當前位置：中山市泰倫特電子科技有限公司>>傳感器類>>溫濕度傳感器>>GOH-420 GOH-110 GOHO-420戶外用濕度變送器

GOH-420 GOH-110 GOHO-420戶外用濕度變送器

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質經銷商

所在地中山市

在線詢價 收藏產品查看聯系電話

聯系方式：黃玲查看聯系方式

更新時間：2024-10-29 10:01:01瀏覽次數：88次

聯系我時，請告知來自智能制造網

產品分類 品牌分類

暫無信息

中山市泰倫特電子科技有限公司

經營模式：經銷商

商鋪產品：2203條

所在地區：廣東

聯系人：黃玲（業務）

詢價 給他留言

產品簡介

GOH-420 GOH-110 GOHO-420戶外用濕度變送器

詳細介紹

OUTSIDE HUMIDITY TRANSMITTER(GOH-420)

"GOH" Outside Humidity Transmitters are intended for an electronic Humidity Transmitter to measure the outside Relative Humidity (RH) and convert the measurement into an electric signal.

This unit can be used with all system equipments that can receive output signals 4 ~ 20mA DC of the detector.

This Transmitter senses relative humidity by chargeable humidity sensing element which
varies electrical capacity depending on circumstantial relative humidity
Electronic sensing circuit varies signal into 4 ~ 20mA DC ( within 0 ~ 99% relative humidity )
Sensing Accuracy is ±3% within usable range of 20 ~ 90% Rh

SUPPLY VOLTAGE	: 24V AC/DC ±20%

FREQUENCY	: 50 or 60㎐
SENSING ELEMENT	: Integrated Circuity

POWER CONSUMPTION	: 0.35VA

SENSING RANGE	: 0 ~ 99% Rh

ACCURACY	: 20°C at 20~90%Rh with in ±3%Rh

OUTPUT SIGNAL	: 4 ~ 20mA DC

SENSING TIME	: Apprx. 20 sec.


AMBIENT TEMPERATURE	: 1) On Operation : -35 ~ +80℃ 2) On Transportation & Storage : -25 ~ +65°C

AMBIENT HUMIDITY	: 1) On Operation : below 99%Rh 2) On Transportation & Storage : below 95% Rh

WIRING	: wires, 1.0㎟ or Shield Cable

WEIGHT	: 0.06Kg

HOUSING	: plastic case
PROTECTION CLASS	: IP 30

The element must not be touched and should be protected from dust, water, spray and condensation.
The sensor element must not be exposed to organic solvents, sylphid bearing materials.
Select a location approx 1.5 meter above the floor.
The sensor location should also be reasonably clean and free from damp and condensation.
Fix with the bolts provided in pull box ( 50×100, 100×100 )
To avoid the conductive current the wires should be separated from power lines.
Use the shield line when wiring

OUTSIDE HUMIDITY TRANSMITTER(GOH-110)

"GOH" Outside Humidity Transmitters are intended for an electronic Humidity Transmitter to measure the outside Relative Humidity (RH) and convert the measurement into an electric signal.

This unit can be used with all system equipments that can receive output signals 0 ~ 10V DC of the detector.

This Transmitter senses relative humidity by chargeable humidity sensing element which
varies electrical capacity depending on circumstantial relative humidity
Electronic sensing circuit varies signal into 0 ~ 10V DC ( within 0 ~ 99% relative humidity )
Sensing Accuracy is ±3% within usable range of 20 ~ 90% Rh

SUPPLY VOLTAGE	: 24V AC/DC ±20%

FREQUENCY	: 50 or 60㎐
SENSING ELEMENT	: Integrated Circuity

POWER CONSUMPTION	: 0.35VA

SENSING RANGE	: 0 ~ 99% Rh

ACCURACY	: 20°C at 20~90%Rh with in ±3%Rh

OUTPUT SIGNAL	: 0 ~ 10V DC( 0 ~ 1V DC)

SENSING TIME	: Apprx. 20 sec


AMBIENT TEMPERATURE	: 1) On Operation : -35 ~ +80℃ 2) On Transportation & Storage : -25 ~ +65°C

AMBIENT HUMIDITY	: 1) On Operation : below 99%Rh 2) On Transportation & Storage : below 95% Rh

WIRING	: wires, 1.0㎟ or Shield Cable

WEIGHT	: 0.06Kg

HOUSING	: plastic case
PROTECTION CLASS	: IP 30

OUTSIDE HUMIDITY TRANSMITTER(GOHO-420)

“GOHO" Outside Air Humidity Transmitter is intended for installing at the place of Heating, Ventilation facilities specially at the place needed to be pleasantness, and used for sensing humidity of outside air possible to be used by connecting with central control system.

SUPPLY VOLTAGE	: 15 ~ 30V DC

OUTPUT SIGNAL	: 4 ~ 20 mA

POWER CONSUMPTION	: 0.35VA

SENSING RANGE	: 0 ~ 99% Rh
SENSING ELEMENT	: Integrated Circuity

ACCURACY	: 20°C at 20~90%Rh with in ±3%Rh
WIRING	: 2 Wire


SENSING TIME	: 1 minapprx.


AMBIENT TEMPERATURE	: 1) On Operation : -30 ~ +70℃ 2) On Transportation & Storage : -20 ~ +50°C

AMBIENT HUMIDITY	: 1) On Operation : below 99%Rh 2) On Transportation & Storage : below 95% Rh


WEIGHT	: 0.08Kg

PROTECTION CLASS	: IP 30

Install Location : Inside wall of good air ventilating place
Prohibited Location : Inside corner, shelves, behind curtain or nearby reverse side of heat source.
- Keep away from direct light and the end of wire tube of Sensor should be shielded to protect.
any error from ventilating air coming through wire tube
Calibration : As adjusted on delivery from factory, do not change voluntarily