The assembly line configuration of clean vegetable processing equipment is completed according to the clean vegetable processing technology. Taking customer demａnd analysis as the starting point, Hengrui Food Machinery Co., Ltd. provides customers with a complete set of solutions for clean vegetable project demａnd analysis, clean vegetable processing scheme design, clean vegetable processing equipment R & D and manufacturing, clean vegetable processing assembly line equipment installation and commissioning and after-sales service.

挑揀切分：主要取出不可食用的部分，并將原料初步切分出料。單層或者雙層結構，采用食品級別的工作臺面，人工挑揀切分后將處理后物料通過輸送帶輸送到下一道工序，廢料通過拆卸的廢料斗排出。配套生產線使用，工位數可根據不同需求定制，生產效率明顯提高。

Picking and cutting: mainly take out the inedible part, and preliminarily cut and discharge the raw materials. The single-layer or double-layer structure adopts a food level worktable. After manual picking and cutting, the treated materials are transported to the next process through the conveyor belt, and the waste is discharged through the disassembled waste bucket. The number of stations can be customized according to different needs, and the production efficiency is significantly improved.

切割：切割是凈菜加工中的重要部分，傳統切割依靠可調速電機手動調節輸送帶速度達到切割不同規格尺寸，同時刀具較為鈍銼，切割面不光滑，易腐爛變質。利杰食品機械切割設備采用高速旋轉刀具，三維切割，切割表面光滑，易存儲。同時，可以通過更換快速更換刀具實現不同規格切割需求。

Cutting: cutting is an important part of clean vegetable processing. Traditional cutting relies on adjustable speed motor to manually adjust the speed of conveyor belt to cut different specifications and sizes. At the same time, the cutting tool is blunt and filing, and the cutting surface is not smooth and easy to rot. Lijie food machinery cutting equipment adopts high-speed rotating cutter for three-dimensional cutting, with smooth cutting surface and easy storage. At the same time, the cutting requirements of different specifications can be realized by changing the cutting tool quickly.

清洗：臥式混合螺旋水流清洗物料，物料分散均勻，螺旋水流分離物料與雜質，較重雜質集中沉積錐形槽體底部，輕質雜質通過槽體過濾裝置排出。物料隨水流出料，不傷及物料，后端采用震動輸送，上段配清水二次噴淋，提高清洗效果。 清洗采用多級清洗，一次清洗可選配臭氧發生裝置，殺滅細菌，分解農藥殘留；二次清洗可選配冰水機組，降低物料溫度，減緩物料呼吸輕度，延長存儲時間。

Cleaning: the materials are cleaned by horizontal mixed spiral water flow, and the materials are evenly dispersed. The spiral water flow separates the materials and impurities. The heavier impurities are concentrated at the bottom of the conical tank, and the light impurities are discharged through the tank filtering device. The materials are discharged with the water flow without damaging the materials. The rear end is transported by vibration, and the upper section is equipped with secondary spray of clean water to improve the cleaning effect. Multistage cleaning is adopted for cleaning. Ozone generator can be selected for one-time cleaning to kill bacteria and decompose pesticide residues; Ice water unit can be selected for secondary cleaning to reduce material temperature, slow down material respiration and prolong storage time.

保鮮：保鮮是凈菜加工中重要的環節。保鮮除在清洗中的冰水機組降低溫度外，首先采用變頻離心脫水脫去物料表面水分，通過變頻控制脫水時間和脫水速度，達到不同蔬菜的脫水需求。脫水完成后，采用氣調包裝完成最后的包裝工序，以惰性氣體置換包裝袋中的空氣，起到減緩物料呼吸的作用，延長存儲時間。

Fresh keeping: fresh keeping is an important link in clean vegetable processing. In addition to reducing the temperature of the ice water unit in cleaning, frequency conversion centrifugal dehydration is used to remove the surface moisture of materials, and the dehydration time and dehydration speed are controlled by frequency conversion to meet the dehydration needs of different vegetables. After dehydration, modified atmosphere packaging is used to complete the final packaging process, and inert gas is used to replace the air in the packaging bag to slow down the breathing of materials and prolong the storage time.