隨著科技不斷，越來越多的機械作業代替手工作業，而切菜機的產品多樣化，讓很多人對切菜機產生混淆，且切菜機型號多，如果你沒有具體的購買哪一臺切菜機，那你先了解下結構和原理吧，

With the continuous advancement of science and technology, more and more mechanical operations replace manual operations, and the diversification of the products of the vegetable cutting machine has confused many people with the vegetable cutting machine, and there are many types of vegetable cutting machine. If you don't have a specific vegetable cutting machine to buy, you should first understａnd the structure and principle,

1.主要有機架、輸送帶、壓菜帶、切片機構、調速箱或塔輪調速機構組成。

1. It is mainly composed of frame, conveyor belt, vegetable pressing belt, slicing mechanism, speed regulating box or tower wheel speed regulating mechanism.

2.離心式切片機構用于瓜薯類硬菜的切片，片厚可在一定范圍內自由調節，豎刀部分可將葉類軟菜或切好的片加工成不同規格的塊丁、菱形等各種形狀。切菜長度通過“可調偏心輪”在一定范圍內任意調整。因豎刀模擬手工切菜原理，加工表面平整光滑，成型規則，被切蔬菜組織完好，保持新鮮。

2. The centrifugal slicing mechanism is used for slicing melon and potato hard vegetables. The thickness of the slices can be adjusted freely within a certain range. The vertical knife part can process leaf soft vegetables or cut slices into various shapes such as diced blocks and diamonds of different specifications. The cutting length can be adjusted arbitrarily within a certain range through the "adjustable eccentric wheel". Because the vertical knife simulates the principle of manual vegetable cutting, the processing surface is smooth and regular, and the cut vegetables are well organized and fresh.

3.工作前先試切，觀察所切蔬菜規格與要求規格是否一致，否則應調節切片厚度或切菜長度，符合要求后進行正常工作。

3. Try cutting before working, and observe whether the specification of the cut vegetables is consistent with the required specification. Otherwise, adjust the slice thickness or the length of the cut vegetables, and work normally after meeting the requirements.

4.大型切菜機的安裝豎刀：先轉動可調偏心輪，使刀架行至下死點后，再使刀架向上抬起1-2毫米，使豎刀與輸送帶接觸后，緊固螺母把豎刀緊固在刀架上。說明：刀架抬起高度可根據所切蔬菜自行掌握。如果刀架抬起高度小，蔬菜有可能連刀；如果刀架抬起高度過大，有可能切壞輸送帶。

4. Installation of vertical knife of large vegetable cutting machine: first turn the adjustable eccentric to make the knife rest travel to the bottom dead center, and then lift the knife rest up by 1-2 mm. After the vertical knife contacts the conveyor belt, fasten the nut to fasten the vertical knife on the knife rest. Note: the lifting height of the knife rest can be controlled according to the vegetables cut. If the lifting height of the knife rest is small, the vegetables may be even knives; If the lifting height of the knife rest is too high, the conveyor belt may be damaged.

5.切菜機調整：轉動可調偏心輪，松開連桿緊固螺釘，切細絲可移動支點，由外向里（此時開口應朝上），切粗絲時可移動支點，由里往外（此時開口應朝下），調好后緊固調整螺釘。

5. Adjustment of the vegetable cutting machine: turn the adjustable eccentric wheel, loosen the fastening screw of the connecting rod, and the movable fulcrum of the thin wire can be cut from the outside to the inside (at this time, the opening should face up). When cutting the thick wire, the movable fulcrum can be moved from the inside to the outside (at this time, the opening should face down). Tighten the adjusting screw after adjustment.

切菜機的結構原理可以在功率轉速等等方面詳細了解，準確購買適合自己的切菜機產品。更多相關事項就來關注我們網站吧。

The structure and principle of the vegetable cutting machine can be understood in detail in terms of power, speed and so on, and you can accurately buy your own vegetable cutting machine products. Follow our website for more related matters OK.