當前位置：GERMANY LIK VALVE NTERNATINOAL LTD>>進口疏水閥>>進口杠桿浮球式疏水閥

進口杠桿浮球式疏水閥

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質經銷商

所在地廣州市

在線詢價收藏產品查看聯系電話

聯系方式：黃永清查看聯系方式

更新時間：2022-09-07 10:57:41瀏覽次數：112次

聯系我時，請告知來自智能制造網

產品分類 品牌分類

暫無信息

GERMANY LIK VALVE NTERNATINOAL LTD

經營模式：經銷商

商鋪產品：195條

所在地區：廣東廣州市

聯系人：黃永清（銷售部經理）

詢價 給他留言

產品簡介

萊克生產的進口杠桿浮球式疏水閥，驅動方式可選用自動，連接方式可選用內螺紋、法蘭，結構形式可選用硬密封，密封結構可選用，壓力范圍PN1.6-100MPA，公稱通徑為DN15MM-500MMmm，材質可選用鑄鋼、不銹鋼。由于閥門的使用范圍非常的廣泛，同一種閥門在不同的場合與工況有不同的搭配，如果您是非專業人士，歡迎您向本公司。本公司有專業技術人員為您服務！技術部：

詳細介紹

德國萊克閥門有限公司首頁 >> 產品展示 >>進口疏水閥>>進口浮球式疏水閥>>進口杠桿浮球式疏水閥

產品名稱：	進口杠桿浮球式疏水閥	產品型號：	LIK
驅動方式：	自動	連接形式：	內螺紋、法蘭
結構形式：	硬密封	密封結構：
壓力范圍：	1.6-100MPA	公稱通徑：	DN15MM-500MM
常用材質：	鑄鋼、不銹鋼	技術咨詢：

產品簡介

產品詳情

德國萊克（LIK）品牌：進口杠桿浮球式是利用浮力原理和杠桿原理，通過液位的變化使浮球上升或下降，浮球驅動著杠桿使得閥瓣離開或接觸閥座達到開啟排水和關閉阻汽的作用。采用自動排空氣閥，能自動排除不凝結氣體，非常靈敏，工作質量高，使用壽命長。連續排水，有水即排，zui小過冷度為 0℃。杠桿浮球式疏水閥采用兩種結構方式 A：單閥座-杠桿浮球; B：雙平衡閥座-杠桿浮球。

　　單閥座：需要克服介質壓力對閥座的作用，閥座的孔徑不能很大，適用于小型設備、伴熱管線，蒸汽主管等排水小的場合。閥座孔設計在凝結水水位以下，自然形成水封，水、汽自然分離，達到無蒸汽泄漏，即便沒有凝結水采用球型密封的杠桿使得閥瓣緊貼閥座，達到無新鮮蒸汽的泄漏。不受凝結水量波動和溫度的影響。

　　雙平衡閥座：該閥利用雙閥孔設計，介質的壓力對兩個閥座作用相等，方向相反，介質壓力對閥座作用相抵消，閥芯在開閥時壓力相對減少，從而獲得超大排量。工作時浮球隨閥腔內液體位的變化而上下浮動，帶動杠桿打開或關閉閥座。由于閥座孔在凝結水水位以下，形成水封，水、汽自然分離，達到無蒸汽泄漏。不受壓力、溫度、冷凝水流量波動的影響。

Lever-ball float trap

The lever-ball float type trap employs the buoyancy and leverage principles: to make the ball float ascend or descend by the change in the liquid level and then the ball float drives the lever to make the valve disc depart from or touch the valve seat to realize drainage and close the block vapor. The product adopts the automatic air exhaust to automatically eliminate non-condensing air. It is very precise with high operating quality and long service life. It can discharge whenever there is any water, and its minimum subcooled temperature is 0℃. The lever- ball float trap adopts two kinds of structure modes: A: Single valve seat-lever ball float; B: double balanced valve seat-lever ball float.

Single valve seat: it needs to overcome the operation on the valve seat by the medium pressure; the hole caliber of the valve seat cannot be too large and is applicable to such low displacement condition as mini-equipment, steam tracing pipeline and steam main pipe. The hole of the valve seat is designed beneath the water level of the condensate water to form water sealing to keep water apart from vapor, so as to prevent the leakage of the vapor. Though there is no condensate water that uses ball-type sealed lever to make the valve clack tightly adhesion to the valve seat, it can prevent the fresh vapor from leakage. Further, the product is free of the affect of the fluctuation of the condensate water’s quantity and temperature.

The double balanced valve seat: this valve is designed to have two valve openings. The pressure of the medium act against the two valve seats equally in reverse direction, so the pressure on the valve seat is offset, the valve core assumes relatively low pressure when the valve is open, in this way the overlarge displacement is obtained. During the operating process, the ball float floats with the change in liquid level of the valve cavity to make the lever open or close the valve seat. The hole of the valve seat is designed beneath the water level of the condensate water to form water sealing to keep water apart from vapor, so as to prevent the leakage of the vapor. Further, the product is free of the affect caused by the fluctuation of pressure, temperature and condensate’s flow.

優點：

1、采用新型閥機構（新 SCCV 關閉方式和Z型結構），具有優良的密封性和耐久性。

2、雙平衡閥座設計，比一般的疏水閥體積小而排量大，在特大排量場合更能發揮*性。

3、單閥座設計可以水平或垂直安裝，可以滿足高背壓，低排量蒸汽管線。

4、內裝空氣自動排放閥，可防止空氣氣堵和蒸汽汽鎖。

5、全部部件安裝在閥蓋上，閥無需從配管上卸下，就可維修保養，簡單方便。

Merits

1. To use new-style valve mechanism (new SCCV closing mode and Z-shaped structure) to boast excellent tightness and endurance.

2. To employ double balanced valve seat design, it has smaller volume and larger displacement and can exert its advantages when needing large displacement.

3. The single valve seat model can be installed horizontally and vertically, satisfying the requirements of steam pipeline with high backpressure and low displacement.

4. The built-in automatic air exhaust can prevent air blocking and steam locking;

5. As all components are installed on the valve cover, so they can be maintained and cleaned up simply and easily without being removed from pipe arrangement.

技術參數/Technique parameter

殼體壓力等級

Shell pressure grade

負荷泄漏率

Load leakage rate

使用介質

Used medium

允許背壓率

Permitted backpressure rate

節能效果

Energy saving effect

zui大工作壓差

Maximum operating pressure differential

1.6、2.5、4.0、10MPA

≈0%

蒸汽、凝結水

Steam、Condensate water

≥90%

優秀/良好

Excellence/good

10MPA

zui小過冷度

Minimum subcooled temperature

排水方式

Drainage method

zui高允許溫度

Maximum allowable temperature

排空氣裝置

Air exhaust system

壓力變化范圍

Pressure change range

0℃

連續方式

Continue mode

420℃

自動

Automatic

適應

Adaption

主要零件材料/The materials of primary accessories

零部件名稱Part and component name	材質Material
閥體、閥蓋Valve body、Valve cover	鑄鋼、不銹鋼Cast steel、Stainless steel
浮球、杠桿Float ball、Lever	304不銹鋼304 Stainless steel
雙平衡閥座Dual balance valve seat	STL合金和不銹鋼組合Combination of STL alloy and stainless steel
自動排空氣裝置Automatic air exhaust	不銹鋼、熱敏元件Stainless steel、Thermo-sensitive element
過濾網Filtrating screen	不銹鋼Stainless steel