PLC 工控機 嵌入式系統 人機界面 工業以太網 現場總線 變頻器 機器視覺 DCS PAC/PLMC SCADA 工業軟件 ICS信息安全 應用方案 無線通訊
中山市泰倫特電子科技有限公司
中山市泰倫特電子科技有限公司
暫無信息 |
MR-ADD直流信號隔離器變送器DC signal ADD isolation converter
MR-ADD 直流信號隔離器變送器DC signal ADD isolation converter (1ch)
This converter is a converter to output average
summed values of both signals by using two
types of DC signal as input signal source.
With built-in noise removal filter, transfers correct
signal, and precision isolation circuits enable
perfect signal transfer not affected by withstand
insulation voltage, transfer speed, noise, etc.
FEATURES
Small size(mm) : 83(H), 51(W), 102(D).
Isolation : input to output to power supply.
Power supply : AC or DC supply.
Wiring : terminal socket wiring.
Case & color : black ABS plastic case.
Weight : about 400g
MR - ADD
INPUT SIGNAL SPECIFICATION
OUTPUT SIGNAL SPECIFICATION
Output voltage signal : 12VDC max.
Output voltage impedance : 2Kohm min.
Output voltage noise : 10mV p-p max.
Output current signal : 30mADC max.
Output load resistance : 750ohm max.
Output current noise(250ohm load) : 10mV p-p.
GENERAL SPECIFICATION'S
Operating ambient temperature : 0 - 50'C.
Non operating ambient temperature : -20 ~ 80'C.
Temperature coefficient : 0.015%/'C.
Operating ambient humidity : 90% RH max.(non condensing)
Insulation resistance : greater than 100Mohm with 500VDC.
Dielectric strength : 1500VAC @ 1minute (input to output to power).
Adjustment range : 20% (zero & span) min.
Conversion accuracy : 0.2% max.
Response time : 0 - 90%(0.5sec).
OUTPUT IMPEDANCE OUTPUT LOAD - R
0 - 1VDC
0 - 5VDC
1 - 5VDC
0 - 10VDC
0 - 1mA
0 - 20mA
1 - 5mA
4 - 20mA
> 1Kohm
> 2Kohm
> 2Kohm
> 4Kohm
< 15Kohm
< 750ohm
< 3Kohm
< 750ohm
Input voltage signal(A or B) : -300 ~ 300VDC.
Input voltage impedance : 1Mohm min.
Input current signal(A or B) : 30mADC max.
Input current resistance : 100ohm max. (at 20mA)
DISPLAY (OPTION)
Type : 3 digit FND
Display font : red super bright
Display function's : input or output or percent(%).
Display error : 1digit(LSB).
DISPLAY SIGNAL
1 : Input signal
2 : Output signal
3 : Percent(%)
INPUT SIGNAL - B
1 : 4 - 20mADC
2 : Specify current
3 : 1 - 5VDC
4 : Specify voltage
This converter is a converter to output average
summed values of both signals by using two
types of DC signal as input signal source.
With built-in noise removal filter, transfers correct
signal, and precision isolation circuits enable
perfect signal transfer not affected by withstand
insulation voltage, transfer speed, noise, etc.
[MR-RVC] DC signal reverse isolation converter (1ch)
[MR-TCC] Thermocouple isolation converter (1ch)
[MR-SGD] Strain gauge (load cell) converter (1ch)
[MR-SHC] Sample(track) hold converter (1ch)
[MR-PHC] Peak hold converter (1ch)
[MR-FDC] Frequency to dc signal converter (1ch)
[MR-DFC] DC Signal to Frequency converter (1ch)
[MR-CPD] Isolation pulse distributer (1ch)
[MR-CPS] Isolation pulse scaler (1ch)
[MR-SRD] Square root extract converter (1ch)
[MR-PDC2] Isolation power distributor (2ch)
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智能制造網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
請輸驗證碼
