PLC 工控機 嵌入式系統 人機界面 工業以太網 現場總線 變頻器 機器視覺 DCS PAC/PLMC SCADA 工業軟件 ICS信息安全 應用方案 無線通訊
中山市泰倫特電子科技有限公司
中山市泰倫特電子科技有限公司
| 參 考 價 | 面議 |
產品型號
品 牌
廠商性質經銷商
所 在 地中山市
聯系方式：黃玲查看聯系方式
更新時間：2024-11-03 09:31:42瀏覽次數：75次
聯系我時，請告知來自 智能制造網暫無信息 |
[MR-PDC2]隔離電源分配器Isolationpowerdistributor(2ch)Thisconverterisusedtosupplypoweralltypesoftransmitterusedatthesiteandtooutputinsulatedsignalbyreceivingthesignal
[MR-PDC2]隔離電源分配器 Isolation power distributor (2ch)
This converter is used to supply power all types of
transmitter used at the site and to output insulated
signal by receiving the signal.
With built-in noise removal filter, transfers correct
signal, and precision isolation circuits enable
perfect signal transfer not affected by withstand
insulation voltage, transfer speed, noise, etc.
FEATURES
Small size(mm) : 83(H), 51(W), 102(D).
Isolation : input to output to power supply.
Power supply : AC or DC supply.
Wiring : terminal socket wiring.
Case & color : black ABS plastic case.
Weight : about 400g
MR - PDC2
INPUT SIGNAL SPECIFICATION
OUTPUT SIGNAL SPECIFICATION
Output voltage signal : 12VDC max.
Output voltage impedance : 2Kohm min.
Output voltage noise : 10mV p-p max.
Output current signal : 30mADC max.
Output load resistance : 750ohm max.
Output current noise(250ohm load) : 10mV p-p.
GENERAL SPECIFICATION'S
Operating ambient temperature : 0 - 50'C.
Non operating ambient temperature : -20 ~ 80'C.
Temperature coefficient : 0.015%/'C.
Operating ambient humidity : 90% RH max.(non condensing)
Insulation resistance : greater than 100Mohm with 500VDC.
Dielectric strength : 1500VAC @ 1minute (input/out1/out2/power).
Adjustment range : 20% (zero & span) min.
Conversion accuracy : 0.2% max.
Response time : 0 - 90%(0.5sec).
OUTPUT IMPEDANCE OUTPUT LOAD - R
0 - 1VDC
0 - 5VDC
1 - 5VDC
0 - 10VDC
0 - 1mA
0 - 20mA
1 - 5mA
4 - 20mA
> 1Kohm
> 2Kohm
> 2Kohm
> 4Kohm
< 15Kohm
< 750ohm
< 3Kohm
< 750ohm
Input current signal : 30mADC max.
Input current load resistance : 100ohm max.(at 20mA)
External power source : DC22~26V / 30mA Max.
DISPLAY (OPTION)
Type : 3 digit FND
Display font : red super bright
Display function's : input or output or percent(%).
Display error : 1digit(LSB).
DISPLAY SIGNAL
1 : Input signal
2 : Output signal
3 : Percent(%)
OUTPUT SIGNAL1
1 : 0 - 1mADC
2 : 0 - 20mADC
3 : 1 - 5mADC
4 : 4 - 20mADC
5 : 0 - 1VDC
6 : 0 - 5VDC
7 : 1 - 5VDC
8 : 0 - 10VDC
9 : Specify signal
DISPLAY & POWER DISTRIBUTOR 2OUT CONVERTER
This converter is used to supply power all types of
transmitter used at the site and to output insulated
signal by receiving the signal.
With built-in noise removal filter, transfers correct
signal, and precision isolation circuits enable
perfect signal transfer not affected by withstand
insulation voltage, transfer speed, noise, etc.
您感興趣的產品PRODUCTS YOU ARE INTERESTED IN
智能制造網 設計制作，未經允許翻錄必究 .? ? ?
請輸入賬號
請輸入密碼
