GBV蝶閥驅動器BUTTERFLYVALVEACTUATORPCMButterflyMotorValvesareintendedforon-offcontrolapplicationofchemicalprocesses,refinery,oilfield,powerplant,etc
 GBV蝶閥驅動器BUTTERFLY VALVE ACTUATOR | | PCM Butterfly Motor Valves are intended for on-off control application of chemical processes, refinery, oil field, power plant, etc.
Rotary Actuator is standard.
Combined Rotary Actuators are on-off type and control type optional accessories are manual handle, position-transmitter, limit switch, etc. | | GINICE Buatterfly valves are for on-off control application of chemical processes, refinery, oil field, power plant.
Rotary actuator is standard. Combined rotary actuators are on-off type and control type optional accessories are manual handle, position-transmitter, limit switch, etc. | | | Standard model | : GBV Series | | | Actuator | : Motor | | | Valve Size | : 1 1/2" ~ 16(40A ~ 400A) | | | Pressure Rating | : JIS 10K, 20K | | | Connection | : Wafer, Flanged, Etc. | | | Operating Temperature | : Max.80℃, 220℃ | | | Material | : Body : AL, GC20, SCS13, 14
Disc : SUS304, SUS316
Seat : NBR, EPDM, VITON | | | ▣ Limit switch
The locaton valve is precisely controlled by CAM attached on drive axis, its simple structure makes setting easy. The set position is permanent and is not affected by over-travel resulting from manual operation.
▣ Electric wiring
Electric wiring of single phase, three phase and proportional control, etc is standar dized and well arranged.
▣ Potentiometer
The location of valve propotionally Controlled thru vairous signal from controller of PLC or PROCESS COMPUTER, So the transfer of feedback signal is possible.
▣ Motor
Reversible Motor installed in GBV Series Actuator not only gives high torque by output but its saftey is reinforced with thermostsat built inside.
▣ Indicator
The location of valve can be accurately found in long distance by the indicator directly connected wuth the drive zxis and the condition of Open/Close.
▣ Heater
20W Heater is installed in actuator to protect any electric leakage from the moisture of motor and its various switches, which can be generated from Condensed water by the variaton of humidity and temperature.
▣ Sealing
Each part and connecting moving part are completely sealed by oring. Which prolongs the safety and durability of actuator.(IP65)
▣ Self locking
Rolled steel wormgear on aluminum bronze worm wheel self-locks to prevert valve back drive on control signal or power failure.
▣ Performance Mechanism
Powerful output torque of high efficiency and low noise is produced from motor output that gives out thru two shift worm gear.
▣ Manual Hａnd Wheel
When the power is failed. The drect drive handwheel shall be used for manual operation after switching by the sprong engaged pull handle.
BASIC SYSTEM ACTUATORS
▣ Stem adaptor
Main drive shaft and adaptor are simplySeparated, so that process can be possible in accordancd with valve stem, from which various mounting of valve is easy & simply.
