窗體底端

Specification

1.All specifications valid at nominal input voltage,full load and +25°C after warm-up time unless otherwise stated.
2.Measured with 0.1U 50V // 47U 50V Ceramic Cap. Cross to output

    Input Specification

    Characteristics

    Conditions

    Voltage Range

    2:1 Range:

  9 ~ 18 VDC
  18 ~ 36 VDC
  36 ~ 75 VDC

    Filter

     type

   Output Specification

    Characteristics

    Conditions

    Output Power

    40 Watt  (max.)

    Voltage Accuracy
    (Full Load and Nominal Vin)

    Single:

  ±2%

    Dual:

  ±2%

    Triple:

  ±2% / ±5%

    Minimum Load     (at Full Load)

     to 1

    Line Regulation    
    (1 to 10 at Full Load)

    Single:

  ±0.5%

(typ.)

    Dual:

  ±0.5%

    Triple:

  ±1% / ±5%

    Load Regulation     
    (1 to 10 at Full Load) 
     
    

    Single:

  ±1%

(typ.)

    Dual:

  ±2%

    Triple:

  ±3% / ±5%

    Ripple    (20MHz bandwidth)

    1.8S~5S:50mV (Vp-p)

(max.)

    others:1% Vout

    Noise    (20MHz bandwidth)

    1.8S~5S:100mV (Vp-p)

(max.)

    others:1% Vout

    Temperature Coefficient

    ±0.02% / °C  (max.)

    Short Circuit Protection

    Hiccup mode, Auto-recovery

   General Specification

    Characteristics

    Conditions

    Switching Frequency

    5V Output:250KHz / 12V Input:200KHz / others:400KHz  (typ.)

    Isolation Voltage  (Input to Output)

    1600 VDC  (min.)

    Operating Temperature

    -25 °C to +70°C  (with derating)

    Storage Temperature

    -55°C to +105°C

    Humidity

    95% RH  (max.)

    Cooling

    Free air convection

   Physical Specification

    Characteristics

    Conditions

    Dimension    (Tolerance ±0.5)

    50.8 x 50.8 x 11.4 mm

    2.0 x 2.0 x 0.45 inches

    Weight

    70 g

    Case Material

    Five-side shielded Aluminum with Non-Conductive base, Black Anodize