當前位置：中山市泰倫特電子科技有限公司>>儀器儀表>>荷重儀表>>DN10 DN30數字電子重量?jī)x

DN10 DN30數字電子重量?jī)x

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質經銷商

所在地中山市

在線詢價 收藏產品查看聯系電話

聯系方式：周秋香查看聯系方式

更新時間：2024-11-03 09:14:47瀏覽次數：43次

聯系我時，請告知來自智能制造網

產品分類 品牌分類

暫無信息

中山市泰倫特電子科技有限公司

經營模式：經銷商

商鋪產品：1068條

所在地區：廣東

聯系人：周秋香（銷售）

詢價 給他留言

產品簡介

DN30:DESCRIPTIONRPMprocessor/tachometer(frequencyinput)

詳細介紹

DN30 : DESCRIPTION

RPM processor/tachometer (frequency input).

The setup sequence is simple and quick using four push buttons only.

- Relay output (Hi, Low)

- Small Size (DIN size : 72 x 72 x 111mm )
- Cutting size : 66.5 × 66.5mm
- weight : 800 g

Option: DC 4~ 20mA (OP-01), RS232C (OP-02), RS485 (OP-03)

DN30 : SPECIFICATION

application of sensor	Proximity sensor , Rotary Encoder
Transducer excitation	DC 10V, 12V, 24V
measuring range	1Pulse/1Circle : 1~60000rpm
measuring range	60Pulse/1Circle : 1~20000rpm
Measuring accuracy	0.005% ±1digit
Display	0000 ~ 60000
Display Speed	Approx. 30 times/sec
Display size	7segment 10mm
Decimal point	Auto setting
Onalog output	DC 0 ~ 10V
Temperature operating	-10? ~ 60?
humidity	less than 80% RH
Power requirements	220V 50/60Hz(110V )

MP981 : SPECIFICATION

Detection method	Hall element
Measurement range	1Hz.20 kHz (using a 60P/R gear, 1.20,000r/min, with an output waveform duty cycle 50%±20%)
Detection gear	Strong magnetic materials
Gap between detector and gear	(modulus 0.5.3, tooth width 3 mm or greater)
Power supply used	DC 12V±2V(0.5Vp-p or less ripple)
Current consumption	40mA or less(12V, at 25℃)
Output type	Floating groung
Protective circuit	Power supply polarity and output short protection
OOperating temperature range	-10 C.~+70 C
TStorage temperature range	-20 C.~+80 C
Matching connector	6-pin connector(type R04-PB6F plug)
Weight	Approx. 80g(including two mounting nuts

The DN-10 has been designed specifically to operate with strain gauge sensors such as Load cell, Pressure
Transducer. LVDT. etc. - The setup sequence is simple and quick using four push buttons only.
- Calibration mode: real-weight(stａnd weight) or
rated output(mv/v) from the sensor.
- Sampling speed: Appr. 100 times per second.
- Comparison function(Hi, Lo)
- Small size
- DIN size
- 72 x 72 x 111mm

SPECIFICATIONS

Specifications	DN10
Temperature storage	-10℃ ~ 85℃
Temperature operating	0℃ ~ 60℃
Relay output	AC 250V 0.5A DC 30V 1A
Transducer excitation	10V DC
Type of inputs accepted	1~3mV/V
Transducer current drive	120mA
Calibration method	Front panel switches
Temperature drift	0.02% FS/℃
Sampling speed	Appr.100Times Per Second
Characters displayed	5 digits
Typical accuracy	+/- 0.02%
Polarity indicator	Yes
Decimal point selection	Push button setup
Display size	15 & 10mm
Resolution max.	±19999
Type	7segment 5LED, height 10mm
Input/Output connector	Push Button
Weight	800g
Mounting	Panel mounting
Size	66.5 x 66.5(mm)
Power Requirements	AC 110V/220V , 50/60㎐
Relay out	Lo , Hi
Option	DC 4~20mA (DAC) / RE232C , RS 485