當前位置：中山市泰倫特電子科技有限公司>>其它>>其它>>7110-MTF SS, MLSS, Density Meters

7110-MTF SS, MLSS, Density Meters

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質經銷商

所在地中山市

在線詢價 收藏產品查看聯系電話

聯系方式：黃玲查看聯系方式

更新時間：2024-10-24 13:09:14瀏覽次數：65次

聯系我時，請告知來自智能制造網

產品分類 品牌分類

暫無信息

中山市泰倫特電子科技有限公司

經營模式：經銷商

商鋪產品：2203條

所在地區：廣東

聯系人：黃玲（業務）

詢價 給他留言

產品簡介

詳細介紹

SS, MLSS, Density Meters

Large selection of sensors for four-beam pulsed light systems
Large two line LC display for set-up and measured value display
Large additional LED display for separate measured value display
Large concentration range from 2 FNU ot 150g/l
Measuring units : g/l, mg/l, TEF, ppm, %
Menu-controlled set-up and calibration in plain text
Five relay outputs ( sensor cleaning, error message, two freely configurable limit contacts, Hold )
Battery-powered measured value storage
One or two channel versions

Model 7110-MTF
The Model 7110 is a continuous on line transmitter that measures suspended solids content or turbidity. Depending on
the sensor model selected, the measurement is displayed in mg/l, ppm, g/l, % or NTU. The principle of measurement is
a patented light absorption method or scattered light technique. Two monochromatic LED's are pulsed at a frequency of
several kilohertz. The signals from the two photo detectors are separately converted into logarithmic functions and analyzed
relative to each other. This reliable field proven measurement technique compensates for sensor fouling and aging of the
optical components.
Model 7110-MTF Suspended Solids / Turbidity Transmitter
Range Selection NTU, g/l, mg/l, ppm, %
Measuring Range See sensor Specifications
Power Supply 115 Vac, 50/60 Hz or 24Vac/dc
Power Consumption 20 VA
Accuracy 1.0%
Repeatability 0.5%
Output Isolated 0-20 mA or 4-20 mA
Max Load 500 Ohms
Alarms 2 Input contacts,
1 sensor cleaning contact,
1 diagnostic contact.
Contact Rating 230 Vac, 3.0 A
Operating Temperature -20° to 60°C (-4° to 140°F)
Enclosure Rating IP65 (NEMA 4X)
Weight 1.6kg (3.5 lbs.)
General Sensor Specifications
Measurement Principle Four beam pulsed infrared light
Wave Length 880-920 nm
Light Source Infrared LED's
Sample Temperature 0-50°C (32-122°F)
Sample Pressure 6 bar (87 psi)
Insertion Sensor Cable Length 0.8m (2.5 ft.), includes 10m (32.8 ft.) extension cable
Submersion Sensor Cable Length 13.0m (42.5 ft.)
Maximum Distance Sensor to Transmitter 200m (656 ft.)
Materials of Construction 316 SS/POM/Epoxy
Applications
• Primary and Secondary Clarifiers
• Return and Waste Activated Sludge Concentration
• Mixed Liquor
• Centrifuge Effluent Concentration
• Aeration Basins
• Final Effluent