寶德Burkert 0117型是一種直動式升降式銜鐵電磁閥，帶有相應的塑料外殼和一個具有 PTFE 涂層的隔膜。此設備可無需電流借助彈簧力關閉。接通時，磁芯受到吸引，由此克服彈簧力。閥門特別適合流量很小的、液態或氣態的侵蝕性介質。

The baode Burkert 0117 is a direct moving lifting armature electromagnetic valve with a corresponding plastic shell and a diaphragm with a PTFE coating. This device does not require a current to be turned off by the spring force. When connected, the core is attracted to overcome the spring force. Valves are especially suitable for small, liquid or gaseous corrosive media。

寶德電磁閥0117型 技術參數表

ETFE（乙烯-四氟乙烯共聚物）體材

聚四氟乙烯與三元乙丙橡膠密封材料-聚四氟乙烯與FKM

液體EPDM：聚四氟乙烯/堿、酸的濃度平均，洗衣洗滌和漂白

聚四氟乙烯/氟橡膠：酸、鹽溶液、堿氧化油和廢氣

流體的溫度- 10……+ 70°C

環境溫度55℃+zui大。zui大。

21 mm2 / s的粘度zui大。

閥體材質ETFE(TEFZEL)

密封材料PTFE與EPDM - PTFE與FKM

介質PTFE / EPDM:堿性，酸對中濃度，

清洗和漂白堿液

PTFE/ FKM:氧化酸和物質，鹽溶液，

油和廢氣

介質溫度-10…+ 70°C

Max。環境溫度zui大值。+ 55°C

Max。粘度21平方毫米/秒

Technical parameter list of baode solenoid valve 0117

ETFE (ethylene - tetrafluoroethylene copolymer) body material

Polytetrafluoroethylene and triethylene propylene rubber seal material

polytetrafluoroethylene and FKM

Liquid EPDM: polytetrafluoroethylene/alkali, acid concentration

On average, washing and bleaching

Polytetrafluoroethylene/fluorinated rubber: acid, salt solution, alkaline oxidation

Oil and gas

The temperature of the fluid - 10... + 70 ° c.

Ambient temperature of 55 ℃ + is the largest. Is the largest.

21 mm2 / s has the largest viscosity.

Body material ETFE(TEFZEL)

Sealing materials PTFE and EPDM - PTFE and FKM

Medium PTFE/EPDM: alkaline, acid pair concentration,

Wash and bleach lye

PTFE/FKM: oxidized acid and substance, salt solution,

Oil and gas

Dielectric temperature - 10... + 70 ° c.

Max. Maximum environmental temperature. + 55 ° c.

Max. Viscosity 21 square mm/SEC