橫河AAP135-S00脈沖輸入模塊
AAT145-SE3/13S10 AAI135-SE3/13S10 AAI835-SE3/13S10 AAR145-SE3/13S10 AAI543-HF3/A4S10
AAT145-SF3/13S10 AAI135-SF3/13S10 AAI835-SF3/13S10 AAR145-SF3/13S10 AAI543-S00/A4D00
AAT145-H03/13S10 AAI135-H03/13S10 AAI835-H03/13S10 AAR145-H03/13S10 AAI543-S50/A4D00
AAT145-H53/13S10 AAI135-H53/13S10 AAI835-H53/13S10 AAR145-H53/13S10 AAI543-S60/A4D00
AAT145-H63/13S10 AAI135-H63/13S10 AAI835-H63/13S10 AAR145-H63/13S10 AAI543-SE0/A4D00
Pulse Input Module （Isolated Channels）
This module receives contact ON/OFF, voltage pulse and current pulse. This is isolated between the ?eld and the system as well as between each channel.
It can be used in dual redundant con?guration.
AAP135-S00脈沖輸入模塊
| Items | Speci?cations |
| Model | AAP135 |
| Number of input channels | 8, isolated channels |
|
Input signal （*3） | 2-wire type: Contact ON/OFF, voltage pulse, current pulse （possible to supply transmitter power supply） 3-wire type: Power-supply-type voltage pulse |
| Input frequency | 0 to 10 kHz （*4） |
|
Withstanding voltage | Between input and system: 500 V AC, For 1 minute Between channels: 500 V AC, For 1 minute （*1） |
| Minimum input pulse width | 40 µs |
|
Input signal level | Contact input Open/close levels of relay contact and transistor contact Open: 100 kΩ or more, Close: 200 Ω or less Contact capacity When supplying 12 V DC: 15 V DC 15 mA or more When supplying 24 V DC: 30 V DC 30 mA or more Voltage/current pulse input （Current input is converted to voltage.） VH （high level）: 3 to 24 V DC VL （low level）: -1 to 8 V DC VH-VL （swing value）: 3 V or more Signal source resistance: 1 kΩ or less |
|
Shunt resistance | Can be selected from none/200/500/1000 Ω. （Open when power is OFF and for the standby side in a dual-redundant con?guration） |
| Pull-up resistance | 68 kΩ （12 V DC or 24 V DC） |
| Filter | Filter for eliminating chattering can be set. （*2） |
| Data update period | 2 ms |
|
Transmitter power supply | Can select 24 V DC/12 V DC. Limiter value 12 V DC ±10 %: 40 mA, 24 V DC ±10 %: 30 mA |
| Maximum current consumption | 300 mA （5 V DC）, 400 mA （24 V DC） |
| Weight | 0.3 kg |
| External connection | Pressure clamp terminal, KS cable, MIL connector cable |
AAP135-S00脈沖輸入模塊
*1: The withstanding voltage for using MIL connector cable depends on the electrical speci?cations of its cable.
*2: When the pulse input signal is dry contact （such as from a mechanical relay） up to 10 Hz, it is possible to eliminate the chattering.
*3: The connection method of the ?eld devices varies depending on the input signal.
For details, please refer to Installation Guidance （TI 33M01J10-40E）.
智能制造網