PLC 工控機 嵌入式系統 人機界面 工業以太網 現場總線 變頻器 機器視覺 DCS PAC/PLMC SCADA 工業軟件 ICS信息安全 應用方案 無線通訊
東莞市凌圣五金機電有限公司
東莞市凌圣五金機電有限公司
采用500萬超高分子聚乙烯制作加工而成，高耐磨，耐高溫，自潤滑，適用各種鏈條的導向作用；高耐磨、耐溫、精密、穩固、無聲、環保等高精度的鏈條導向；采用500萬超高分子量耐磨,耐溫工程塑料"S","S1000"材料,具有經濟,無污染特性；磨損小.摩擦阻力??；自行潤滑.(不需任何潤滑油) ；具有抗沖擊性.使用溫度范圍-200~+80℃；具有減震作用，在潮濕環境下不易受潮；具有高的抗化學性能.有抗腐蝕性。
ESD成立，以什么工程辦公室于1984年由維爾納?舒爾茨博士和克勞斯德特林。自那時以來，公司已成長為在國際上活動的系統的房子在工業自動化技術領域。自1992年以來的ESD位于Vahrenwalder街漢諾威以北。擁有超過60名員工ESD為客戶提供從開發一個真正全面的服務，通過批量生產來提供支持。公司自成立以來ESD是100％的管理層擁有。
定制設計用于工業自動化
ESD開發和生產的硬件和軟件，用于工業自動化工程，重點定制的解決方案，主要集中在汽車，工程，醫療技術和航空航天工業領域。小編生產提供ESD就像按時交付的大型系列。培訓和研討會補充發展服務。
ESD從事多年的使用基于PowerPC的類型系統的開發經驗PPC4xx，MPC8xxx/52XX/750至多核的QorIQ回來。還設計有ARM處理器和待開發8位/ 16位微控制器?？梢?，PROFIBUS，PROFINET?，EtherCAT和無線功能的整合是特色之一。*的要求，例如惡劣的環境或爆炸保護考慮到在ESD的發展。
CAN-CBX-THERMO
CANopen Module with 4 Thermocouple Interfaces
High Resolution Temperature Measurement
4 high resolution and accuracy thermocouple inputs
Support of J, K, B, E, N, R, S and T thermocouples
Automatic cold junction compensation
CANopen profiles acc. to CiA specification CiA 301 and CiA 404
Approved Reliability and Ease of Use
Electrical isolation of thermocouple interfaces: all channels are electrically isolated against the microcontroller circuits and against each other
InRailBus technology combines high ease of use and proven reliability
DIN-EN carrier rail mounting (TS 35)
Setup Options of Thermocouple Interfaces
Offset/Gain can be adjusted by the user
Voltage-only measurement also available
CAN-EtherCAT
EtherCAT-CAN Gateway
Seamless Connection between EtherCAT and CAN
High-speed CAN interface (ISO 11898-2)
100BASE-TX EtherCAT interface (IEEE 802.3)
User-Friendly Configuration
Configuration via EtherCAT master and standard EtherCAT configuration tools
EtherCAT slave functionality according to ETG Modular Device Profile No. 5000
EtherCAT Network Extension
Ethernet-over-EtherCAT (EoE) support to connect Ethernet devices to EtherCAT
Firmware upgradable
CAN-PCIe/402
PCI Express Board with up to 4 CAN Interfaces
Single Lane PCIe Board with Altera FPGA for up to 4x CAN
1x, 2x or 4x CAN interfaces according to ISO 11898-2
Bus mastering and local data management by FPGA
PCIe interface according to PCI Express Specification R1.0a
Supports MSI (Message Signaled Interrupts)
Selectable CAN termination on board
Wide Range of Operating System Support and advanced CAN Diagnostic
Drivers and higher layer protocols for Windows, Linux, VxWorks, QNX, RTX, RTX64 and others
CANopen, J1939 and ARINC 825 protocols available
esd Advanced CAN Core (esdACC) technology
Variety of Product Designs
Product versions available with or without electrical isolation
Low profile version for 1x CAN or 2x CAN
4x CAN via 1x DSUB37 connector (adapter cable available as an option)
ECX-EC
EtherCAT Slave Bridge
"Bridging" two EtherCAT Slave Segments
Includes two EtherCAT slave devices
Process data exchange between two EtherCAT networks
Time synchronization (DC) between the EtherCAT Masters
Supports DC with redundancy
EtherCAT Implementation
Ethernet physics acc. to IEEE 802.3
Configuration via CoE
Firmware upgradeable via FoE
EoE support (Switch port)
EtherCAT Process Image widely configurable
Configuration by typical network configuration tools (e.g. esd Workbench, TwinCAT?)
Up to 1024 bytes in each direction
Layout defined by variables, e.g. 'UDINT'
CAN-USB/2
CAN USB 2.0 Interface
CAN Network at USB 2.0 High-Speed
USB 2.0 high-speed interface with data rates of 480 Mbit/s
Differential CAN interface with electrical isolation, 1 Mbit/s, ISO 11898-2
Powered via USB
Microcontroller ARM 7
Time stamped CAN messages with a resolution of 1 μs
Robust Alu-Micro Case with Status LEDs
Aluminium case, dimensions 55 mm x 55 mm x 25 mm
Four LEDs show the state of the module
Incl. USB cable
Wide Range of Application
Silent mode support for analyzing tools
Full compatibility with applications written for esd's NTCAN-API
CANopen and J1939 protocol libraries are available
Firmware can be updated in the field
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智能制造網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
