching of two outputs
● for uprating	No	No	No	No	No	No
● for redundant control of a load	Yes; per module	Yes; per module	Yes; per module	Yes; per module	Yes; per module	Yes; per module
Switching frequency
● with resistive load, max.	100 Hz	100 Hz	100 Hz	100 Hz	100 Hz	800 Hz
● with inductive load, max.	2 Hz	2 Hz	2 Hz; 0,5 H	2 Hz; 0,5 H	2 Hz	2 Hz
● on lamp load, max.	10 Hz	10 Hz	10 Hz	10 Hz	10 Hz	10 Hz
Total current of the outputs
● Current per module, max.	1 A	1 A	4 A	4 A	2 A	2 A
Cable length
● shielded, max.	1 000 m	1 000 m	1 000 m	1 000 m	1 000 m	1 000 m
● unshielded, max.	600 m	600 m	600 m	600 m	600 m	600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	No	Yes	No	Yes	Yes
Interrupts/diagnostics/status information
Diagnostic functions	Yes	No	Yes	No	Yes	No
Substitute values connectable	Yes; 0/1		Yes; 0/1
Diagnostic messages
● Diagnostic information readable	Yes		Yes
● Wire-break	Yes; channel by channel		Yes; channel by channel
● Short-circuit	Yes; channel by channel		Yes; channel by channel		Yes; Module-wise
Diagnostics indication LED
● Group error SF (red)	Yes		Yes		Yes
● Status indicator digital output (green)	Yes	Yes	Yes	Yes	Yes; Per channel	Yes
Parameter
Remark	3 byte	1 byte	3 byte	1 byte	3 byte	1 byte
Diagnostics wire break	Disable / enable		Disable / enable
Diagnostics short-circuit	Disable / enable		Disable / enable
Response to CPU/master STOP	Substitute a value/keep last value		Substitute a value/keep last value
Potential separation
Potential separation digital outputs
● between the channels	No	No	No	No	No	No
● between the channels and backplane bus	Yes	Yes	Yes	Yes	Yes	Yes
Isolation
Isolation tested with	500 V DC	500 V DC	500 V DC	500 V DC	500 V DC	500 V DC
Dimensions
Width	15 mm	15 mm	15 mm	15 mm	15 mm	15 mm
Height	81 mm	81 mm	81 mm	81 mm	81 mm	81 mm
Depth	52 mm	52 mm	52 mm	52 mm	52 mm	52 mm
Weights
Weight, approx.	40 g	40 g	40 g	40 g	40 g	40 g

Article number	6ES7132-4BF00-0AB0	6ES7132-4BF00-0AA0
	ET200S, ELECTR.MODULE 8DO HF DC24V/0,5A	ET200S, ELEKTRONIKMODULE 8DO DC24V/0,5A
Supply voltage
Reverse voltage protection	Yes; when using the same load voltage as on the power module	Yes
Load voltage L+
● Rated value (DC)	24 V; From power module	24 V
● Reverse polarity protection	Yes; polarity reversal can lead to the digital outputs being connected through	Yes
Input current
from load voltage L+ (without load), max.	5 mA; Per channel	5 mA; Per channel
from backplane bus 3.3 V DC, max.	10 mA	10 mA
Power loss
Power loss, typ.	1.5 W	1.5 W
Address area
Address space per module
● without packing	1 byte	1 byte
Digital outputs
Number of digital outputs	8	8
Short-circuit protection	Yes	Yes
● Response threshold, typ.	0.7 to 1.9 A	1.5 A
Limitation of inductive shutdown voltage to	L+ -(47 to 60 V)	Typ. L+ (-55 to -60 V)
Controlling a digital input	Yes	Yes
Switching capacity of the outputs
● on lamp load, max.	5 W	5 W
Load resistance range
● lower limit	48 ?	48 ?
● upper limit	3 400 ?	3 400 ?
