智能制造網
詳細介紹
To measure volumetric flowrate for conductive liquids and pulps. Several output signals are available. |
For conductive liquids (>5μS/cm), even | 85÷265Vac, 24Vac or 24Vdc power supply | ||
with a content of suspended solids. | 4÷20mA, pulse and alarm output | ||
Range from <0,1m3/h to>70000m3/h | Soft rubber or PTFE lining material | ||
MODBUS RTU, PROFIBUS orHART | (FEP for DN10 only) | ||
communication protocol (opt.) | SS316, Hasloy B, Hasloy C, | ||
Best measurement accuracy ±0.2% | Titanium and Tantalum electrodes |
- Technical Data
Pipe dimension range | DN10÷ DN1600 |
Measure range | <0,6m3/h ÷ >70000m3/h |
Fluid conductivity | >5μS/cm |
Sensor material | SS321 |
Lining materials: | rubber; PTFE; FEP |
Housing material | aluminum |
Electrodes materials | SS 316 Hasloy B; Hasloy C; Titanium; Tantalium |
Remote version operating temp. | rubber <80°C; FEP <100°C; PTFE <150°C (180°C peak value) |
Compact version operating temp. | <70°C |
Max. accuracy. | ±0,5% standard; ±0,2% opt. |
Max. repeatability | ±0,07% |
Fluid velocity | 0m/s ÷ 10m/s |
Open-collector output | 30V; 250mA |
Analog output | 4÷20mA; max. load 750Ω |
Protocol communication | RS485 (opt.); MODBUS RTU (opt.); PROFIBUS DP (opt.); HART (opt.) |
Pulse output | 1÷5000Hz |
Power supply | 85÷265Vac, 24Vac o 24Vdc |
Consumption | <20W |
Protection compact version | IP67 with 2 cable gland M20x1,5 for elect. connection |
Protection remote version | IP67 / IP68 only pipe (opt.) with 4 cable gland M16x1,5 for connecting the electronic unit to the measurement pipe with 2 cable gland M20x1,5 for electrical connection |
智能制造網