智能制造網APP
智能制造網手機站
智能制造網小程序
智能制造網官微
智能制造網服務號
直播推薦
回放
回放
雕刻機主軸是一種可高速加工的電主軸，廣泛應用于一些中小型雕刻機設備中，主要用于高速雕刻、鉆孔、銑削、鉆孔等，涉及廣泛的行業。
Engraving machine spindle is a high-speed machining motorized spindle, which is widely used in some small and medium-sized engraving machine equipment. It is mainly used for high-speed engraving, drilling, milling, drilling, etc., involving a wide range of industries.
雕刻機主軸在這個行業中是一個比較準確的名稱，由于不同的位置，它可能不一樣，有些地方被稱為高速主軸，有些地方被稱為雕刻機主軸，有些地方實際上是相同的。
Engraving machine spindle is a more accurate name in this industry. It may be different due to different positions. Some places are called high-speed spindle, some places are called engraving machine spindle, and some places are actually the same.
雕刻機主軸水冷主軸與風冷主軸的區別：
Difference between water-cooled spindle and air-cooled spindle of engraving machine:
1.使用壽命、水冷主軸應注意維護、頻繁換水或使用工業用水冷卻器，這樣的主軸壽命比空冷主軸長得多！
1. Service life and water-cooled spindle should pay attention to maintenance, frequent water change or use of industrial water cooler. The service life of such spindle is much longer than that of air-cooled spindle!
2.精度，水冷主軸的軸向和徑向跳動基本低于0.003 mm，而氣冷主軸（國產）則遠低于0.003 mm！
2. Accuracy: the axial and radial runout of water-cooled spindle is basically lower than 0.003 mm, while that of air-cooled spindle (domestic) is far lower than 0.003 MM!
3.水冷，顧名思義，就是用水循環冷卻主軸高速旋轉所產生的熱量，這是很好的，因為水循環后的溫度（常用的試驗）不會超過40度；空氣冷卻的主軸使用風扇散熱，其效果肯定不如水冷的效果好。
3. Water cooling, as the name suggests, is to circulate water to cool the heat generated by the high-speed rotation of the main shaft, which is very good, because the temperature (commonly used test) after water circulation will not exceed 40 degrees; the effect of air-cooled main shaft using fan for heat dissipation is certainly not as good as that of water cooling.
本文由3050雕刻機為您提供，我們的網站是：/ 我們將以全心全意的熱情為您提供服務，歡迎您的訪問！
This article is provided by 3050 engraving machine. Our website is: / We will serve you with wholehearted enthusiasm. Welcome to visit!
關鍵詞：雕刻機
全年征稿/資訊合作
聯系郵箱：1271141964@qq.com
免責聲明
- 凡本網注明"來源：智能制造網"的所有作品，版權均屬于智能制造網，轉載請必須注明智能制造網，http://www.xashilian.com。違反者本網將追究相關法律責任。
- 企業發布的公司新聞、技術文章、資料下載等內容，如涉及侵權、違規遭投訴的，一律由發布企業自行承擔責任，本網有權刪除內容并追溯責任。
- 本網轉載并注明自其它來源的作品，目的在于傳遞更多信息，并不代表本網贊同其觀點或證實其內容的真實性，不承擔此類作品侵權行為的直接責任及連帶責任。其他媒體、網站或個人從本網轉載時，必須保留本網注明的作品來源，并自負版權等法律責任。
- 如涉及作品內容、版權等問題，請在作品發表之日起一周內與本網聯系，否則視為放棄相關權利。
浙公網安備 33010602000006號
智能制造網APP
智能制造網小程序
微信公眾號
2025長三角國際智能儀表/線纜產業博覽會
展會城市：滁州市展會時間：2025-11-11