▣ Feature
These models are engineered operation, either open-close or modulating, of butterfly valves, ball valves, plug valves and damper for 90℃ turn applications. (Type Actuators) | MODEL | BUTTERYFLY
(2-Way) | BUTTERYFLY
(3-Way) | BALL
(2-Way) | BALL
(3-Way) | | GBV-08 | 80A | - | 15A ~ 25A | 15A ~ 32A | | GBV-10 | 100A | 40A | 32A ~ 50A | 40A | | GBV-15 | 125A ~ 150A | 50A | 65A | 50A | | GBV-20 | 200A | 65A | 80A | 65A | | GBV-30 | 250A | 80A | 100A | 80A | | GBV-45 | 300A | 100A | 125A | 100A | | GBV-60 | 350A | 125A | 150A | 125A | | GBV-100 | 400A | 150A | 200A | 150A | | GBV-150 | 450A | 200A | 250A | 200A | | GBV-200 | 500A | 250A | 300A | 250A | | ELECTRIC ACTUATORS | | Actuator Performance | Model | Torque | OP.Time sec/90。 | Motor output(W) | Current 220v.1ph(Amp) | Weight | | GBV-08 | 8 | 25±2 | 25 | 0.3 | 8.5 | | GBV-10 | 10 | 27±2 | 25 | 0.3 | 8.5 | | GBV-15 | 15 | 27±2 | 25 | 0.3 | 8.5 | | GBV-20 | 20 | 27±2 | 40 | 0.45 | 12 | | GBV-30 | 30 | 27±2 | 40 | 0.45 | 12 | | GBV-45 | 45 | 27±2 | 90 | 1 | 13 | | GBV-60 | 60 | 27±2 | 90 | 1 | 13 | | GBV-100 | 100 | 80±5 | 200 | 1.6 | 47 | | GBV-150 | 150 | 80±5 | 200 | 1.6 | 48 | | GBV-200 | 200 | 80±5 | 200 | 1.6 | 54 | | | Standard Specification | | Enclosure | Watertight IP65 | | Ambient Temp | -20 ℃ to +70℃ /1Hr | | Power Supply(60Hz/50Hz) | 110/220VAC, 1Phase 220/380/440VAC, 3Phase, DC24V | | Control power | 110/220VAC, 1Phase 60/50Hz | | Limit Switches | 2 Open/Close, 250VAC 16A Rating | | Stall Protection | Built-in Thermal Protection Open 150℃/Colse 97 ℃±15 ℃ | | Travel Angle | 90。±15。 | | Indicator | Coutinuous Position Indicator | | Manual Override | Hand/Auto Decluthing Mechanism | | Self Locking | Provided by means of Worm Gearing | | Mechanical Stops | External Adjustable Screws | | Space Heater | 20W(110/220VAC)Ani-Condensation | | Conduit Entries | PF 1/2" | | Lubrication | Grease NLGI Grade 2(EP Type) | | Meterials | Steel, Aluminium Alloy, Al bronze | | External Coating | Dry Powder, Epoxy-polyester | | | Option | | Potentiometer(1K ohm). Modulating controls(4~20mA)
Local controls, Auxiliary swutvhes, Mounting bracket, Vlaves | | Dimesion | | Type | GBV08 | GBV10 | GBV15 | GBV20 | GBV30 | | | A | 84 | 115 | 115 | 130 | 130 | | B | 40 | 36 | 36 | 55 | 55 | | C | 73 | 105 | 105 | 117 | 117 | | D | 240 | 255 | 255 | 260 | 260 | | F | 145 | 160 | 160 | 160 | 160 | | G | 75 | 125 | 125 | 125 | 125 | | H | 230 | 220 | 220 | 255 | 255 | | I | 124 | 120 | 120 | 130 | 130 | | J | 106 | 100 | 100 | 128 | 128 | | K | 140 | 205 | 205 | 230 | 230 | | L |
| 45 | 45 | 80 | 80 | | M |
| 17 | 17 | 14 | 14 | | Type | GBV45 | GBV60 | GBV100 | GBV150 | GBV200 | | | A | 175 | 175 | 175 | 175 | 175 | | B | 70 | 70 | 70 | 70 | 70 | | C | 155 | 155 | 155 | 155 | 155 | | D | 320 | 320 | 320 | 320 | 320 | | F | 185 | 185 | 185 | 185 | 185 | | G | 150 | 150 | 150 | 150 | 150 | | H | 310 | 310 | 495 | 495 | 495 | | I | 150 | 150 | 335 | 335 | 335 | | J | 160 | 160 | 160 | 160 | 160 | | K | 275 | 275 | 275 | 275 | 275 | | L | 80 | 80 | 150 | 150 | 150 | | M | 14 | 14 | 280 | 280 | 280 | | N |
|
| 225 | 225 | 225 | | | | | |
