PLC 工控機 嵌入式系統 人機界面 工業以太網 現場總線 變頻器 機器視覺 DCS PAC/PLMC SCADA 工業軟件 ICS信息安全 應用方案 無線通訊
中山市泰倫特電子科技有限公司
中山市泰倫特電子科技有限公司
暫無信息 |
ThisisaconverterusedforconvertingtoDCsignalbyusinginputsourceofaDCsignal,RTDsensorPotentiometer
This is a converter used for converting to DC signal
by using input source of a DC signal, RTD sensor
Potentiometer.
With built-in noise removal filter, transfers correct
signal, and precision isolation circuits enable
perfect signal transfer not affected by withstand
insulation voltage, transfer speed, noise, etc.
INPUT SIGNAL SPECIFICATION
OUTPUT SIGNAL SPECIFICATION
Output voltage signal : 12VDC max.
Output voltage impedance : 2Kohm min.
Output voltage noise : 10mV p-p max.
Output current signal : 30mADC max.
Output load resistance : 750ohm max.
Output current noise(250ohm load) : 10mV p-p.
GENERAL SPECIFICATION'S
Operating ambient temperature : 0 - 50'C.
Non operating ambient temperature : -20 ~ 80'C.
Temperature coefficient : 0.02%/'C
Operating ambient humidity : 90% RH max.(non condensing)
Insulation resistance : greater than 100Mohm with 500VDC.
Dielectric strength : 1500VAC @ 1minute (input to out1 to out2 to power).
Adjustment range : 20% (zero & span) min.
Conversion accuracy : 0.2% max.
Response time : 0 - 90%(0.5sec).
OUTPUT SIGNAL1
1 : 4 - 20mADC
2 : 0 - 20mADC
3 : 1 - 5VDC
4 : 0 - 10VDC
5 : Specify signal
Slim ty pe SIGNAL ISOLATION CONVERTER (2output)
1 : 0 - 1mADC (ISO)
2 : 4 - 20mADC (ISO)
3 : 1 - 5VDC (ISO)
4 : 0 - 10VDC (ISO)
5 : 4 - 20mADC/24V(PDC)
6 : 0-50'C (RTD)
7 : 0-100'C (RTD)
8 : 0-150'C (RTD)
9 : 0-135 ohm (PMC)
10 : 0-1 Kohm (PMC)
11 : 0-10 Kohm (PMC)
12 : Specify signal
SC-ISO2
Input voltage signal : -300 ~ 300VDC
Input voltage impedance : 1Mohm min.
Input current signal : 30mADC max.
Input current load resistance : 100ohm max.(at 20mA)
1 : ISO2 (Isolator)
2 : PDC2 (Distributor)
3 : RTD2 (Temperature)
4 : PMC2 (Potentiometer)
POWER SUPPLY
1 : 24VDC/0.2ADC
1 : 4 - 20mADC
2 : 0 - 20mADC
3 : 1 - 5VDC
4 : 0 - 10VDC
5 : Specify signal
SC-PDC2
Input current signal : 30mADC max.
Input current load resistance : 100ohm max.(at 20mA)
External power source : DC22~26V/30mA Max.
SC-RTD2
Input type : 2wire or 3wire
Input signal : pt50,100,1000 ohm or Ni,cu.
Input range : -200 ~ 600 'C
EXT current : 1.5mA/5VDC>
SC-PMC2
Input type : 2wire or 3wire
Input signal : potentiometer
Input range : 100 ohm ~ 2 Mohm.
EXT power : 5VDC
FEATURES
Small size(mm) : 75(H), 22.5(W), 100(D)-at on DIN rail.
Wiring : Terminal wiring.
Case & color : gray Polyamide UL 94.V2.
Weight : about 100g.
POWER SUPPLY SPECIFICATION
Power source : DC voltage.
Power range : DC24V/200mA max.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智能制造網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
