PLC 工控機 嵌入式系統 人機界面 工業以太網 現場總線 變頻器 機器視覺 DCS PAC/PLMC SCADA 工業軟件 ICS信息安全 應用方案 無線通訊
中山市泰倫特電子科技有限公司
中山市泰倫特電子科技有限公司
暫無信息 |
For:-Loadcells-Pressure,torqueanddisplacementtransducersFeatures:-Frontpanelcalibrationandoperation-Simulativeorliveloadcalibration-4digithighbrightnessLEDdisplay1
For : -Load cells
-Pressure, torque and displacement transducers
Features: -Front panel calibration and operation
-Simulative or live load calibration
-4 digit high brightness LED display
1.Analog signal Input range Min.(0.5mV/V), Max.(3.2mV/V)
2.Non-linearity ±0.03% of full scale
3.Internal resolution ±1/20000
4.Temp. coefficient for V/ RTI Max.
display accuracy Span-within 0.01% reading/
5.Excitation for pressure
transducer or loadcell
6.Display
Type LED, 7 segments red, 10mm high
Active digit 4 digits, (0000~±9999)
Polarity indication "-" sign
Display increments 1,2,5,10,20,50
Decimal points Selectable to any point(10, 100, 1000)
Status annunciators Red LEDs indicate zero tracking, peak
hold high and low trip relay operation
7.Sampling speed Appr. 15 times per second
8.Set point High, low set point (0000~±9999)
Temp.: -10 ~40
Hum.: 20 ~ 80% RH
Relay output;
Relay contact output
AC 240V, 2A or DC 30V, 2A
AC ll0V, 50/60 Hz or AC 220V, 50/60 Hz
or AC 240V, 50/60 Hz - Available on request
12.Power Consumption Appr. 8VA
13.Calibration Simulative calibration or Liveload calibration
by front panel push button
Response-Appr. 1 KHz
Accuracy-0.1% FS Max.
Mode-Peak hold/Instant hold selectable
by front panel push button
15.Option
OP-1-BCD parallel output Isolated open collector
(Maximum input voltage;DC 30V,20mA)
OP-2-Analog output Voltage output (0~10V)
OP-3-Analog output Current output (4~20mA)
OP-4-RS-232C output RS-232C output
OP-5-Peak hold High speed peak hold (App. 10KHz)
16.Accessories Power cord, fuse
17.Weight Appr. 2.2kg
DC 10V, 120mA
9.Ambient condition
10.Set point relay output
11.Operating Voltage
14.Hold mode
Zero-0.25
oC
oC
oC
The BS-300A multifunction transducer Indicator/Controller is a highly versatile instrument suitable for use with any
strain gauge type transducer.
A feature of the instrument is its ability to be calibrated by simple front panel push button entry of any transducer's
sensitivity from the manufacturer's calibration certificate, followed by entry of the engineering units in which it is to be
used. Alternatively, conventional zero, span and analog output calibration is also available from the panel.
Other features of the BS-300A include push button tare, zero tracking, averaging, high/low relay outputs, peak hold
ａnd excitation for up to four 350 ohm transducers in parallel. Electrical connection is via the rear panel terminals,
including the facility for remote operation of the tare and peak hold functions. Options include 4-20mA, 0-10V DC,
RS-232C and BCD outputs. Housed in a rugged steel case, the BS-300A features a front panel measuring 88mm
x150mm, with an overall depth of 194mm. Suitable for panel or free standing use, the unit will operate on
110V,220V, or 240VAC.
Typical applications include weighing, batching, mixing, force, pressure, torque and displacement.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智能制造網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
