PLC 工控機 嵌入式系統 人機界面 工業以太網 現場總線 變頻器 機器視覺 DCS PAC/PLMC SCADA 工業軟件 ICS信息安全 應用方案 無線通訊
中山市泰倫特電子科技有限公司
中山市泰倫特電子科技有限公司
暫無信息 |
MR-ASC交流信號隔離器ACsignalisolationconverter(1ch)ThisisaconvererterusedtoconverttoDCsignalbyusinginputsignalsourceofACsignal
MR-ASC交流信號隔離器 AC signal isolation converter (1ch)
This is a convererter used to convert to DC signal
by using input signal source of AC signal.
Correct signal transfer without noise is enabled
with built-in filter circuits.
FEATURES
Small size(mm) : 83(H), 51(W), 102(D).
Isolation : input to output to power supply.
Power supply : AC or DC supply.
Wiring : terminal socket wiring.
Case & color : black ABS plastic case.
Weight : about 400g
MR - ASC
INPUT SIGNAL SPECIFICATION
OUTPUT SIGNAL SPECIFICATION
Output voltage signal : 12VDC max.
Output voltage impedance : 2Kohm min.
Output voltage noise : 10mV p-p max.
Output current signal : 30mADC max.
Output load resistance : 750ohm max.
Output current noise(250ohm load) : 10mV p-p.
GENERAL SPECIFICATION'S
Operating ambient temperature : 0 - 50'C.
Non operating ambient temperature : -20 ~ 80'C.
Temperature coefficient : 0.015%/'C.
Operating ambient humidity : 90% RH max.(non condensing)
Insulation resistance : greater than 100Mohm with 500VDC.
Dielectric strength : 1500VAC @ 1minute (input to output to power).
Adjustment range : 20% (zero & span) min.
Conversion accuracy : 0.2% max.
Response time : 0 - 90%(0.5sec).
OUTPUT IMPEDANCE OUTPUT LOAD - R
0 - 1VDC
0 - 5VDC
1 - 5VDC
0 - 10VDC
0 - 1mA
0 - 20mA
1 - 5mA
4 - 20mA
> 1Kohm
> 2Kohm
> 2Kohm
> 4Kohm
< 15Kohm
< 750ohm
< 3Kohm
< 750ohm
Input signal : 500Vac or 5Aac max.
Input signal loss : 0.5VA.
Operating range : 0 - 110%.
Permissible over range : 200% 1minute.
This is a convererter used to convert to DC signal
by using input signal source of AC signal.
Correct signal transfer without noise is enabled
with built-in filter circuits.
DISPLAY (OPTION)
Type : 3 digit FND
Display font : red super bright
Display function's : input or output or percent(%).
Display error : 1digit(LSB).
DISPLAY SIGNAL
1 : Input signal
2 : Output signal
3 : Percent(%)
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智能制造網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
