當前位置：中山市泰倫特電子科技有限公司>>傳感器類>>接近傳感器>>圓柱型接近開關/接近傳感器PROXIMITY SENSOR

圓柱型接近開關/接近傳感器PROXIMITY SENSOR

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質經銷商

所在地中山市

在線詢價 收藏產品查看聯系電話

聯系方式：黃玲查看聯系方式

更新時間：2024-11-01 08:11:55瀏覽次數：131次

聯系我時，請告知來自智能制造網

暫無信息

中山市泰倫特電子科技有限公司

經營模式：經銷商

商鋪產品：2203條

所在地區：廣東

聯系人：黃玲（業務）

詢價 給他留言

產品簡介

圓柱型接近開關/接近傳感器PROXIMITY SENSOR

詳細介紹

model	P-OR12		P-OR18		P-OR30
Shape	Shield Type	Non Shield Type	Shield Type	Non Shield Type	Shield Type	Non Shield Type
Shape
Dimension diagram (unit : mm)
출력형태	2DN 2DP	4DN 4DP	5DN 5DP	8DN 8DP	10DN 10DP	15DN 15DP
Detecting distance (mm)	2	4	5	8	10	15
Standard detecting object	12×12×1	12×12×1	18×18×1	25×25×1	30×30×1	45×45×1
Setting distance	0~1.4	0~2.8	0~3.5	0~5.6	0~7.0	0~10.5
Response frequency (Hz)	800	400	350	200	250	100
Power voltage	DC10~30V
Remaining voltage	1.5V below
Using current	10mA below(DC12V에서 무부하시-When No load at DC12V)
Leakage current	0.5mA below
Control current	200mA(저항성 부하-Resistant load), 100MA(유도성부하-Inductive load)
Protective circuit	전원 역 접속보호, 서어지 보호회로 내장 (Contact protection for inverse current, including of surge protection circuit)
Differential distance	검출거리의 10% 以下-below 10% of Detecting distance
Temperature declination	±10%
Ambient temperature and humidity	-10~55℃, 45~85%RH
Withstａnd vibration	f=55HZ, 진폭 1mm(X,Y,Z 각 방향 2시간) - Amplitude 1mm(X,Y,Z each Direction 2hour)
Withstａnd voltage	AC1500V 60HZ 1분간(1minute)
Withstａnd impact	50G 11ms(X,Y,Z 각 방향 3회 - X,Y,Z each Direction 3Times)
Withstａnd insulation	50MΩ 以下(절연저항계 DC500V용 기준 - Standard DC500V for Insulation resistance)
Protection level	IP67

1. Principle

		High-frequency oscillator type proximity sensor has detecting coil within detect face. If metal object is near or
		exist around this coil, inductance loss of detect coil is occur by flowing inductive current through access
		metal object due to electric inductive activity. By detecting this, output signal is generated. Metal object
		is suitable for detect object.)

2. Operating explanation

		After electric power supplied, vibration breadth of oscillating voltage oscillated at oscillation circuit goes up as
		its regular frequency then electrical magnetic field generated at detecting coil.
		After this, in case of metal approached then vibrating breadth of oscillating voltage goes down as inductive
		current of the metal increased and it’s near 0 voltage when it’s completely detected.
		Operating output part through output circuit amplified at amplification circuit detecting vibrating breadth of
		micro current therapy.