當前位置：中山市泰倫特電子科技有限公司>>氣動/泵閥類>>控制閥>>GDA-20比例控制閥 ginice吉事

GDA-20比例控制閥 ginice吉事

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質經銷商

所在地中山市

在線詢價 收藏產品查看聯系電話

聯系方式：黃玲查看聯系方式

更新時間：2024-10-17 08:59:34瀏覽次數：71次

聯系我時，請告知來自智能制造網

產品分類 品牌分類

暫無信息

中山市泰倫特電子科技有限公司

經營模式：經銷商

商鋪產品：2203條

所在地區：廣東

聯系人：黃玲（業務）

詢價 給他留言

產品簡介

ON-OFFDAMPERACTUATOR(GDA-20A)GDA-20AismotoroperatedON/OFFdamperactuatortoopenandcloseDamperwhichcanbeusedforHVACairhandlingunits

詳細介紹

ON-OFF DAMPER ACTUATOR(GDA-20A)

GDA-20A is motor operated ON / OFF damper actuator to open and close Damper which can be used for HVAC air handling units.

Used for operating Damper for ventilation and Air handling facilities.
Nominal torque is 20Nm and can be covered damper surface area for 4㎡.
Used for ON / OFF damper control.
Used for air damper, ventilating gas damper, etc.

Select operating direction ( CW or CCW ) by changing the connection of wiring
Actuator will move within 0°"or“90° in case of normal input supply power
When the power is OFF at AC24V or AC220V, Actuator will stop moving at the current position

Supply Voltage : AC 24V ±10%, or (AC220V)
Frequency : 50 / 60 ㎐
Power Consumption : 5.5VA ( On Operation )
Control Signal : ON / OFF Switch
Torque : 200 Kg-㎝(20 Nm)
Rotation Range : 0 ~ 90°
Mechanical Rotation Range : 95°±2° ( mechanical limit at 95°)
Direction of Rotation : Forward/Reverse direction ( changing wire connection)
Operating Tie : Apprx. 110 sec.
Ambient temperature : -30 ~ +50℃, below 95%RH
Connecting Cable : 0.5sq.mm ~ 1.5mm
Noise Degree : 45 dB
Protection Housing Class : IP 42
Weight : 1.67 Kg
Applicable Damper Shaft : Φ10~Φ20 ( round ), □10~□16 ( square )

Mounting Bracket : To mount actuator on damper axis directly, it must be used bracket, and fixing pin of mounting bracket should be correctly fixed into the groove of Actuator.
Mounting Location : Select easy location for setting dial of front side of Actuator and cable connection.
Manual Control : According to mounting procedures, and press manual control button first and adjust shaft adaptor and location indicator. ( in case of manual control, power should not be connected )