General information

HW functional status

E03

Firmware version

V1.1.x

Product function

• ● I&M data

Yes; I&M0 to I&M3

Engineering with

• ● STEP 7 TIA Portal configurable/integrated as of version

STEP 7 V15 or higher

• ● STEP 7 configurable/integrated as of version

From V5.5 SP4 Hotfix 3

• ● PROFIBUS as of GSD version/GSD revision

GSD as of Revision 5

• ● PROFINET as of GSD version/GSD revision

GSDML V2.3.1

Supply voltage

Load voltage 1L+

• ● Rated value (DC)

24 V

• ● permissible range, lower limit (DC)

20.4 V

• ● permissible range, upper limit (DC)

28.8 V

• ● Reverse polarity protection

Yes

Load voltage 2L+

• ● Rated value (DC)

24 V

• ● permissible range, lower limit (DC)

20.4 V

• ● permissible range, upper limit (DC)

28.8 V

• ● Reverse polarity protection

Yes; against destruction; load increasing

Input current

Current consumption (rated value)

40 mA; without load

from load voltage 1L+ (unswitched voltage)

4 A; Maximum value

from load voltage 2L+, max.

4 A; Maximum value

Encoder supply

Number of outputs

4

24 V encoder supply

• ● Short-circuit protection

Yes; per module, electronic

• ● Output current, max.

1.4 A; Total current of all ports

Power loss

Power loss, typ.

2.6 W

IO-Link

Number of ports

4

• ● of which simultaneously controllable

4

IO-Link protocol 1.0

Yes

IO-Link protocol 1.1

Yes

Transmission rate

4.8 kBaud (COM1); 38.4 kBaud (COM2), 230 kBaud (COM3)

Size of process data, input per port

32 byte

Size of process data, input per module

32 byte

Size of process data, output per port

32 byte

Size of process data, output per module

32 byte

Memory size for device parameter

2 kbyte; for each port

Master backup

Possible with function block IO_LINK_MASTER

Configuration without S7-PCT

Possible; autostart/manual function

Cable length unshielded, max.

20 m

Operating modes

• ● IO-Link

Yes

• ● DI

Yes

• ● DQ

Yes; max. 100 mA

Connection of IO-Link devices

• ● Port type A

Yes; via 3-core cable

• ● Port type B

Yes; Additional device supply: 1.6 A total current of all ports

Interrupts/diagnostics/status information

Alarms

• ● Diagnostic alarm

Yes; Parameterizable

Diagnostic messages

• ● Monitoring the supply voltage

Yes

• ● Wire-break

Yes

• ● Short-circuit

Yes

Diagnostics indication LED

• ● Channel status display

Yes; Green LED

• ● for module diagnostics

Yes; Green/red LED

• ● For load voltage monitoring

Yes; Green LED

Potential separation

between the load voltages

Yes

Potential separation channels

• ● between the channels

No

• ● between the channels and backplane bus

Yes

• ● between the channels and the power supply of the electronics

No

Isolation

Isolation tested with

707 V DC (type test)

Degree and class of protection

IP degree of protection

IP65/67

Standards, approvals, certificates

Suitable for safety-oriented group deactivation

Yes

Highest safety class achievable in safety mode

• ● Performance level according to ISO 13849-1

PL d

• ● SIL acc. to IEC 61508

SIL 2

Ambient conditions

Ambient temperature during operation

• ● min.

-25 °C

• ● max.

55 °C

Connection method

Design of electrical connection for the inputs and outputs

M12, 5-pole

Power supply

M8, 4-pole

ET-Connection

• ● ET-Connection

M8, 4-pin, shielded

Dimensions

Width

30 mm

Height

159 mm

Depth

40 mm

Weights

Weight, approx.

145 g