Output voltage
● for signal "1", min.	L+ (-1.0 V)	L+ (-1.0 V)
Output current
● for signal "1" rated value	0.5 A	0.5 A
● for signal "1" permissible range, min.	7 mA	7 mA
● for signal "1" permissible range, max.	600 mA	600 mA
● for signal "0" residual current, max.	0.3 mA	0.3 mA
Output delay with resistive load
● "0" to "1", max.	300 µs	300 µs
● "1" to "0", max.	600 µs	600 µs
Parallel switching of two outputs
● for uprating	No	No
● for redundant control of a load	Yes; per module	Yes
Switching frequency
● with resistive load, max.	100 Hz	100 Hz
● with inductive load, max.	2 Hz	2 Hz
● on lamp load, max.	10 Hz	10 Hz
Total current of the outputs
● Current per module, max.	4 A	4 A
Cable length
● shielded, max.	1 000 m	1 000 m
● unshielded, max.	600 m	600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	Yes; jitter incumbered < 100us
Interrupts/diagnostics/status information
Diagnostic functions	Yes	No
Diagnostic messages
● Diagnostic information readable	Yes
● Short-circuit	Yes; Module-wise
Diagnostics indication LED
● Group error SF (red)	Yes
● Status indicator digital output (green)	Yes; Per channel	Yes
Parameter
Remark	1 byte	3-byte parameter (not accessible for the user)
Potential separation
Potential separation digital outputs
● between the channels	No	No
● between the channels and backplane bus	Yes	Yes
Isolation
Isolation tested with	500 V DC	500 V DC
Dimensions
Width	15 mm	15 mm
Height	81 mm	81 mm
Depth	52 mm	52 mm
Weights
Weight, approx.	40 g	40 g

Article number	6ES7132-4BD30-0AB0	6ES7132-4BD32-0AA0	6ES7132-4FB01-0AB0	6ES7132-4HB01-0AB0	6ES7132-4HB12-0AB0
	ET200S, EL-MOD., 4DO HF, DC24V, 2A, 5PCS	ET200S, EL-MOD., 4DO ST, DC24V, 2A, 5PCS	ET200S, ELECT. MOD., 2DO, AC 230V, 5PCS	ET200S, EL-MOD., 2RO. DC24VAC230V,5A,5PC	ET200S, EL-MOD., 2RO,DC48V/AC230V,5A,5PC
Supply voltage
Reverse voltage protection	Yes; when using the same load voltage as on the power module	Yes; when using the same load voltage as on the power module	Yes; when using the same load voltage as on the power module
Load voltage L+
● Rated value (DC)	24 V; From power module	24 V; From power module		24 V; From power module	24 V; From power module
● Reverse polarity protection	Yes; polarity reversal can lead to the digital outputs being connected through	Yes		Yes	Yes
Load voltage L1
● permissible range, lower limit (AC)			24 V; From power module
● permissible range, upper limit (AC)			230 V
● permissible frequency range, lower limit			47 Hz
● permissible frequency range, upper limit			63 Hz
Input current
from load voltage L+ (without load), max.	5 mA; Per channel	10 mA; Per channel		30 mA	30 mA
from load voltage L1 (without load), max.			15 mA; Per channel
from backplane bus 3.3 V DC, max.	10 mA	10 mA	18 mA	10 mA	10 mA
Power loss
Power loss, typ.	1.6 W	1.6 W		0.6 W	0.6 W
Power loss, max.			4 W
Address area
Address space per module
● with packing	4 bit	4 bit	2 bit	2 bit	2 bit
● without packing	1 byte	1 byte	1 byte	1 byte	1 byte
Digital outputs
Number of digital outputs	4	4	2	2	2
Short-circuit protection	Yes	Yes	Yes	No	No
● Response threshold, typ.	5 to 10 A	2.8 to 7.2 A
Limitation of inductive shutdown voltage to	L+ -(37 to 41V)	Typ. L+ (-55 to -60 V)	-55 to -60 V	No	No
Controlling a digital input	Yes	Yes	Yes; possible	Yes	Yes
Switching capacity of the outputs
● on lamp load, max.		10 W	100 W
Load resistance range
● lower limit	12 ?	12 ?
● upper limit	3 400 ?	3 400 ?
Output voltage
● for signal "1", min.	L+ (-1.0 V)	L+ (-1.0 V)	L+ (-1.5 V)
Output current
● for signal "1" rated value	2 A	2 A	2 A	5 A	5 A
● for signal "1" permissible range, min.	7 mA	7 mA	0.1 mA
● for signal "1" permissible range, max.	2.4 A	2.4 A	2.2 A
● for signal "1" minimum load current				8 mA	8 mA
● for signal "0" residual current, max.	0.5 mA	0.1 mA	3 mA
Output delay with resistive load
● "0" to "1", max.	250 µs	50 µs; Typ. 45 µs	15 ms
● "1" to "0", max.	400 µs	120 µs; Typ. 90 µs	15 ms
Parallel switching of two outputs
● for uprating	No	No	No
● for redundant control of a load	Yes; per module	Yes; per module	Yes; per module
Switching frequency
● with resistive load, max.	100 Hz	1 000 Hz	10 Hz	2 Hz	2 Hz
● with inductive load, max.	2 Hz	2 Hz; At 0.5 H	0.5 Hz	0.5 Hz	0.5 Hz
● on lamp load, max.	10 Hz	10 Hz	1 Hz	2 Hz	2 Hz
Total current of the outputs
● Current per module, max.	4 A	4 A	2 A; Note derating data in the manual
Relay outputs
Switching capacity of contacts
— Thermal continuous current, max.				5 A	5 A
Cable length
● shielded, max.	1 000 m	1 000 m	1 000 m	1 000 m	1 000 m
● unshielded, max.	600 m	600 m	600 m	600 m	600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	Yes		No	No
