音頻分析儀 upa3

德國羅德與施瓦茨 rohde & schwarz

• 頻率范圍: 10 hz - 100 khz
• 按照din ccir和ccitt標準進行噪聲測量 
• 內置測量真有效值或準峰值的寬帶電平表 
• 可同時測量電平和頻率 
• 直流電壓測量 
• 數字與模擬組合顯示方式 
• 低失真和浮動輸出的合成信號發生器( 選件) 
• 用開關選擇的發生器輸出阻抗 
• 用于測量總諧波失真選頻諧波失 
• 真的全自動失真度表或者信納比表(選件) 
• 符合din ccir iec nab jis 
• 標準的變音(wow) 和顫音 
• (flutter) 測量表以及幅值波動表(選件) 
• 頻率計和相位表
• 可存儲50套儀器設置的非易失存儲器

• 可在平衡和非平衡模擬音頻接口上測量所有基本音頻參數。
• 選件眾多，用戶可針對應用對儀器進行*配置。
• 各種濾波器選件可滿足不同音頻測量的需要。
• upa3型是由upa和一個信號發生器一個失真度表共同組成的高性價比測試裝置。
• upa 具備遠程控制功能(iec625/ieee488)，測量速度很快，可用于在生產流水線上對音頻元器件進行自動測試。

基礎單元

• 音頻電壓表
  voltage measurment range 10μv to 300v,unbalanced
  10μv to35v balanced 
  frequency range 10hzto 100khz 
  22.4hz300hz highpass filters
  ccir,ccitt 
  other filters contained in option upa-b2 
  test inputs floating 
  balanced two 3-contact female connectors switch able r/l channel,600ω/20kω 
  unbalance rejection >110dbat 50hz 
  unbalanced two bnc female connectors switch able r/l channel,1mω 
  crosstalk attenution r/l >80db at 20khz 
  detector rms-responding rectifier quasi-peak responding rectifier 
  level indication 5digits in mv,v dbm mw or w relative indication in % or db 
  accuracy rms(sine wave) ±1%±1digit(30hz to 20khz) 
  inherent noise 
  ccir,weighted(qpk) <10μv(unbalanced,600ω)
  <20μv(balanced,600 ω) 
• 失真測量 (with generator option upa-b6) 
  signal frequencyrange 30hz to 100khz 
  display range 0 to 120db 
  accuracy(s/n ≤60db) ±1db 
  inherent s/n ration ±85db or <20μv 
  dc voltage measurment 0 to ±300v 
  test inputs see af level meter but unbalanced only 
  accuracy ±1%±1digit 
  frequency counter 
  frequency measuremnt range 8hz to 250khz 
  required input vltage >10mv (s/n ratio>20db) 
  accuracy ±0.005%±1digit 
  phase measurement 
  display range 0 to 180° 
  resolution 0.1° 

選件

• 發生器 option upa-b6 (upa3 標配) 
  frequency range 10hz to 100(110) khz 
  accuracy ±0.01% 
  outputs like test inputs of af level meter 
  unbalance rejection >80db at 1khz (bal,vout >1) 
  crosstalk attenuation l/r >80 db at 20khz 
  output impedance 30ω/200ω/600ω se-lect able 
  output voltage no load 0.1mv to 12.4v 
  load impedancemax.load >200ω/54ma 
  output circuit short-circuit-proof switched off incase of external feeding 
  inherent distortion(vout>300mv) <-80 db(30hz to 20khz) 
  frequency response(fer.to 1khz) ±0.5% (10hz to 20khz) 
• 失真表 option upa-b8 (upa3 標配)
  frequency range fundamental 10hz to 100khz 
  frequency adjustment automatic or by frequency prese-lection 
  display modes toal harmonic distortion thd,se-lective distortion d2 to d9 sinad,level 
  display range -120 to 0db(distortion) 
  accuracy thd or sinad,20hz to 20khz ±1db(harmonics up to 100khz) 
• wowflutter meter(option upa-b9) 
  measurement method iec,nab,jis,2-sigma 
  measurement range 0.003 to 5% 
  accuracy ±10% 
  amplitued variation meter 
  frequency range 2 to 20khz 
  variation 
  level 0to 20db 
  frequency 0.1 to 300hz 
  accuracy ±0.25db (0 to 3db) 
• special filter(option upa-b2) 
  a-filter to din iec 651 
  bandstop filters pilot-tone trap with 15khz lowpass filter line-frequency trap with 13khz lp(both filters can be combined with a=filter) 
  band pass jilters standard frequencies 315hz/1/3.15/6.3/10/12.5khz additionally adjustable fixed center frequencies of 8/9/10/11/12/13/14/15/15.5/1/17/18/19/20/25khz adjustable passband frequenciesfrom 23hz to 25khz e phon band pass filter 320hz to 3.4khz band pass filter 2to 10khz 
  lowpass filter 350hz/1.04/3.5/7/10.4/15khz 
• remotecontrol iec 625-1(ieee 488 )control of all instrument functions 

二手儀器: / buy17