When using the stone carving machine, we must pay attention to its operation and working environment, because this can ensure that the work is carried out in a more appropriate state and avoid the failure of mechanical equipment. The environment of the workshop is still relatively humid, so the engraving machine is easy to rust when it is idle, which is not conducive to the production of mechanical equipment. Therefore, we must take some methods in our daily life and try our best to avoid it. Stone carving machine is a high-tech electromechanical equipment, which has certain requirements for the working environment.

1、避免使用強電源、強磁場等嚴重影響石材雕刻機信號傳輸的設備。如：焊機、發射塔等。

1. Avoid using strong power supply, strong magnetic field and other equipment that seriously affect the signal transmission of stone engraving machine. Such as welding machine, launching tower, etc.

2、使用三芯電源，保證雕刻機良好的接地效果（接地線），減少干擾。

2. Use three core power supply to ensure good grounding effect (grounding wire) of engraving machine and reduce interference.

3、要求電壓穩定。如果可以用工業用電，盡量不要用民用用電，以免出現較大的波動。使用穩壓器更好。

3. Voltage stability is required. If industrial power can be used, try not to use civil power to avoid large fluctuations. It is better to use a voltage regulator.

4、機器不能在強酸強堿環境中長期工作。以上幾點是關于石材雕刻機使用的工作環境。對于這些環境，我們需要注意。因為我們以后使用石材雕刻機的時候，就可以在它的環境中工作了。

4. The machine cannot work in strong acid and alkali environment for a long time. The above points are about the working environment of stone carving machine. We need to pay attention to these environments. Because when we use the stone carving machine in the future, we can work in its environment.

5、鋼制零件的表面，如滾珠絲杠、滾動導軌的淬硬鋼滾道、鋼制緊固件等，應每隔幾天用布或蘸有黃油的棉花擦拭一次。對于其他部位，應經常觀察是否有弱銹蝕。如果用抹布蘸油擦拭，將是今后防銹的重中之重。

5. The surface of steel parts, such as ball screw, hardened steel raceway of rolling guide rail, steel fasteners, etc., shall be wiped with cloth or cotton dipped in butter every few days. For other parts, always observe whether there is weak corrosion. If you wipe it with a rag dipped in oil, it will be the top priority of rust prevention in the future.

6、鋁件表面也應每隔幾天用布蘸黃油擦拭，或噴一層清漆。并經常觀察是否有腐蝕現象。

6. The surface of aluminum parts shall also be wiped with cloth dipped in butter or sprayed with a layer of varnish every few days. And often observe whether there is corrosion.

7、冷卻水箱加滿乳化油，防止生銹，不要用清水。

7. Fill the cooling water tank with emulsified oil to prevent rust. Do not use clean water.

以上就是石材雕刻機在閑置時，一定要做好防護，以免生銹，影響機器設備的正常運行。那么，操作者在操作的時候，一定要進行維護保養，但是生銹的問題也要注意。

The above is that when the stone carving machine is idle, it must be protected to avoid rust and affect the normal operation of the machine and equipment. Then, the operator must carry out maintenance when operating, but pay attention to the problem of rust.

那么在選擇石材雕刻機的時候，可以咨詢雕刻機廠家，學習一些關于雕刻機的知識，對大家以后在使用的過程中很有幫助。選擇石材雕刻機的時候，可以來了解一下，在這方面還是做得不錯的，有豐富的生產經驗。在產品方面，大家可以放心，因為它也是做了多年的廠家。因為后期制造商的資質會得到保障，其服務行業比較齊全。公司也在不斷引進*的生產技術和生產工藝，開發生產高品質、高性價比的數控設備，持續為客戶創造更大的價值。

Then when choosing the stone carving machine, you can consult the carving machine manufacturer and learn some knowledge about the carving machine, which is very helpful for you in the process of using it in the future. When choosing stone carving machine, you can come to Jiabang CNC to understand. You are still doing well in this regard and have rich production experience. In terms of products, you can rest assured, because it has been a manufacturer for many years. Because the qualification of later manufacturers will be guaranteed, and its service industry is relatively complete. The company is also constantly introducing international advanced production technology and production technology, developing and producing high-quality and cost-effective CNC equipment, and continues to create greater value for customers.

以上就是今天帶給大家的知識，石材雕刻機專注行業多年，為用戶不斷的提供有價值的內容，更多內容請繼續關注我們：/

The above is the knowledge brought to you today. Stone carving machine has been focused on the industry for many years and has continuously provided users with valuable content. Please continue to pay attention to us for more content: /