After the elevator is used, it is necessary to cut off the power supply. In order to save time and effort, many consumers will press and hold the "sleep" button like watching the TV, which is a waste of electricity, and there will be unsafe factors. The third is the standby state. The household appliance system software is still in operation, which is prone to circuit failure, and is easy to be struck by lightning in thunderstorm weather.

勤打黃油。軸銷間的滑動摩擦力隨使用時間的提高而增加，有時候還伴隨噪雜的噪聲，無鹽黃油可減少磨擦，進而降低瞎忙的造成，節省電能。

Beat butter frequently. The sliding friction between the pins increases with the increase of service time, sometimes accompanied by noise. Salt-free butter can reduce friction, thus reducing the cause of busyness and saving electric energy.

禁止超重。額定值負載之內的運行，能夠確保機器設備正常工作，但許多消費者在使用時，一味追求高效率，在調節情況下乃至發生過載，那樣只有事半功倍，得不償失。

No overweight. The operation within the rated load can ensure the normal operation of the machinery and equipment, but many consumers blindly pursue high efficiency when using, and even overload under the condition of regulation, which will only get twice the result with half the effort, and the gain outweighs the loss.

搞好調試工作中。該試驗儀不但能檢測電動升降機的安全系數，而且還具備提早熱身運動的實際效果，使液壓缸、電機，特別是齒輪油，(冬天效果明顯)提早進入工作狀態，降低工作中摩擦阻力，節省電能。

Do a good job in commissioning. The tester can not only detect the safety factor of the electric elevator, but also have the practical effect of early warm-up movement, so that the hydraulic cylinder, motor, especially gear oil (obvious effect in winter) can enter the working state early, reduce the friction resistance in work, and save electric energy.

適當。這類操作方法，有有關工作經歷的人都知道，當提升到總體目標高度時，便會松掉升高按鍵，由于慣性力，鋁合金型材電動升降機還會繼續升高一段距離，因此，在日積月累的控制以后，在節電領域，才會有顯著的實際效果。

Appropriate. For this kind of operation method, people with relevant work experience know that when lifting to the overall target height, the lifting button will be released. Due to the inertia force, the aluminum alloy profile electric elevator will continue to rise for a certain distance. Therefore, after the accumulated control, there will be significant practical effects in the field of power saving.