當前位置：中山市泰倫特電子科技有限公司>>儀器儀表>>液位控制器>>YS FS-C22-M5-4A 液位繼電器Floatless Switch

YS FS-C22-M5-4A 液位繼電器Floatless Switch

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質經銷商

所在地中山市

在線詢價收藏產品查看聯系電話

聯系方式：黃玲查看聯系方式

更新時間：2024-11-03 10:19:50瀏覽次數：106次

聯系我時，請告知來自智能制造網

暫無信息

中山市泰倫特電子科技有限公司

經營模式：經銷商

商鋪產品：2203條

所在地區：廣東

聯系人：黃玲（業務）

詢價 給他留言

產品簡介

AlarmingandindicatingbylampwhenwateroverflownAutomaticoperatingforwatersupplywhenidleprevented11Pinsockettype

詳細介紹

		Alarming and indicating by lamp when water overflown
		Automatic operating for water supply when idle prevented
		11Pin socket type, with small-sized model, easy for repairing and maintenance

YSFS-M5

Type	YS FS-C22-M5-4A
Rating Voltage	c
動作/復歸抵抗	Water Supply(drainage)	Water Overflow(Alarm)
	13.9KΩ/48.1KΩ	13.7KΩ/21.7KΩ
Ambient temperature	-25℃∼40℃
Relative humidity	45∼ 85%
Insulation resistance	below 100M¥Ø(at DC 500V. Meg)
Relay output contact Rating	AC 220V, 5A (resistance load)
Relay lifetime	Electrical : above 100,000 times, Mechanical : a bove 3,000,000 times

		Install 4pole electrode bar to water tank then Floatless Switch attaches panel finally connects magnet to
		switch.
		Select Magnet Switch according to motor capacity of pump.
		4~5Ø is suitable for electrode bar made of stainless or brass
		As to the length of electrode bar, select max and limits then set it.
		Connect it with reference to connection diagram on the next page.

		Be sure insulating on the electrode bar because removing insulating film on surface of electrode
		bar causes malfunction
		E3 Terminal of Electrode bar must be connected
		Fix 11pin socket and Floatless switch into key groove then tighten with hasp.

		Water supply & drainage common contact
		Water supply contact
		Drainage contact
		Alarm or lamp contact when water is overflown
		Common contact when water is overflown

		Motor pump automatically stops when water level
		reaches E1
		Motor pump automatically operates when water level
		is under E2
		Alarming (Indicating lamp) when water level reaches
		E4

		Motor pump automatically operates when water level
		reaches E1
		Motor pump automatically stops when water level is
		under E2
		Alarming(Indicating lamp) when water level reaches
		E4