Interrupts/diagnostics/status information
Diagnostic functions	Yes	No	No	No	No
Substitute values connectable				Yes; 0/1	Yes; 0/1
Diagnostic messages
● Short-circuit	Yes; Module-wise
Diagnostics indication LED
● Group error SF (red)	Yes; SF-LED (red)
● Status indicator digital output (green)	Yes; Per channel	Yes	Yes	Yes	Yes
Parameter
Remark		1 byte	3 byte
Response to CPU/master STOP			Substitute a value/keep last value, 0/1	Substitute a value/keep last value	Substitute a value/keep last value
Potential separation
Potential separation digital outputs
● between the channels	No	No	No	Yes	Yes
● between the channels and backplane bus	Yes	Yes	Yes	Yes	Yes
● Between the channels and load voltage L+				Yes	Yes
Isolation
Isolation tested with	500 V DC	500 V DC	2500 V DC
tested with
● Channels against backplane bus and load voltage L+				1500 V AC	1500 V AC
● Load voltage L+ against backplane bus				500 V DC	500 V DC
Altitude during operation based on sea level
● Ambient air temperature-barometric pressure-altitude				Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)	Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Dimensions
Width	15 mm	15 mm	15 mm	15 mm	15 mm
Height	81 mm	81 mm	81 mm	81 mm	81 mm
Depth	52 mm	52 mm	52 mm	52 mm	52 mm
Weights
Weight, approx.	40 g	40 g	37 g	50 g	50 g

Article number	6ES7132-4BF50-0AA0	6ES7132-4BD50-0AA0	6ES7132-4HB50-0AB0
	ET200S, 8DO SINK OUTPUT DC24V/0,5A	ET200S,4DO SINK OUTPUT DC24V/0,5A , 5PCS	ET200S,2RO,DC48V/AC230V,MANUAL ACTUATION
Supply voltage
Reverse voltage protection	Yes; when using the same correctly polarized load voltage as on the power module	Yes; when using the same load voltage as on the power module
Load voltage L+
● Rated value (DC)	24 V; From power module	24 V; From power module	24 V; From power module
● Reverse polarity protection	Yes	Yes	Yes
Input current
from load voltage L+ (without load), max.	5 mA	5 mA; Per channel	30 mA
from backplane bus 3.3 V DC, max.	10 mA	10 mA	10 mA
Power loss
Power loss, typ.	1.5 W	0.8 W	0.6 W
Address area
Address space per module
● with packing		4 bit	2 bit
● without packing	1 byte	1 byte	1 byte
Digital outputs
Number of digital outputs	8	4	2
Short-circuit protection	Yes	Yes	No
● Response threshold, typ.	1.5 A
Limitation of inductive shutdown voltage to	Typ. 47 V		No
Controlling a digital input	Yes	Yes	Yes
Switching capacity of the outputs
● on lamp load, max.	5 W	5 W
Load resistance range
● lower limit	48 ?	48 ?
● upper limit	3 400 ?	3 400 ?
Output voltage
● for signal "1", min.	Max. 1 V	1 V
Output current
● for signal "1" rated value	0.5 A	0.5 A	5 A
● for signal "1" permissible range, min.	5 mA	5 mA
● for signal "1" permissible range, max.	600 mA	600 mA
● for signal "1" minimum load current			8 mA
● for signal "0" residual current, max.	5 µA	5 µA
Output delay with resistive load
● "0" to "1", max.	300 µs	300 µs
● "1" to "0", max.	600 µs	600 µs
Parallel switching of two outputs
● for uprating	No	No
● for redundant control of a load	Yes; per module	Yes; per module
Switching frequency
● with resistive load, max.	100 Hz	100 Hz	2 Hz
● with inductive load, max.	0.5 Hz	0.5 Hz	0.5 Hz
● on lamp load, max.	10 Hz	10 Hz	2 Hz
Total current of the outputs
● Current per module, max.	4 A	2 A
Relay outputs
Switching capacity of contacts
— Thermal continuous current, max.			5 A
Cable length
● shielded, max.	1 000 m	1 000 m	1 000 m
● unshielded, max.	600 m	600 m	600 m
Isochronous mode
Isochronous operation (application synchronized up to terminal)	Yes	Yes	No
Interrupts/diagnostics/status information
Diagnostic functions	No	No	No
Substitute values connectable			Yes; 0/1
Diagnostics indication LED
● Status indicator digital output (green)	Yes	Yes	Yes
Parameter
Remark	3 byte	1 byte
Response to CPU/master STOP			Substitute a value/keep last value
Potential separation
Potential separation digital outputs
● between the channels	No	No	Yes
● between the channels and backplane bus	Yes	Yes	Yes
● Between the channels and load voltage L+			Yes
Isolation
Isolation tested with	500 V DC	500 V DC
tested with
● Channels against backplane bus and load voltage L+			1500 V AC
● Load voltage L+ against backplane bus			500 V DC
Altitude during operation based on sea level
● Ambient air temperature-barometric pressure-altitude			Tmin ... Tmax at 1080 hPa ... 795 hPa (-1000 m ... +2000 m) // Tmin ... (Tmax - 10K) at 795 hPa ... 658 hPa (+2000 m ... +3500 m) // Tmin ... (Tmax - 20K) at 658 hPa ... 540 hPa (+3500 m ... +5000 m)
Dimensions
Width	15 mm	15 mm	15 mm
Height	81 mm	81 mm	81 mm
Depth	52 mm	52 mm	52 mm
Weights
Weight, approx.	40 g	40 g	50 g