杭州具新科技有限公司
靜電消除器GKA75+靜電消除棒KDA75
該靜電消除電源是一種高壓發生器,是產生活躍電離子的一種裝置.它可以驅動一臺或兩臺離子風扇. 設置簡單,操作容易.可接一臺以上的靜電棒.設備內部有保護卡裝置防止短路. 如發生短路,電源和輸出裝置之間的電流將被切斷,保護電源內部的變壓器的安全,延長變壓器的壽命
Power Supply is source with high voltage generator designed for devices of active ionization. Its set-up and operation is simple in use and does not need any additional care. It is possible to supply the operation for more than one static bar.
擁有高的設計該電源能提供更高效的靜電解決方案,尤其應用于高速設備。電源不需要校準,容易清洗和維護。
使用該靜電消除電源可讓您的生產更清潔、安全、高效。電源尺寸可定制,以滿足各種設備的不同需求
There is a protection card inside of Power Supply for the system security in case of short circuit. Power Supply cuts down current and disables circuit in connected to it high voltage cable of ionization devices or ionizer. That provides longer life and safety to the transformer, what is inside of power supply.
General Specification常規性能
Easy to install / High performance / Safety / Long life
易安裝/高效/安全/長壽命
Applications應用
Coating涂層 / Laminating層壓 / Plastic bag塑料袋 / Sheeting薄膜 / Slitting分切 / Rewind繞線機 / Form fill seal填充密封
/ Stretch wrapping拉伸包裝 / Wrapping machines 整經機/ Paper production紙張制造 / Blown film吹塑薄膜, cast film 流延膜/ Extrusion擠壓, flexo sheet印片 / Inkjet噴墨, laser激光 / Folding折疊
比國內大多數同類產品電壓更高,消除靜電時間更快.
Main Voltage電壓 | 220-230 VAC / 110V AC |
Main Frequency主頻率 | 50 / 60 Hz |
Main Connection接線 | IEC-320 Europe Type |
Fuse保險絲 | 160 m AT/A |
Output Voltage輸出電壓 | 7.5 k VAC |
Max Output輸出電流 | Less than 5 mA |
Connections連接口 | 4個 |
Ambient Temperature使用溫度 | 0 - 60 C |
Weight重量 | 3.2 Kg |
Dimensions尺寸 | 127.5 x 260 x 100 mm (width x height x length) |
Approval認證 | CE |
Due to high technologically design used in Anti-static bar it became possible to produce more efficient results to solve the static troubles, even in high-speed applications. Anti-static bar do not need any calibration and can be cleaned and cared easily. It was designed to neutralize destructive static charges during manufacturing. Using Anti-static bar will supply machines to perform hygienic, safe and qualitative production. Anti-static bar can be designed in different lengths to satisfy the requirements of needs of application.
高科技設計的抗靜電棒能更有效地解決高速設備的靜電問題. 抗靜電棒不需要任何校準,易清潔易維護. 該設計主要用于中和生產過程中所產生的破壞性靜電. 使用抗靜電棒可讓您的設備更衛生,安全,讓你生產的產品質量更好. 抗靜電棒可設計成不同的長度以滿足設備的不同需求.
Antistatic bar separates the air molecules to positive and negative ions. Due to principle of work of antistatic bar the neutralization of material became possible. It attracts in effective range the opposite charged ions of any statically charged product. That hinders the sticking of products to each other or to parts of machine. In addition, such electrical dangers as current striking, explosion, fire, dust attraction will be also prevented. Anti-static bar does not need any calibration and because of being simple in care enhances the quality, safety, hygiene of machine and provides its longer life.
抗靜電棒將空氣分離成正電和負電粒子. 通過靜電棒的運用,可很好的中和材料中的靜電. 它可有效吸引產品中所帶的相反的電荷粒子. 可阻止產品之間的粘連或者產品與設備的粘連. 另外,諸如觸電,爆炸,火災和吸塵等危險都可以成功避免. 抗靜電離子風槍不需要任何校準! 容易維護和操作! 并能提高您的設備的質量,安全性,衛生度,延長機器壽命.
Anti-static bar is connected to high voltage resistively. Thereby its emitter pins even if they are touched will not affect by electrical current. It can be installed in restricted places. According to application it can be produced in different length.
抗靜電棒連接高壓電源
General Specification
Easy to install / High performance / Safety / Long life
規格:
快速衰減時間/人體工學設計/易使用
Applications
Coating / Laminating / Plastic bag / Sheeting / Slitting / Rewind / Form fill seal / Stretch wrapping / Wrapping machines / Paper production / Blown film, cast film / Extrusion, flexo sheet / Inkjet, laser / Folding
應用:
涂層/復合/塑料袋/片狀/分條/繞帶/填充密封/纏繞膜包裝機/包裝機/造紙生產/吹塑薄膜,流延膜/擠出,柔印片/噴墨,激光/折疊
Operating Voltage | 7.5 kV AC | |
Main Frequency | 50 / 60 Hz | |
High Voltage Supply | Puls Power Supply Model 1 | |
Max. Output Current | Less Than 5mA | |
Length | Any size from 100mm to 4000mm | |
Construction | Aluminium and PVC | |
Emitters | Stainless 304 | |
Max Operating Distance | 150 mm | |
Best Distance For High Speeds | 25 - 50 mm | |
Cable | 2.5 m HV Cable | |
Ambient Temperature | 0 - 60 oC | |
Ambient Humidity | Max 70 % RH | |
Weight | 0.974 Kg/m | |
Dimensions | 25 x 37 mm profile, max length 4000mm | |
Isolation | Epoxi | |
Approval | CE |