PLC 工控機 嵌入式系統 人機界面 工業以太網 現場總線 變頻器 機器視覺 DCS PAC/PLMC SCADA 工業軟件 ICS信息安全 應用方案 無線通訊
中山市泰倫特電子科技有限公司
中山市泰倫特電子科技有限公司
暫無信息 |
DN30:DESCRIPTIONRPMprocessor/tachometer(frequencyinput)
DN30 : DESCRIPTION
RPM processor/tachometer (frequency input).
The setup sequence is simple and quick using four push buttons only.
- Relay output (Hi, Low)- Small Size (DIN size : 72 x 72 x 111mm )
- Cutting size : 66.5 × 66.5mm
- weight : 800 g
Option: DC 4~ 20mA (OP-01), RS232C (OP-02), RS485 (OP-03)
DN30 : SPECIFICATION
| application of sensor | Proximity sensor , Rotary Encoder |
| Transducer excitation | DC 10V, 12V, 24V |
| measuring range | 1Pulse/1Circle : 1~60000rpm |
| 60Pulse/1Circle : 1~20000rpm | |
| Measuring accuracy | 0.005% ±1digit |
| Display | 0000 ~ 60000 |
| Display Speed | Approx. 30 times/sec |
| Display size | 7segment 10mm |
| Decimal point | Auto setting |
| Onalog output | DC 0 ~ 10V |
| Temperature operating | -10? ~ 60? |
| humidity | less than 80% RH |
| Power requirements | 220V 50/60Hz(110V ) |
MP981 : SPECIFICATION
| Detection method | Hall element |
| Measurement range | 1Hz.20 kHz (using a 60P/R gear, 1.20,000r/min, with an output waveform duty cycle 50%±20%) |
| Detection gear | Strong magnetic materials |
| Gap between detector and gear | (modulus 0.5.3, tooth width 3 mm or greater) |
| Power supply used | DC 12V±2V(0.5Vp-p or less ripple) |
| Current consumption | 40mA or less(12V, at 25℃) |
| Output type | Floating groung |
| Protective circuit | Power supply polarity and output short protection |
| OOperating temperature range | -10 C.~+70 C |
| TStorage temperature range | -20 C.~+80 C |
| Matching connector | 6-pin connector(type R04-PB6F plug) |
| Weight | Approx. 80g(including two mounting nuts |
The DN-10 has been designed specifically to operate with strain gauge sensors such as Load cell, Pressure
Transducer. LVDT. etc. - The setup sequence is simple and quick using four push buttons only.
- Calibration mode: real-weight(stａnd weight) or
rated output(mv/v) from the sensor.
- Sampling speed: Appr. 100 times per second.
- Comparison function(Hi, Lo)
- Small size
- DIN size
- 72 x 72 x 111mm
| |||||||||||||||||||||||||||||||||||||||||||||||||
|
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智能制造網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
