burkert寶德比例閥8605burkert178357
電子設備會將一個外部標準信號轉換成一個經過脈寬調制 (PWM) 的信號,利用該轉換信號可以對比例閥開口尺寸進行無級調節,進而調節流體輸出變量(例如流量)。率特性愈高(即對頻率響應的靈敏度愈高),控制性能就愈好。但必須注意:頻率特性應采用穩定的實驗方法而非理論方法來確定,并且在評估測定頻率特性時,應將閥門定位器和執行機構合并起來考慮。The higher the rate characteristic (the higher the sensitivity to the frequency response), the better the control performance. But must pay attention to: frequency stability experiment method should be adopted instead of theoretical method to determine, and in the measurement of frequency characteristic, valve positioner and actuator should be combined to consider.
burkert寶德比例閥8605burkert178357
螺釘端子 端子 11 10 14 13 12* 13* 9* 8* 5* 6* 7* 配置
設定值 + (0/4 ... 20 mA / 0 ... 5/10 V) 設定值 GND 工作電源 + 24 V DC 工作電源 GND 二進制輸入 + 二進制輸入 GND 模擬位置反饋 + 模擬位置反饋 GND 二進制輸出 1 二進制輸出 GND 二進制輸出 2。 value GND job power + 24 V DC power GND binary input + binary input GND position feedback + simulation position feedback GND binary output 1 binary output GND binary output 2
更多的寶德產品信息歡迎您隨時與我們。